1、 ETSI TS 102 545-1 V1.2.1 (2009-02)Technical Specification Broadband Radio Access Networks (BRAN);HiperMAN;Conformance Testing for WiMAX/HiperMAN 1.3.1;Part 1: Protocol Implementation ConformanceStatement (PICS) proformaETSI ETSI TS 102 545-1 V1.2.1 (2009-02) 2 Reference RTS/BRAN-004T008-1-R1 Keywor
2、ds ATS, broadband, DLC, FWA, HiperMAN, MAC, point-to-multipoint, radio, testing ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse
3、 (06) N 7803/88 Important notice Individual copies of the present document can be downloaded from: http:/www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the ref
4、erence version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or ch
5、ange of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http:/portal.etsi.org/chaircor/ETSI_support.asp Copyrig
6、ht Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2009. WIMAX Forum 2009. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTM, TIPHONTM, t
7、he TIPHON logo and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. ETSI ETSI TS 102 545-1 V1.2.1 (2009-02) 3 Contents Intellectual Property Rights7 Forew
8、ord.7 1 Scope 8 2 References 8 2.1 Normative references .8 2.2 Informative references9 3 Definitions, symbols and abbreviations .9 3.1 Definitions9 3.2 Symbols10 3.3 Abbreviations .10 4 Conformance to this PICS Proforma Specification10 Annex A (normative): Protocol ICS (PICS) for HiperMAN/WiMAX- TWG
9、 profile11 A.1 Guidance for completing PICS Proforma.11 A.1.1 Purposes and Structure .11 A.1.2 Abbreviations and Conventions .11 A.1.3 Instructions for completing the PICS Proforma .13 A.2 Identification of the implementation 13 A.2.1 Date of statement13 A.2.2 Implementation Under Test (IUT) identif
10、ication .13 A.2.3 System Under Test (SUT) identification14 A.2.4 Product supplier14 A.2.5 Client (if different from product supplier)14 A.2.6 PICS contact person .14 A.3 Identification of the standard14 A.4 Global statement of conformance.14 A.5 System profiles.15 A.5.1 WirelessMAN-OFDMA 802.16e .15
11、 A.5.1.1 Mobile Station 17 A.5.1.1.1 PHY functions.17 A.5.1.1.1.1 m Factor.17 A.5.1.1.1.2 Cyclic Prefix17 A.5.1.1.1.3 Frame Duration17 A.5.1.1.1.4 UL and DL Subframe Size 18 A.5.1.1.1.5 Subcarrier Allocation Mode 19 A.5.1.1.1.6 UL Channel Sounding .19 A.5.1.1.1.7 Ranging and Band Width Request.19 A.
12、5.1.1.1.8 Fast Feedback 20 A.5.1.1.1.9 Channel Coding.20 A.5.1.1.1.10 HARQ21 A.5.1.1.1.11 Control Mechanism .23 A.5.1.1.1.12 Power Control23 A.5.1.1.1.13 Channel Quality Measurements.24 A.5.1.1.1.14 Modulation 24 A.5.1.1.1.15 MAP Support.25 A.5.1.1.1.16 Multiple Input Multiple Output (MIMO) 26 A.5.1
13、.1.1.17 MS Minimum Performance Requirements27 A.5.1.1.1.18 Minimum Transmit Requirements.32 A.5.1.1.1.19 Receive Requirements Table.33 A.5.1.1.2 MS MAC functions.33 A.5.1.1.2.1 Packet Convergence Sublayer .33 ETSI ETSI TS 102 545-1 V1.2.1 (2009-02) 4 A.5.1.1.2.2 MAC common part sub layer 34 A.5.1.2
14、Base Station 47 A.5.1.2.1 PHY functions.47 A.5.1.2.1.1 Sampling Factor.47 A.5.1.2.1.2 Cyclic Prefix48 A.5.1.2.1.3 Frame Duration48 A.5.1.2.1.4 TTG/RTG 48 A.5.1.2.1.5 UL and DL Subframe Size 49 A.5.1.2.1.6 Subcarrier Allocation Mode 50 A.5.1.2.1.7 UL Channel Sounding .50 A.5.1.2.1.8 Ranging and Band
