ETSI TS 102 486-1-3-2009 Intelligent Transport Systems (ITS) Road Transport and Traffic Telematics (RTTT) Test specifications for Dedicated Short Range Communication (DSRC) transmi_1.pdf

1、 ETSI TS 102 486-1-3 V1.2.2 (2009-05)Technical Specification Intelligent Transport Systems (ITS);Road Transport and Traffic Telematics (RTTT);Test specifications for Dedicated ShortRange Communication (DSRC) transmission equipment;Part 1: DSRC data link layer:medium access and logical link control;S

2、ub-Part 3: Abstract Test Suite (ATS) and partial PIXIT proformafloppy3 ETSI ETSI TS 102 486-1-3 V1.2.2 (2009-05) 2 Reference RTS/ITS-0040017 Keywords ITS, DSRC, MAC, LLC, protocol, testing, ATS, TTCN, PIXIT ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 F

3、ax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice Individual copies of the present document can be downloaded from: http:/www.etsi.org The present document may be made available in more than

4、 one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network

5、drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the prese

6、nt document, please send your comment to one of the following services: http:/portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. Europe

7、an Telecommunications Standards Institute 2009. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTM, TIPHONTM, the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Or

8、ganizational Partners. LTE is a Trade Mark of ETSI currently being registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 102 486-1-3 V1.2.2 (2009-05) 3 Contents Intellectual Pr

9、operty Rights8 Foreword.8 1 Scope 9 2 References 9 2.1 Normative references .9 2.2 Informative references10 3 Definitions and abbreviations.10 3.1 Definitions10 3.2 Abbreviations .10 4 Abstract Test Method (ATM).10 4.1 DSRC MAC layer Abstract Test Method (ATM) for OBU .10 4.1.1 Test architecture11 4

10、.2 DSRC MAC layer Abstract Test Method (ATM) for RSU 11 4.2.1 Test architecture11 4.3 DSRC LLC layer Abstract Test Method (ATM)12 4.3.1 Test architecture12 4.4 Test strategy .13 5 Untestable Test Purposes (TP) .13 6 ATS conventions13 6.1 Naming conventions.13 6.1.1 Declarations part.13 6.1.1.1 Gener

11、al13 6.1.1.2 Test suite operations14 6.1.1.3 Test suite parameter declarations 14 6.1.1.4 Test case selection expression definition 14 6.1.1.5 Test suite constant declarations.14 6.1.1.6 Test suite variable declarations .14 6.1.1.7 Test case variable declarations14 6.1.1.8 Timer declarations.14 6.1.

12、1.9 ASP type definitions .14 6.1.1.10 PDU type definitions.15 6.1.1.11 Co-ordination Message (CM) type definitions15 6.1.1.12 Alias definitions 15 6.1.2 Constraints part.15 6.1.2.1 General15 6.1.2.2 TTCN ASN.1 Constraints .15 6.1.2.3 TTCN ASP Constraints.15 6.1.2.4 TTCN PDU Constraints 15 6.1.3 Dyna

13、mic part 15 6.1.3.1 General15 6.1.3.2 Test Case (TC) identifier.15 6.1.3.3 Test step identifier.16 6.1.3.4 Default identifier .16 6.2 Implementation conventions 16 6.2.1 Declaration part 16 6.2.2 Constraint part 16 6.2.3 Dynamic part 16 Annex A (normative): Abstract Test Suite (ATS) for MAC OBU.18 A

14、.1 The TTCN Graphical form (TTCN.GR) 18 A.2 The TTCN Machine Processable form (TTCN.MP)18 ETSI ETSI TS 102 486-1-3 V1.2.2 (2009-05) 4 A.3 Specification of PTC1 18 A.3.1 General requirements .18 A.3.2 Additional requirements .18 Annex B (normative): Abstract Test Suite (ATS) for MAC RSU20 B.1 The TTC

15、N Graphical form (TTCN.GR) 20 B.2 The TTCN Machine Processable form (TTCN.MP)20 B.3 Specification of PTC1 20 B.3.1 General requirements .20 B.3.2 Additional requirements .20 Annex C (normative): Abstract Test Suite (ATS) for LLC OBU 21 C.1 The TTCN Graphical form (TTCN.GR) 21 C.2 The TTCN Machine Pr

16、ocessable form (TTCN.MP)21 Annex D (normative): Abstract Test Suite (ATS) for LLC RSU.22 D.1 The TTCN Graphical form (TTCN.GR) 22 D.2 The TTCN Machine Processable form (TTCN.MP)22 Annex E (normative): Partial PIXIT proforma for MAC OBU23 E.1 Identification summary.23 E.2 ATS summary 23 E.3 Test labo

17、ratory23 E.4 Client identification23 E.5 SUT 24 E.6 Protocol layer information24 E.6.1 Protocol identification 24 E.6.2 IUT information .24 Annex F (normative): Partial PIXIT proforma for MAC RSU.25 F.1 Identification summary.25 F.2 ATS summary 25 F.3 Test laboratory25 F.4 Client identification25 F.

