ETSI TS 102 508-2006 Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN) Fixed network Multimedia Messaging Service (F-MMS) for IP net_1.pdf

1、 ETSI TS 102 508 V1.1.1 (2006-03)Technical Specification Telecommunications and Internet converged Services andProtocols for Advanced Networking (TISPAN);Fixed network Multimedia Messaging Service (F-MMS) for IP networks;Service descriptionETSI ETSI TS 102 508 V1.1.1 (2006-03) 2 Reference DTS/TISPAN

2、-01036-FMMS Keywords IP, multimedia, service, stage 1 ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important

3、notice Individual copies of the present document can be downloaded from: http:/www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Port

4、able Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Informatio

5、n on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http:/portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part ma

6、y be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2006. All rights reserved. DECTTM, PLUGTESTSTM and UMTSTM are Trade Marks of ETSI registered for the benefit of

7、 its Members. TIPHONTMand the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. ETSI ETSI TS 102 508 V1.1.1 (2006-03) 3 Content Intellectual

8、Property Rights5 Foreword.5 Introduction 5 1 Scope 7 2 References 7 3 Definitions and abbreviations.8 3.1 Definitions8 3.2 Abbreviations .8 4 Description .9 4.1 General .9 4.2 Legacy support .10 4.2.1 Legacy terminals supporting SMS10 4.2.2 Legacy terminals not supporting SMS10 4.3 Core service feat

9、ures 10 4.3.1 Address hiding10 4.3.2 User identification 10 4.4 Additional service features.10 4.4.1 MM Diversion (MMD).10 4.4.2 MM Copy (MMC) 11 4.4.3 Anonymous MM Rejection (AMMR) 11 4.4.4 Malicious MM IDentification (MMMID).11 4.4.5 Outgoing MM White List/Black List (OMMWL/OMMBL)11 4.4.6 Incoming

10、 MM White List/Black List (IMMWL/IMMBL).12 4.4.7 MM Distribution List (MMDL)12 5 Procedures 12 5.1 Provision and withdrawal.12 5.1.1 Subscription 12 5.2 Normal procedures .13 5.2.1 Registration and De-registration.13 5.2.1.1 Core requirements .13 5.2.1.2 Optional requirements.13 5.2.2 Activation and

11、 deactivation 13 5.2.2.1 Core requirements .13 5.2.2.2 Optional requirements.13 5.2.3 Invocation and operation 14 5.2.3.1 Outgoing message (MM Submission).14 5.2.3.1.1 Core requirements .14 5.2.3.1.2 Optional requirements .14 5.2.3.2 Incoming notification (MM Notification) .14 5.2.3.3 Incoming messa

12、ge (MM retrieval)14 5.2.3.3.1 Core requirements .14 5.2.3.3.2 Optional requirements .14 5.2.3.3.3 Terminal capability negotiation.15 5.2.3.4 MM delivery report.15 5.2.3.5 MM read report .15 5.2.4 Interrogation .15 5.2.4.1 Core requirements .15 5.2.4.2 Optional requirements.15 5.3 Exceptional procedu

13、res 16 5.3.1 Registration and erasure16 5.3.2 Activation and deactivation 16 5.3.3 Invocation and operation 16 5.3.3.1 Core requirements .16 ETSI ETSI TS 102 508 V1.1.1 (2006-03) 4 5.3.3.1.1 Outgoing message (MM submission)16 5.3.3.1.2 Incoming message (MM retrieval) 16 5.3.4 Interrogation .16 6 Int

14、erworking requirements .16 6.1 Interworking between the MMS service providers equipment and other networks.16 6.2 Interworking with private networks .16 7 Interactions with supplementary services.17 Annex A (informative): Bibliography.18 History 19 ETSI ETSI TS 102 508 V1.1.1 (2006-03) 5 Intellectua

15、l Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IP

16、Rs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR sear

17、ches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produc

18、ed by ETSI Technical Committee Telecommunications and Internet converged Services and Protocols for Advanced Networking (TISPAN). In accordance with ITU-T Recommendation I.130 1 the following three level structure is used to describe the supplementary telecommunication services as provided by Europe

