ETSI TS 102 490-2014 Electromagnetic compatibility and Radio spectrum Matters (ERM) Peer-to-Peer Digital Private Mobile Radio using FDMA with a channel spacing of 6 25 kHz with e r.pdf

1、 ETSI TS 102 490 V1.8.1 (2014-06) Electromagnetic compatibility and Radio spectrum Matters (ERM); Peer-to-Peer Digital Private Mobile Radio using FDMA with a channel spacing of 6,25 kHz with e.r.p. of up to 500 mW Technical Specification ETSI ETSI TS 102 490 V1.8.1 (2014-06)2Reference RTS/ERM-TGDMR-

2、320 Keywords air interface, digital, FDMA, PMR, protocol, radio ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88

3、Important notice The present document can be downloaded from: http:/www.etsi.org The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorizatio

4、n of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be awar

5、e that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: htt

6、p:/portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modifi

7、ed without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2014. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of

8、 its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 102 490 V1.8.1 (2014-06)3Contents Intellectual Property Rights 6g3For

9、eword . 6g31 Scope 7g32 References 7g32.1 Normative references . 7g32.2 Informative references 7g33 Definitions, symbols and abbreviations . 8g33.1 Definitions 8g33.2 Symbols 9g33.3 Abbreviations . 9g34 Overview 10g34.1 Protocol architecture. 11g34.1.1 Air Interface Physical Layer (layer 1). 12g34.1

10、.2 Air Interface Data Link Layer (layer 2) 12g34.1.3 Air Interface Call Control Layer (layer 3) 12g34.2 FDMA Structure . 13g34.2.1 Overview of the transmission structure 13g34.2.2 Transmission format . 13g34.2.3 Transmission sequences 14g35 Frame coding 16g35.1 Superframe . 16g35.2 Header frame 17g3

11、5.3 End frame . 17g35.4 Packet data header 18g35.5 ACK frame . 18g35.6 Frame numbering . 19g35.7 Communication mode 19g35.8 Communication format . 19g35.9 SLD format . 19g35.9.1 Slow data in the voice superframe 19g35.9.2 Slow data field use with Type 1 or 2 data . 20g35.10 Call information . 21g35.

12、10.1 Call Information for powersave 21g35.10.2 Call Information for Types 1 and 2 data . 21g35.10.3 Call Information for Type 3 (packet) data 22g35.10.4 Call Information for system transactions 23g35.10.5 Call Information for acknowledgements . 23g35.11 Header type 23g35.12 End type . 24g35.13 ARQ .

13、 24g35.14 Tx Wait . 24g35.15 Status 25g35.16 Version V . 25g36 Synchronization 25g36.1 Frame synchronization . 25g36.1.1 FS1 25g36.1.2 FS2 25g36.1.3 FS3 26g36.1.4 FS4 26g36.1.5 Channel code 26g36.1.6 Preamble . 27g37 Interleaving and FEC coding 28g3ETSI ETSI TS 102 490 V1.8.1 (2014-06)47.1 Di-bit co

14、ding 28g37.2 CRC addition 28g37.3 Hamming code . 28g37.4 Scrambling . 28g37.5 Interleaving. 29g37.6 FEC coding of CCH (superframe) 30g37.7 FEC coding of HI (header information) . 30g37.8 FEC coding of END information . 31g38 Bearer services, tele-services and supplementary services 31g38.1 Initial m

15、ode 31g38.1.1 Initial addressing . 31g38.1.1.1 Common ID. 31g38.1.1.2 Fixed part of address . 32g38.1.2 ISF channel codes . 32g38.2 Configured mode 32g38.2.1 Call types 33g38.2.1.1 Individual call . 33g38.2.1.2 Group call 33g38.2.2 Addressing 33g38.2.3 CSF channel codes 33g38.3 Packet data 33g38.3.1

16、 Format . 33g38.3.2 Receiving party . 34g38.3.3 Packet frame coding 34g38.3.4 Data frame size . 35g38.3.5 Valid data length . 35g38.3.6 Data checksum 35g39 Channel coding process 37g39.1 Voice superframe . 38g39.2 Type 1 data superframe 41g39.3 Type 2 Data superframe . 43g39.4 Type 3 (Packet) Data f

17、rame 44g39.5 Headers . 46g39.6 End frames 47g310 Channel access . 48g310.1 Listen Before Transmit (LBT) 48g310.2 Hang time messages and timers . 49g310.2.1 Definition 49g310.2.2 Action by receiving stations 49g310.2.3 Break-in requests 49g310.3 Call duration timers 49g310.4 Transmit admit criteria .