18、5 SUT 26 F.6 Protocol layer information26 F.6.1 Protocol identification 26 F.6.2 IUT information .26 Annex G (normative): Partial PIXIT proforma for LLC OBU .27 G.1 Identification summary.27 G.2 ATS summary 27 G.3 Test laboratory27 G.4 Client identification27 G.5 SUT 28 G.6 Protocol layer informatio

19、n28 G.6.1 Protocol identification 28 ETSI ETSI TS 102 486-1-3 V1.2.2 (2009-05) 5 G.6.2 IUT information .29 Annex H (normative): Partial PIXIT proforma for LLC RSU30 H.1 Identification summary.30 H.2 ATS summary 30 H.3 Test laboratory30 H.4 Client identification30 H.5 SUT 31 H.6 Protocol layer inform

20、ation31 H.6.1 Protocol identification 31 H.6.2 IUT information .32 Annex I (normative): PCTR Proforma for MAC OBU.33 I.1 Identification summary.33 I.1.1 Protocol conformance test report33 I.1.2 IUT identification.33 I.1.3 Testing environment.33 I.1.4 Limits and reservation34 I.1.5 Comments.34 I.2 IU

21、T Conformance status 34 I.3 Static conformance summary .34 I.4 Dynamic conformance summary35 I.5 Static conformance review report.35 I.6 Test campaign report36 I.7 Observations.36 Annex J (normative): PCTR Proforma for MAC RSU .37 J.1 Identification summary.37 J.1.1 Protocol conformance test report3

22、7 J.1.2 IUT identification.37 J.1.3 Testing environment.37 J.1.4 Limits and reservation38 J.1.5 Comments.38 J.2 IUT Conformance status 38 J.3 Static conformance summary .38 J.4 Dynamic conformance summary39 J.5 Static conformance review report.39 J.6 Test campaign report40 J.7 Observations.40 Annex

23、K (normative): PCTR Proforma for LLC OBU41 K.1 Identification summary.41 K.1.1 Protocol conformance test report41 K.1.2 IUT identification.41 K.1.3 Testing environment.41 K.1.4 Limits and reservation42 K.1.5 Comments.42 K.2 IUT Conformance status 42 ETSI ETSI TS 102 486-1-3 V1.2.2 (2009-05) 6 K.3 St

24、atic conformance summary .42 K.4 Dynamic conformance summary43 K.5 Static conformance review report.43 K.6 Test campaign report43 K.7 Observations.44 Annex L (normative): PCTR Proforma for LLC RSU.45 L.1 Identification summary.45 L.1.1 Protocol conformance test report45 L.1.2 IUT identification.45 L

25、.1.3 Testing environment.45 L.1.4 Limits and reservation46 L.1.5 Comments.46 L.2 IUT Conformance status 46 L.3 Static conformance summary .46 L.4 Dynamic conformance summary47 L.5 Static conformance review report.47 L.6 Test campaign report47 L.7 Observations.48 Annex M (normative): Profile requirem

26、ents for MAC OBU49 M.1 Generic test cases .49 M.2 Specific test cases.49 M.3 Non relevant test cases .49 M.4 Modified test campaign report .50 M.5 Observations.50 Annex N (normative): Profile requirements for MAC RSU 51 N.1 Generic test cases .51 N.2 Specific test cases.51 N.3 Non relevant test case

27、s .51 N.4 Modified test campaign report .52 N.5 Observations.52 Annex O (normative): Profile requirements for LLC OBU .53 O.1 Generic test cases .53 O.2 Specific test cases.53 O.3 Non relevant test cases .53 O.4 Modified test campaign report .53 O.5 Observations.54 Annex P (normative): Profile requi

28、rements for LLC RSU55 P.1 Generic test cases .55 P.2 Specific test cases.55 ETSI ETSI TS 102 486-1-3 V1.2.2 (2009-05) 7 P.3 Non relevant test cases .55 P.4 Modified test campaign report .55 P.5 Observations.56 Annex Q (informative): Bibliography.57 History 58 ETSI ETSI TS 102 486-1-3 V1.2.2 (2009-05

29、) 8Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Prope

30、rty Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, incl

31、uding IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) h

32、as been produced by ETSI Technical Committee Intelligent Transport System (ITS). The present document is part 1, sub-part 3 of a multi-part deliverable covering Intelligent Transport Systems (ITS); Dedicated Short Range Communication (DSRC); Data Link Control (DLC) layer as identified below: Part 1:

33、 “DSRC data link layer: medium access and logical link control“; Sub-part 1: “Protocol Implementation Conformance Statement (PICS) proforma specification“; Sub-part 2: “Test Suite Structure and Test Purposes (TSS Sub-part 3: “Abstract Test Suite (ATS) and partial PIXIT proforma“. Part 2: “DSRC appli

34、cation layer“. ETSI ETSI TS 102 486-1-3 V1.2.2 (2009-05) 9 1 Scope The present document contains the Abstract Test Suite (ATS) and partial PIXIT proforma to test the Dedicated Short Range Communication (DSRC); Data Link Control (DLC) layer. The objective of this test specification is to provide a ba

35、sis for conformance tests for DSRC equipment giving a high probability of inter-operability between different manufacturers equipment. The ISO standard for the methodology of conformance testing (ISO/IEC 9646-1 4, ISO/IEC 9646-2 5 and ISO/IEC 9646-3 6) as well as the ETSI rules for conformance testi

36、ng (ETS 300 406 3) are used as a basis for the test methodology. 2 References References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For a specific reference, subsequent revisions do not apply. Non-specific reference may be made on

37、ly to a complete document or a part thereof and only in the following cases: - if it is accepted that it will be possible to use all future changes of the referenced document for the purposes of the referring document; - for informative references. Referenced documents which are not found to be publ

38、icly available in the expected location might be found at http:/docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee their long term validity. 2.1 Normative references The following referenced documents are indispen

39、sable for the application of the present document. For dated references, only the edition cited applies. For non-specific references, the latest edition of the referenced document (including any amendments) applies. 1 CEN EN 12795 (2003): “Road transport and traffic telematics - Dedicated Short Rang

40、e Communication (DSRC) - DSRC data link layer: medium access and logical link control“. 2 CEN EN 13372 (2003): “Road transport and traffic telematics (RTTT) - Dedicated short-range communication - Profiles for RTTT applications“. 3 ETSI ETS 300 406: “Methods for Testing and Specification (MTS); Prot

41、ocol and profile conformance testing specifications; Standardization methodology“. 4 ISO/IEC 9646-1: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 1: General concepts“. 5 ISO/IEC 9646-2: “Information technology - Open Systems Interconne

42、ction - Conformance testing methodology and framework - Part 2: Abstract Test Suite Specification“. 6 ISO/IEC 9646-3: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 3: The Tree and Tabular Combined Notation (TTCN)“. 7 ISO/IEC 9646-5: “In

43、formation technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 5: Requirements on test laboratories and clients for the Conformance Assessment process“. ETSI ETSI TS 102 486-1-3 V1.2.2 (2009-05) 108 ISO/IEC 9646-6: “Information technology - Open Systems In

44、terconnection - Conformance testing methodology and framework - Part 6: Protocol Profile Test Specification“. 9 ISO/IEC 9646-7: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 7: Implementation Conformance statement“. 2.2 Informative refe

45、rences The following referenced documents are not essential to the use of the present document but they assist the user with regard to a particular subject area. For non-specific references, the latest version of the referenced document (including any amendments) applies. Not applicable. 3 Definitio

46、ns and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in ISO/IEC 9646-1 4, EN 12795 1, EN 13372 2 and the following apply: blocked signal: signal without clock and bit information, e.g. a very weak signal 3.2 Abbreviations For the purposes of

47、the present document, the abbreviations given in ISO/IEC 9646-1 4, ISO/IEC 9646-6 8, ISO/IEC 9646-7 9, EN 12795 1, EN 13372 2 and the following apply: ASP Abstract Service Primitive ATM Abstract Test Method ATS Abstract Test Suite BI Invalid BehaviourBV Valid Behaviour CM Co-ordination Message CP Co

48、-ordination Point IUT Implementation Under Test MTC Master Test Component PCO Point of Control and Observation PrWA MAC frame Private Window Allocation PrWRq MAC frame Private Window Request SAP Service Access Point SUT System Under Test TTCN Tree and Tabular Combined Notation UT Upper Tester 4 Abst

49、ract Test Method (ATM) 4.1 DSRC MAC layer Abstract Test Method (ATM) for OBU This clause describes the ATM used to test the DSRC MAC layer at the OBU side. ETSI ETSI TS 102 486-1-3 V1.2.2 (2009-05) 114.1.1 Test architecture Figure 1: Test architecture for OBU DSRC MAC layer A parallel testing concept is used, which consists of the following abstract testing parts: Tester: A test machine that is running a TTCN engine allowing parallel testing and having a standard DSRC Physical layer. SUT: System under test. MTC: Master test compo