19、an public telecommunications operators under the pan-European Integrated Services Digital Network (ISDN): stage 1: is an overall service description, from the users stand-point; stage 2: identifies the functional capabilities and information flows needed to support the service described in stage 1;

20、and stage 3: defines the signalling system protocols and switching functions needed to implement the service described in stage 1. The present document details the stage 1 aspects (overall service description) for the Fixed network Multimedia Messaging Service (F-MMS) for IP networks. Introduction T

21、he Short Message Service (SMS) has paved the way for a new approach to personal communication. Following the success in mobile telecommunication networks, SMS has also become in fixed line telecommunication networks a well-known feature. Based on ETSI standards, SMS offers the possibility of exchang

22、ing Short Messages within and between fixed line and mobile telecommunication networks. The Multimedia Messaging Service (MMS) in the mobile networks was created to provide a sophisticated kind of messaging which combines the advantages of both SMS and email messaging. The Multimedia Messaging Servi

23、ce (MMS) allows users to send and receive messages exploiting the whole array of media types available today e.g. text, images, audio, video and even streaming contents, while also making it possible to support new content types as they become popular. Similar to the Short Message Service (SMS), the

24、 Multimedia Messaging Service (MMS) is a non-real-time delivery system providing a store-and-forward mechanism. A good overview about the Multimedia Messaging Service can be found in TS 122 140 2. A multimedia message (MM) consists of one or more media elements (such as text, voice, image and video)

25、, and it is the combination of these media elements in an ordered synchronized manner that creates a multimedia presentation. The non-real-time multimedia messaging service shall be capable of supporting current and future multimedia messaging based services, and exploit the advances being made in t

26、he world multimedia community. The Multimedia Messaging Service (MMS) is a service that shall make it possible to offer seamless MMS over different networks (e.g. PSTN, ISDN, PLMN, NGN). ETSI ETSI TS 102 508 V1.1.1 (2006-03) 6 The Fixed network Multimedia Messaging Service follows the philosophy of

27、adopting the existing Multimedia Messaging Service of the mobile networks as widely as possible, to: simplify the interworking with the existing mobile net MMS; offer the same user experience for both fixed and mobile net users; reduce the fixed network MMS implementation efforts. The MMS enables a

28、unified application which integrates the composition, storage, access, and delivery of different kinds of media, e.g. text, voice, image or video. In the following of the present document it is assumed that both the sending and receiving Terminal Equipment (TE) have appropriate capabilities to send,

29、 receive, store, display and delete multimedia messages. ETSI ETSI TS 102 508 V1.1.1 (2006-03) 7 1 Scope The present document defines the stage 1 service description of the Fixed network Multimedia Messaging Service (F-MMS) using IP technology applicable to both NGN with an IMS and other IP networks

30、. Stage 1 is an overall service description, primarily from the users point of view, but does not deal with the details of the human interface itself. The present document includes information applicable to service providers and equipment manufacturers. Where the text indicates the status of a requi

31、rement, (i.e. a strict command or prohibition, an authorization leaving freedom or, a capability or possibility), this shall be reflected in the text of the relevant stage two and stage three standards. The present document describes only the Fixed network Multimedia Messaging Service (F-MMS) betwee

32、n a Multimedia Messaging Terminal Equipment (MM-TE) and a Multimedia Messaging Service Centre (MM-SC). Charging principles are outside the scope of the present document. The present document contains the core service features and also additional service features for the Fixed network Multimedia Mess

33、aging Service (F-MMS). A service may be provided on the basis of the core requirements alone. Furthermore, additional functionalities not covered in the present document may be implemented. The requirements of which are considered outside of the scope of the present document are consequently outside

34、 the scope of the corresponding stage 2 and stage 3 standards. Such additional functionalities may be on a network-wide basis, or particular to one user or a group of users. Such additional functionalities do not compromise conformance to the core requirements of the service. Personal Identification