15、Width Request.50 A.5.1.2.1.9 Fast Feedback 51 A.5.1.2.1.10 Channel Coding.51 A.5.1.2.1.11 HARQ52 A.5.1.2.1.12 Control Mechanism .52 A.5.1.2.1.13 Power Control53 A.5.1.2.1.14 Channel Quality Measurements.53 A.5.1.2.1.15 Modulation 53 A.5.1.2.1.16 MAP Support.55 A.5.1.2.1.17 Multiple Input Multiple Ou
16、tput (MIMO) 55 A.5.1.2.1.18 BS Performance Requirements56 A.5.1.2.1.19 Minimum Transmit Requirements.59 A.5.1.2.1.20 Receive Requirements .59 A.5.1.2.1.21 BS Synchronization.59 A.5.1.2.2 BS MAC functions60 A.5.1.2.2.1 Packet Convergence Sublayer .60 A.5.1.2.2.2 MAC common part sub layer 61 A.6 List
17、of PDUs, MAP IEs, sub-headers, and extended sub-headers74 A.6.1 PDUs for MAC layer74 A.6.1.1 PDUs for network entry and initialization 74 A.6.1.2 PDUs for service flows .75 A.6.1.3 PDUs for ARQ76 A.6.1.4 PDUs for miscellaneous capabilities 77 A.6.1.5 PDUs for security .78 A.6.1.6 PDUs for Sleep Mode
18、.79 A.6.1.7 PDUs for Handover 80 A.6.1.8 PDUs for Idle mode 81 A.6.1.9 PDUs for Feedback.81 A.6.1.10 PDUs and MAP IEs for Power Control 82 A.6.1.11 PDUs for band AMC 83 A.6.2 MAP IEs.84 A.7 PDU fields87 A.7.1 Fields of PDUs for MAC layer.87 A.7.1.1 DL-MAP.87 A.7.1.2 DCD88 A.7.1.3 UCD89 A.7.1.4 UL-MA
19、P.90 A.7.1.5 RNG-REQ and RNG-RSP 91 A.7.1.6 SBC-REQ and SBC-RSP92 A.7.1.7 ARQ messages94 A.7.1.8 RES-CMD.95 A.7.1.9 CLK-CMP.95 A.7.1.10 DREG-REQ and DREG-CMD .95 A.7.1.11 DSX-RVD.96 A.7.1.12 REP-REQ and REP-RSP 96 A.7.1.13 FPC .97 A.7.1.14 REG-REQ and REG-RSP.97 A.7.1.15 PKM-REQ and PKM-RSP Messages
20、 .99 A.7.1.16 DSA-REQ, DSA-RSP and DSA-ACK messages .102 A.7.1.17 DSC-REQ, DSC-RSP and DSC-ACK messages104 ETSI ETSI TS 102 545-1 V1.2.1 (2009-02) 5 A.7.1.18 DSD-REQ and DSD-RSP messages.105 A.7.1.19 TLVs for Handover, Sleep and Idle Mode105 A.7.1.20 MOB_NBR-ADV .107 A.7.1.21 MOB_SCN-REQ 108 A.7.1.2
21、2 MOB_SCN-RSP .108 A.7.1.23 MOB_SCN-REP.109 A.7.1.24 MOB_BSHO-REQ .109 A.7.1.25 MOB_BSHO-RSP 110 A.7.1.26 MOB_MSHO-REQ 110 A.7.1.27 MOB_HO-IND .110 A.7.1.28 PDUs fields for Idle Mode111 A.7.1.29 Feedback.111 A.7.1.30 NSP Selection .112 Annex B (normative): Protocol ICS (PICS) for HiperMAN/WiMAX- ETW
22、G profile .113 B.1 Guidance for completing PICS Proforma.113 B.1.1 Purposes and Structure .113 B.1.2 Abbreviations and Conventions .113 B.1.3 Instructions for completing the PICS Proforma .115 B.2 Identification of the implementation 115 B.2.1 Date of statement115 B.2.2 Implementation Under Test (IU
23、T) identification .115 B.2.3 System Under Test (SUT) identification115 B.2.4 Product supplier116 B.2.5 Client (if different from product supplier)116 B.2.6 PICS contact person .116 B.3 Identification of the standard116 B.4 Global statement of conformance.116 B.5 System profiles.117 B.5.1 WirelessMAN
24、-SC 117 B.5.2 WirelessMAN-SCa.117 B.5.3 WirelessMAN-OFDM and WirelessHUMAN-OFDM 117 B.5.3.1 MS in PMP topology 119 B.5.3.1.1 PHY functions.119 B.5.3.1.2 Convergence sub layer 127 B.5.3.1.3 MAC common part sub layer129 B.5.3.1.4 Construction and Transmission of MAC PDUs 130 B.5.3.1.5 MAC procedures f
25、or Mobility Management.136 B.5.3.1.5.1 Data delivery services136 B.5.3.1.5.2 Sleep Mode137 B.5.3.1.5.3 Neighbour advertisement.137 B.5.3.1.5.4 Handover .138 B.5.3.1.5.5 Idle Mode 139 B.5.3.1.6 Security .140 B.5.3.2 MS in MESH topology .142 B.5.3.3 BS in PMP topology .143 B.5.3.3.1 PHY functions.143