18、 49g310.4.1 General admit criteria . 49g310.4.2 ISF admit criteria 50g310.4.3 CSF admit criteria . 50g310.5 Transmission re-tries 50g310.6 Channel access timers and constants 50g310.6.1 Timers . 50g310.6.2 Constants 51g311 Powersave . 51g311.1 Transmitted format . 51g311.2 Receive format . 52g312 Ph

19、ysical Layer 52g312.1 General parameters . 52g312.1.1 Frequency range 52g312.1.2 RF carrier bandwidth 52g312.1.3 Transmit frequency error 52g312.1.4 Time base clock drift error 52g312.2 Modulation . 52g3ETSI ETSI TS 102 490 V1.8.1 (2014-06)512.2.1 Symbols 52g312.2.2 4FSK generation . 53g312.2.2.1 De

20、viation index . 53g312.2.2.2 Square root raised cosine filter 54g312.2.2.3 4FSK Modulator . 55g3Annex A (normative): Standard User Interface for CSF radios 56g3A.1 Numbering and dialling plan 56g3A.1.1 Introduction to the numbering and dialling plan 56g3A.2 Subscriber mapping 57g3A.2.1 User Interfac

21、e - Air Interface . 57g3A.2.1.1 Mapping for MS address space . 58g3A.2.1.1.1 The concept of the wildcard character 58g3A.2.1.1.2 The concept of stored parameters 58g3A.2.1.1.3 The concept of ad-hoc arrangement 58g3A.2.1.1.4 The rules for the sender . 58g3A.2.1.1.5 The rules for the recipient . 59g3A

22、.2.1.1.6 Mapping of dialled strings to the AI address space . 59g3A.2.1.1.6.1 Mapping of numeric dialled strings to the AI address space . 59g3A.2.2 Addresses . 60g3A.2.3 Conversion rules . 60g3A.2.3.1 MS addresses 60g3A.2.3.2 Limiting the length of the destination address 61g3A.2.3.3 All talkgroup

23、address 61g3A.3 User dialling plan . 61g3A.3.1 User numbering 61g3A.3.1.1 Dialling method 61g3A.3.1.2 Call Type determination . 61g3A.3.1.3 Call modifier strings . 62g3A.3.2 Dialled digits to address mapping 62g3A.3.3 Storage requirements 62g3A.3.3.1 MS individual address 62g3A.3.3.2 Dialled Talkgro

24、ups . 63g3A.3.3.3 All MSs . 63g3A.3.3.4 Non-dialable numbers . 63g3A.3.3.5 Talkgroup recognition. 63g3A.3.3.5.1 All numeric talkgroups 63g3A.3.3.5.2 Talkgroups defined by wildcards 64g3A.3.3.5.3 MS receives a talkgroup call . 64g3A.3.4 Dialling procedures 64g3A.3.4.1 MS calls 64g3A.3.4.1.1 Seven dig

25、it dialling . 64g3A.3.4.1.2 Abbreviated dialling 64g3A.3.4.1.3 Masked dialling . 65g3A.3.4.1.4 Dialling with numbers and wildcards 65g3A.3.4.2 Call modifiers . 66g3A.3.4.2.1 Broadcast call 66g3A.3.4.2.2 Status call 66g3A.3.4.2.3 Force talkgroup service . 66g3A.3.4.3 Call set-up abandon or call compl

26、ete 66g3History 67g3ETSI ETSI TS 102 490 V1.8.1 (2014-06)6Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, a

27、nd can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/ipr.etsi.org). Pursuant to the

28、ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Forew

29、ord This Technical Specification (TS) has been produced by ETSI Technical Committee Electromagnetic compatibility and Radio spectrum Matters (ERM). ETSI ETSI TS 102 490 V1.8.1 (2014-06)71 Scope The present document covers digital private mobile radio equipment operating in peer-to-peer mode only. Th

30、e equipment is based on FDMA with channel spacing of 6,25 kHz supporting voice and data applications. It covers only hand portable equipment complying with EN 301 166-2 1 and having an integral antenna. This equipment is for use: i) In accordance with ECC/DEC/(05)12 i.1 on harmonized frequencies, te

31、chnical characteristics, exemption from individual licensing and free carriage and use of digital PMR 446 applications operating in the frequency band 446,100 MHz to 446,200 MHz. NOTE 1: The technical requirements for Digital PMR 446 included in ECC/DEC/(05)12 i.1 are: operation in the frequency ran