35、 Number (PIN) security matters are outside the scope of the present document. Furthermore, conformance to the present document is met by conforming to the protocol standards with the field of application appropriate to the equipment being implemented. Therefore no method of testing is provided for t

36、he present document. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For a specifi

37、c reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. Referenced documents which are not found to be publicly available in the expected location might be found at http:/docbox.etsi.org/Reference. 1 ITU-T Recommendation I.130: “Method for the charac

38、terization of telecommunication services supported by an ISDN and network capabilities of an ISDN“. 2 ETSI TS 122 140: “Universal Mobile Telecommunications System (UMTS); Multimedia Messaging Service (MMS); Stage 1 (3GPP TS 22.140)“. 3 ETSI TR 102 314-6: “Fixed network Multimedia Messaging Service (

39、F-MMS); Part 6: Control strings (service codes) for MMS functions and MMS supplementary services“. 4 ETSI EN 300 650: “Integrated Services Digital Network (ISDN); Message Waiting Indication (MWI) supplementary service; Service description“. ETSI ETSI TS 102 508 V1.1.1 (2006-03) 8 3 Definitions and a

40、bbreviations 3.1 Definitions For the purposes of the present document, the following terms and definitions apply: broadband access: covers access types like xDSL, Cable, Satellite, etc. NOTE: The MMS communication is independent of the way how this broadband access is provided. destination MM-TE: te

41、rminal with MM functionalities on the receiving users side which allows to receive an MM notification and is able to retrieve an MM from the MM-SC serving the receiving user message element: message element is a part of an MM consisting of only one media type media format: within one media type diff

42、erent media formats are applicable for the media presentation, e.g. a picture can be GIF or JPEG format media type: media type refers to one form of presenting information to a user, e.g. voice or fax Multimedia Message (MM): multimedia message is a message composed of one or more message elements M

43、ultimedia Messaging Service Centre (MM-SC): function unit, which is responsible for the relaying and store-and-forwarding of a multimedia message between two multimedia messaging terminals NOTE: The MM-SC can functionally be separated from or integrated in the network. Multimedia Messaging Service E

44、nvironment (MM-SE): whole set of function units (e.g. MM-SC, gateway, database) which are necessary to perform the transmission of a multimedia message from an originating MM-TE to a destination MM-TE Multimedia Messaging Terminal Equipment (MM-TE): terminal equipment which has appropriate capabilit

45、ies to send, receive, store, display and delete multimedia messages network: term network shall be considered to include the fixed network and any functionality which may exist outside the fixed network (i.e. mobile network, internet and multimedia technologies etc.) originating MM-TE: terminal with

46、 MM functionalities on the sending users side which allows to submit an MM to an MM-SC receiving user: user who receives an MM notification on his/her destination MM-TE and can retrieve his/her MM from the MM-SC serving the receiving user registration: process of registering a terminal to the respec

47、tive server of the service provider/operator in order to be reachable by the service provider NOTE: The registration may be performed automatically by the terminal after the terminal has been switched on and established a connection to the IP network. sending user: user who submits an MM from his/he

48、r originating MM-TE to an MM-SC subscription: process of establishing a business relation between customer and service provider/operator. This process includes the provision of appropriate credentials to the user 3.2 Abbreviations For the purposes of the present document, the following abbreviations

49、 apply: AMMR Anonymous MM Rejection F-MMS Fixed network Multimedia Messaging Service GIF Graphics Interchange Format GSM Global System for Mobile communications IMMBL Incoming MM Black List ETSI ETSI TS 102 508 V1.1.1 (2006-03) 9 IMMWL Incoming MM White List IP Internet Protocol JPEG Joint Photographic Experts Group MM Multimedia Message MMC Meet-Me Conference MMD MM Diversion MMDL Multimedia Message Distribution List MMMID Malicious MM Identification MMS Multimedia Messaging Service MM-SC Multimedia Messaging Service Centre MM-SE Multimedia M