ETSI TS 102 587-2-2010 Electromagnetic compatibility and Radio spectrum Matters (ERM) Peer-to-Peer Digital Private Mobile Radio Part 2 Conformance testing Test Suite Structure and _1.pdf

1、 ETSI TS 102 587-2 V1.3.1 (2010-09)Technical Specification Electromagnetic compatibilityand Radio spectrum Matters (ERM);Peer-to-Peer Digital Private Mobile Radio;Part 2: Conformance testing; Test Suite Structure andTest Purposes (TSS Essential, or potentially Essential, IPRs notified to ETSI in res

2、pect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to th

3、e existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI Technical Committee Electromagnetic compatibility and Radio

4、 spectrum Matters (ERM). The present document is part 2 of a multi-part deliverable covering the Electromagnetic compatibility and Radio spectrum Matters (ERM); Peer-to-Peer Digital Private Mobile Radio, as identified below: Part 1: “Conformance testing; Protocol Implementation Conformance Statement

5、 (PICS) proforma“; Part 2: “Conformance testing; Test Suite Structure and Test Purposes (TSS Part 3: “Requirements catalogue“; Part 4: “Conformance testing; Abstract Test Suite (ATS)“; Part 5: “Interoperability testing; Interoperability Test Suite Structure and Test Purposes (TSS Part 6: “Interopera

6、bility testing; Test Descriptions (TD)“. ETSI ETSI TS 102 587-2 V1.3.1 (2010-09)51 Scope The present document specifies the conformance Test Purposes (TPs) for the Peer-to-Peer digital Private Mobile Radio (dPMR) standard, TS 102 490 1. TPs are defined using the TPLan notation described in ES 202 55

7、3 i.1. Test purposes have been written based on the test specification framework described in TS 102 351 2 and based on the methodology defined in ISO/IEC 9646-2 3. 2 References References are either specific (identified by date of publication and/or edition number or version number) or non-specific

8、. For specific references, only the cited version applies. For non-specific references, the latest version of the reference document (including any amendments) applies. Referenced documents which are not found to be publicly available in the expected location might be found at http:/docbox.etsi.org/

9、Reference. NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee their long term validity. 2.1 Normative references The following referenced documents are necessary for the application of the present document. 1 ETSI TS 102 490 (V1.6.1): “Elec

10、tromagnetic compatibility and Radio spectrum Matters (ERM); Peer-to-Peer Digital Private Mobile Radio using FDMA with a channel spacing of 6,25 kHz with e.r.p. of up to 500 mW“. 2 ETSI TS 102 351 (V2.1.1): “Methods for Testing and Specification (MTS); Internet Protocol Testing (IPT); IPv6 Testing: M

11、ethodology and Framework“. 3 ISO/IEC 9646-2: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 2: Abstract Test Suite specification“. 4 ETSI TS 102 587-3: “Electromagnetic compatibility and Radio spectrum Matters (ERM); Peer-to-Peer Digital

12、 Private Mobile Radio; Part 3: Requirements catalogue“. 2.2 Informative references The following referenced documents are not necessary for the application of the present document but they assist the user with regard to a particular subject area. i.1 ETSI ES 202 553: “Methods for testing and Specifi

13、cation (MTS); TPLan: A notation for expressing test Purposes“. ETSI ETSI TS 102 587-2 V1.3.1 (2010-09)63 Abbreviations For the purposes of the present document, the following abbreviations apply: CF (Test) ConFiguration CSF Configured Services and Facilities dPMR digital Private Mobile Radio ISDM In

14、dividual Short Data Message ISF Initial Services and Facilities IUT Implementation Under Test MS Mobile Station OACSU Off Air Call Set-Up PTT Push To Talk RC Requirements Catalogue RQ ReQuirement TP Test Purpose TSS Test Suite Structure 4 Test Suite Structure (TSS) The Test Suite Structure is based

15、on the dPMR Requirements Catalogue (TS 102 587-3 4). It is defined by the groups within the following TPLan specification of test purposes. The numbering is not contiguous so that new TPs can be added at a later date without the need to completely renumber the TSS groups. The test purposes have been

16、 divided into three groups: Group 1: Common requirements. Group 2: CSF requirements. Group 3: ISF requirements. The sub-grouping of these three group follows the structure of the RC. Some of the sub-groups of the RC contained no testable requirement. Headings for those sub-groups are in this test pu

17、rpose document in the node group to give a full view on the relation between RQ and TSS&TP. Group 1 “ISF CSF Common“ Group 1.1 “All Call“ Group 1.2 “Channel Access“ Group 1.3 “Framing“ Group 1.3.1 “End frame“ Group 1.3.2 “Header frames“ Group 1.3.2.1 “Call information field“ Group 1.3.3 “Packet data