32、ge 446,100 MHz to 446,200 MHz, maximum e.r.p. of 500 mW, and a maximum transmitter time-out-time of 180 seconds. ii) In the frequency band 149,01875 MHz to 149,11875 MHz under exemption from individual licensing. NOTE 2: These requirements are: maximum e.r.p. of 500 mW, and a maximum transmitter tim

33、e-out-time of 180 seconds. 2 References References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the reference document (incl

34、uding any amendments) applies. Referenced documents which are not found to be publicly available in the expected location might be found at http:/docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee their long term

35、validity. 2.1 Normative references The following referenced documents are necessary for the application of the present document. 1 ETSI EN 301 166-2: “Electromagnetic compatibility and Radio spectrum Matters (ERM); Land Mobile Service; Radio equipment for analogue and/or digital communication (speec

36、h and/or data) and operating on narrow band channels and having an antenna connector; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R Land mobile service; Binary Interchange of Information and Signalling (BIIS) at 1200 bit/s (BIIS 1 200)“. 4 MPT 1327 (June 1997): “A Sig

37、nalling Standard for Trunked Private Land Mobile Radio Systems“. 2.2 Informative references The following referenced documents are not necessary for the application of the present document but they assist the user with regard to a particular subject area. i.1 CEPT ECC/DEC/(05)12: “ECC Decision of 28

38、 October 2005 on harmonized frequencies, technical characteristics, exemption from individual licensing and free carriage and use of digital PMR 446 applications operating in the frequency band 446.1-446.2 MHz“. ETSI ETSI TS 102 490 V1.8.1 (2014-06)83 Definitions, symbols and abbreviations 3.1 Defin

39、itions For the purposes of the present document, the following terms and definitions apply: bearer service: type of telecommunication service that provides the capability for the information transfer between user network interfaces, involving only low layer functions (layers 1 to 3 of the OSI model)

40、 NOTE: Confirmed Data and Unconfirmed Data are examples of bearer services. burst: short duration RF signal that may cause interference to a dPMR transmission item call: complete sequence of related transactions between radios NOTE: Transactions may be one or more items containing specific call rela

41、ted information. Configured Services and Facilities (CSF): those functions available in the radio after re-programming Control plane (C-plane): part of the protocol stack dedicated to control and data services feature: attribute intrinsic to a station, e.g. MS has an address Handportable Station (HS

42、): physical grouping that contains all of the mobile equipment that is used to obtain dPMR mobile services and operating with an integral antenna initial services and facilities: those functions available in the radio at point of sale (out-of-the box functions) late entry: where receiving stations t

43、hat have missed the start of a transmission are able to recover all information about the call from data that is interspersed within each superframe logical channel: distinct data path between logical endpoints payload: bits in the information field peer-to-peer mode: mode of operation where radios

44、may communicate outside the control of a network NOTE: This is communication technique where any radio unit may communicate with one or more other radio units without the need for any additional equipment (e.g. BS). personalization: address and configuration information that characterizes a particul

45、ar dPMR HS NOTE: This information may be implanted by the installer before putting an HS into service. physical channel: FDMA transmission polite protocol: Listen Before Transmit (LBT) protocol NOTE: This is a medium access protocol that implements a LBT function in order to ensure that the channel

46、is free before transmitting. prefix: most significant digit of a HS address in the user domain Protocol Data Unit (PDU): unit of information consisting of protocol control information (signalling) and possibly user data exchanged between peer protocol layer entities radio frequency channel: radio fr

47、equency carrier (RF carrier) NOTE: This is a specified portion of the RF spectrum. The RF carrier separation is 6,25 kHz. Received Signal Strength Indication (RSSI): root mean squared value of the signal received at the receiver antenna signalling: exchange of information specifically concerned with

48、 the establishment and control of connections, and with management, in a telecommunication network ETSI ETSI TS 102 490 V1.8.1 (2014-06)9simplex: mode of working by which information can be transferred in both directions but not at the same time NOTE: Simplex is also known as half duplex. superframe

49、: four concatenated FDMA frames NOTE: A superframe has a length of 320 ms. supplementary service: supplementary service modifies or supplements a tele-service or bearer service NOTE: Consequently, it cannot be offered to a user as a standalone service. It is offered together with or in association with a tele-service or bearer service. The same supplementary service may be common to a number of telecommunication services. Late entry is an example of supplementary service. telecommunication service: offered by a dPMR entity in order to satisfy a specific tele