26、B.5.3.3.2 Convergence sub layer 149 B.5.3.3.3 MAC common part sub layer150 B.5.3.3.4 Construction and Transmission of MAC PDUs 151 B.5.3.3.5 MAC procedures for Mobility Management.157 B.5.3.3.5.1 Data delivery services157 B.5.3.3.5.2 Sleep Mode157 B.5.3.3.5.3 Network advertisement158 B.5.3.3.5.4 Han
27、dover .158 B.5.3.3.5.5 Idle Mode 160 B.5.3.3.6 Security .161 B.5.3.4 BS in MESH topology 163 B.5.4 WirelessMAN-OFDMA and WirelessHUMAN-OFDMA.163 ETSI ETSI TS 102 545-1 V1.2.1 (2009-02) 6 B.6 List of PDUs and their directions.164 B.6.1 Void164 B.6.2 PDUs for MAC layer164 B.6.2.1 PDUs for MAC layer in
28、 PMP topology164 B.6.2.1.1 PDUs for network entry and initialization in PMP .164 B.6.2.1.2 PDUs for service flows in PMP 165 B.6.2.1.3 PDUs for ARQ in PMP.166 B.6.2.1.4 PDUs for miscellaneous capabilities in PMP166 B.6.2.1.5 PDUs for privacy in PMP .167 B.6.2.1.6 PDUs for Mobility in PMP .168 B.6.2.
29、2 PDUs for MAC layer in MESH topology.168 B.7 PDU fields169 B.7.1 Fields of PDUs for MAC layer.169 B.7.1.1 PDUs fields for MAC in PMP topology .169 B.7.1.1.1 DL-MAP .169 B.7.1.1.2 DCD 170 B.7.1.1.3 UCD 171 B.7.1.1.4 UL-MAP .171 B.7.1.1.5 RNG-REQ and RNG-RSP 172 B.7.1.1.6 SBC-REQ and SBC-RSP 173 B.7.
30、1.1.7 DHCP messages174 B.7.1.1.8 Time of day messages .174 B.7.1.1.9 ARQ messages 174 B.7.1.1.10 MCA-REQ and MCA-RSP .175 B.7.1.1.11 DBPC-REQ and DBPC-RSP 176 B.7.1.1.12 RES-CMD.176 B.7.1.1.13 CLK-CMP.176 B.7.1.1.14 DREG-REQ and DREG-CMD177 B.7.1.1.15 DSX-RVD.177 B.7.1.1.16 TFTP-CPLT and TFTP-RSP.17
31、7 B.7.1.1.17 REP-REQ and REP-RSP.178 B.7.1.1.18 AAS-FBCK-REQ and AAS-FBCK-RSP178 B.7.1.1.19 AAS-BEAM messages179 B.7.1.1.20 FPC .179 B.7.1.1.21 REG-REQ and REG-RSP .180 B.7.1.1.22 PKM-REQ and PKM-RSP Messages .181 B.7.1.1.23 DSA-REQ, DSA-RSP and DSA-ACK messages183 B.7.1.1.24 DSC-REQ, DSC-RSP and DS
32、C-ACK messages 187 B.7.1.1.25 DSD-REQ and DSD-RSP messages .190 B.7.1.2 Additional fields of MAC PDUs in MESH topology .190 B.8 Parameters and timers 191 History 193 ETSI ETSI TS 102 545-1 V1.2.1 (2009-02) 7 Intellectual Property Rights IPRs essential or potentially essential to the present document
33、 may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETS
34、I standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence
35、 of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI Technical Committee Broadband Radio Access Networks (BRAN). The presen
36、t document specifies the Protocol Implementation Conformance Statement (PICS) for High PERformance Radio Metropolitan Area Network (HiperMAN) and WiMAX, which operates on frequencies between 2 GHz and 11 GHz. The present document has been developed on the basis of preceding versions of HiperMAN and
37、WiMAX PICS and makes the previous versions obsolete. The present document is part 1 of a multi-part deliverable covering Broadband Radio Access Networks (BRAN); HiperMAN; Conformance testing for WiMAX/HiperMAN 1.3.1, as identified below: Part 1: “Protocol Implementation Conformance Statement (PICS)
38、proforma“; Part 2: “Test Suite Structure and Test Purposes (TSS Part 3: “Abstract Test Suite (ATS)“. ETSI ETSI TS 102 545-1 V1.2.1 (2009-02) 8 1 Scope The present document specifies the Protocol Implementation Conformance Statement (PICS) for HiperMAN/WiMAX per ISO/IEC 9646-7 10, ITU-T Recommendatio