18、 frame“ Group 1.3.4 “Superframe“ Group 1.3.4.1 “Type 1 data“ Group 1.3.4.2 “Type 2 data“ Group 1.3.4.3 “Voice“ Group 1.4 “Late Entry“ Group 1.5 “Powersave“ Group 1.6 “Talking Party ID“ Group 2 “CSF“ Group 2.1 “Broadcast Call“ Group 2.2 “Dialling Plan“ Group 2.3 “Individual Short Data Message“ Group

19、2.3.1 “ISDM Free Text Message“ Group 2.3.2 “ISDM Precoded Message“ Group 2.3.3 “ISDM Short File Transfer“ Group 2.3.4 “ISDM Status Message“ Group 2.4 “OACSU“ Group 2.5 “Short Appended Data“ Group 2.6 “Slow User Data“ Group 2.7 “Type 3 data“ Group 3 “ISF“ ETSI ETSI TS 102 587-2 V1.3.1 (2010-09)75 Tes

20、t Purposes (TP) The test purposes have been written in the formal notation TPlan. Configurations that are referenced by test purposes are shown in annex A. TPLan user definitions are listed in annex B. 5.1 ISF CSF Common Group 1 ISF CSF Common 5.1.1 All Call Group 1.1 All Call TP id : TP_PMR_0824_01

21、 summary : ISF All Call RQ ref : RQ_001_0824 TP type : conformance Role : ISF config : CF_dPMR_01 TC ref : TC_PMR_0824_01 with IUT in standby and using a Common_ID between 1 and 254 ensure that when IUT receives a Voice_Transmission containing Call_Data containing Common_ID set to 255 and containing

22、 audible test tone as payload then IUT outputs the audible test tone - xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx TP id : TP_PMR_0858_01 summary : ISF All Call RQ ref : RQ_001_0858 TP type : conformance Role : ISF config : CF_dPMR_01 TC ref : TC_PMR_0858_01 with IUT in standby and

23、 using a Common_ID of 255 ensure that when IUT receives a Voice_Transmission containing Call_Data containing Common_ID set to 255 and containing audible test tone as payload then IUT outputs the audible test tone - xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx TP id : TP_PMR_0858_02

24、summary : ISF All Call RQ ref : RQ_001_0858 TP type : conformance Role : ISF config : CF_dPMR_01 TC ref : TC_PMR_0858_02 with IUT in standby and using a Common_ID of 255 ensure that when IUT receives a Voice_Transmission containing Call_Data containing Common_ID between 1 and 254 and containing audi

25、ble test tone as payload then IUT does not output the audible test tone - xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx ETSI ETSI TS 102 587-2 V1.3.1 (2010-09)8TP id : TP_PMR_1317_01 summary : Standard user interface transmitting All Call RQ ref : RQ_001_1317 TP type : conformance Ro

26、le : CSF config : CF_dPMR_01 TC ref : TC_PMR_1317_01 with IUT configured_for_Standard_User_Interface and in standby ensure that when IUT is requested to send a Voice_Transmission to all_call_address then IUT sends a Voice_Transmission with Header_Frame containing Called_Station_ID set to F8 33 A6h -

27、 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx TP id : TP_PMR_1317_02 summary : Standard user interface All Call within prefix RQ ref : RQ_001_1317 TP type : conformance Role : CSF config : CF_dPMR_01 TC ref : TC_PMR_1317_02 with IUT configured_for_Standard_User_Interface and in stan

28、dby ensure that when IUT is requested to send a Voice_Transmission to all_call_within_a_prefix_address then IUT sends a Voice_Transmission with Header_Frame containing Called_Station_ID set to the Tx_B2_conversion of the all_call_within_a_prefix_address - xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

29、xxxxxxxxxxxxxxxxx TP id : TP_PMR_1317_03 summary : Standard user interface Receiving All Call RQ ref : RQ_001_1317 TP type : conformance Role : CSF config : CF_dPMR_01 TC ref : TC_PMR_1317_03 with IUT configured_for_Standard_User_Interface and in standby ensure that when IUT receives a Voice_Transmi

30、ssion containing Called_Station_ID set to F8 33 A6h and containing audible test tone as payload then IUT outputs the audible test tone - xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx TP id : TP_PMR_1317_04 summary : Standard user interface receiving All Call within a prefix RQ ref :

31、RQ_001_1317 TP type : conformance Role : CSF config : CF_dPMR_01 TC ref : TC_PMR_1317_04 with IUT configured_for_Standard_User_Interface and in standby ensure that when IUT receives a Voice_Transmission containing Called_Station_ID set to the Tx_B2_conversion of an all_call_within_a_prefix_address v

32、alid for the individual_address of the IUT and containing audible test tone as payload then IUT outputs the audible test tone - xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx End group 1.1 ETSI ETSI TS 102 587-2 V1.3.1 (2010-09)95.1.2 channel access Group 1.2 Channel Access TP id : TP

33、_PMR_1004_01 summary : Interference on channel RQ ref : RQ_001_1004 TP type : conformance Role : ISF, CSF config : CF_dPMR_01 TC ref : TC_PMR_1004_01 with IUT in standby and configured_for_polite_to_own_CC ensure that when TESTER sends a continuous Voice_Transmission using an invalid colour_code and