39、n X.296 11 and EG 201 058 12 for conformance of HiperMAN1.3.1/WiMAX compliant systems. 2 References References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For a specific reference, subsequent revisions do not apply. Non-specific re
40、ference may be made only to a complete document or a part thereof and only in the following cases: - if it is accepted that it will be possible to use all future changes of the referenced document for the purposes of the referring document; - for informative references. Referenced documents which ar
41、e not found to be publicly available in the expected location might be found at http:/docbox.etsi.org/Reference. For online referenced documents, information sufficient to identify and locate the source shall be provided. Preferably, the primary source of the referenced document should be cited, in
42、order to ensure traceability. Furthermore, the reference should, as far as possible, remain valid for the expected life of the document. The reference shall include the method of access to the referenced document and the full network address, with the same punctuation and use of upper case and lower
43、 case letters. NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee their long term validity. 2.1 Normative references The following referenced documents are indispensable for the application of the present document. For dated references, onl
44、y the edition cited applies. For non-specific references, the latest edition of the referenced document (including any amendments) applies. 1 ETSI TS 102 177: “Broadband Radio Access Networks (BRAN); HiperMAN; Physical (PHY) layer“. 2 ETSI TS 102 178: “Broadband Radio Access Networks (BRAN); HiperMA
45、N; Data Link Control (DLC) layer“. 3 ETSI TS 102 210: “Broadband Radio Access Networks (BRAN); HiperMAN; System profiles“. 4 IEEE 802.16-2004: “IEEE Standard for Local and Metropolitan Area Networks - Part 16: Air Interface for Fixed Broadband Wireless Access Systems“. 5 IEEE 802.16e-2005 and IEEE 8
46、02.16-2004/Cor 1-2005: “Standard for Local and metropolitan area networks - Part 16: Air Interface for Fixed and Mobile Broadband Wireless Access Systems. Amendment 2: Physical and Medium Access Control Layers for Combined Fixed and Mobile Operation in Licensed Bands and Corrigendum1“. 6 ETWG Profil
47、e: “Evolutionary WiMAX OFDM System Profile- WiMAX Forum“. 7 WiMAX ForumTM Mobile System Profile v16.1, “WiMAX ForumTM, Technical Working Group, April 2008“. ETSI ETSI TS 102 545-1 V1.2.1 (2009-02) 9 8 WiMAX ForumTM Mobile Radio Specifications v0.1.0, WiMAX ForumTM, Technical Working Group, April 200
48、8 . 9 ISO/IEC 9646-1: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 1: General concepts“. 10 ISO/IEC 9646-7: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 7: Implementation
49、 Conformance Statements“. 11 ITU-T Recommendation X.296: “OSI conformance testing methodology and framework for protocol Recommendations for ITU-T applications - Implementation conformance statements“. 12 ETSI EG 201 058: “Methods for Testing and Specification (MTS); Implementation Conformance Statement (ICS) proforma style guide“. 13 IEEE 802.3: “IEEE Standard for Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - specific requirements - Part 3: Carrier Sense Multip
copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
备案/许可证编号:苏ICP备17064731号-1