34、 a signal level of -102 dBm and IUT is requested to make a Voice_Transmission then IUT sends the Voice_Transmission - xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx TP id : TP_PMR_1005_01 summary : Tx WAIT Time RQ ref : RQ_001_1005 TP type : conformance Role : ISF, CSF config : CF_dPM

35、R_01 TC ref : TC_PMR_1005_01 with IUT in standby ensure that when TESTER sends a Voice_Transmission with an End_Frame containing Tx_WAIT set to a non_zero value and IUT is requested to send a PTT_Call during the Tx_WAIT time then IUT does not transmit during the Tx_WAIT time - xxxxxxxxxxxxxxxxxxxxxx

36、xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx TP id : TP_PMR_1007_01 summary : Acknowledgement response time RQ ref : RQ_001_1007 TP type : conformance Role : CSF config : CF_dPMR_01 TC ref : TC_PMR_1007_01 with IUT in standby and configured_for_impolite_channel_access ensure that when TESTER sends a cont

37、inuous Voice_Transmission using a signal level of -102 dBm and sends a Voice_Transmission using a signal level of -82 dBm with an End_Frame containing ARQ set to 01b then IUT sends an Ack_Frame - xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx TP id : TP_PMR_1007_02 summary : Acknowled

38、gement response time RQ ref : RQ_001_1007 TP type : conformance Role : CSF config : CF_dPMR_01 TC ref : TC_PMR_1007_02 with IUT in standby and configured_for_polite_to_own_CC and configured_to_use_Tack ensure that when TESTER sends a continuous Voice_Transmission using a signal level of -102 dBm and

39、 sends a Voice_Transmission using a signal level of -82 dBm with an End_Frame containing ARQ set to 01b then IUT sends an Ack_Frame within T_Ack seconds - xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx ETSI ETSI TS 102 587-2 V1.3.1 (2010-09)10TP id : TP_PMR_1007_03 summary : Acknowled

40、gement response time RQ ref : RQ_001_1007 TP type : conformance Role : CSF config : CF_dPMR_01 TC ref : TC_PMR_1007_03 with IUT in standby and configured_for_polite_to_own_CC ensure that when TESTER sends a continuous Voice_Transmission using a signal level of -102 dBm and sends a Voice_Transmission

41、 using a signal level of -82 dBm with an End_Frame containing ARQ set to 01b then IUT sends an Ack_Frame after the TESTER terminates the continuous Voice_Transmission - xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx TP id : TP_PMR_1008_01 summary : Party to call RQ ref : RQ_001_1008 T

42、P type : conformance Role : ISF, CSF config : CF_dPMR_01 TC ref : TC_PMR_1008_01 with IUT in standby ensure that when TESTER sends a continuous Voice_Transmission using a wildcard_group_address or numeric_group_address of the IUT and IUT is requested to send a PTT_Call to the same wildcard_group_add

43、ress or numeric_group_address then IUT sends the PTT_Call - xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx TP id : TP_PMR_1009_01 summary : Polite to CC RQ ref : RQ_001_1009 TP type : conformance Role : ISF config : CF_dPMR_01 TC ref : TC_PMR_1009_01 with IUT in standby and configured

44、_for_polite_to_own_CC ensure that when TESTER sends a continuous Voice_Transmission not addressed to the IUT and IUT is requested to send a Voice_Transmission then IUT does not transmit - xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx TP id : TP_PMR_1010_01 summary : Polite to CC RQ r

45、ef : RQ_001_1010 TP type : conformance Role : ISF config : CF_dPMR_01 TC ref : TC_PMR_1010_01 with IUT in standby and configured_for_impolite_channel_access ensure that when TESTER sends a continuous Voice_Transmission not addressed to the IUT and IUT is requested to send a Voice_Transmission then I

46、UT sends that Voice_Transmission - xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx ETSI ETSI TS 102 587-2 V1.3.1 (2010-09)11TP id : TP_PMR_1011_01 summary : Polite to own group RQ ref : RQ_001_1011 TP type : conformance Role : CSF config : CF_dPMR_01 TC ref : TC_PMR_1011_01 with IUT in

47、 standby and configured_for_polite_to_own_group ensure that when TESTER sends a continuous Voice_Transmission to an individual_address that is also a member of a group configured in the IUT and IUT is requested to send a Voice_Transmission then IUT does not transmit - xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

48、xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx TP id : TP_PMR_1012_01 summary : Multiple acknowledgements RQ ref : RQ_001_1012 TP type : conformance Role : CSF config : CF_dPMR_01 TC ref : TC_PMR_1012_01 with IUT in standby and configured_for_impolite_channel_access and configured_for_multiple_acks ensure that when TESTER sends a continuous Voice_Transmission using a signal level of -102 dBm and sends a Voice_Transmission using a signal level of -82 dBm with an End