ETSI TS 102 744-4-1-2015 Satellite Earth Stations and Systems (SES) Family SL Satellite Radio Interface (Release 1) Part 4 Enhanced Services and Applications Sub-part 1 Multiple Vo.pdf

1、 ETSI TS 102 744-4-1 V1.1.1 (2015-10) Satellite Earth Stations and Systems (SES); Family SL Satellite Radio Interface (Release 1); Part 4: Enhanced Services and Applications; Sub-part 1: Multiple Voice Services TECHNICAL SPECIFICATION ETSI ETSI TS 102 744-4-1 V1.1.1 (2015-10) 2 Reference DTS/SES-002

2、99-4-1 Keywords 3GPP, GPRS, GSM, GSO, interface, MSS, radio, satellite, TDM, TDMA, UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture d

3、e Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modifi

4、ed without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Use

5、rs of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comm

6、ent to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. T

7、he content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2015. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are

8、Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 102 744-4-1 V1.1.1 (

9、2015-10) 3 Contents Intellectual Property Rights 5g3Foreword . 5g3Modal verbs terminology 5g3Introduction 5g31 Scope 6g32 References 6g32.1 Normative references . 6g32.2 Informative references 6g33 Symbols and abbreviations . 6g33.1 Symbols 6g33.2 Abbreviations . 6g34 General . 7g34.1 Overview 7g34.

10、2 System architecture 7g34.3 Access to the VoIP domain 8g35 Mobile PBX Requirements 9g35.1 General Requirements 9g35.1.1 Number of Concurrent Calls . 9g35.1.2 Support for Direct Inward Dialling . 9g35.1.3 Support for Short Code Dialling . 9g35.1.4 Support for Call Barring . 10g35.1.5 Configuration R

11、equirements . 10g35.2 Functional Requirements 10g35.2.1 Domain Selection Requirements . 10g35.2.2 Circuit Switched Call Handling Requirements . 10g35.2.2.1 CS Domain Supplementary Services Requirements . 10g35.2.2.2 Support for Direct Inward Dialling in the CS Domain 10g35.2.2.3 Call Waiting in the

12、CS Domain. 10g35.2.2.3.0 General 10g35.2.2.3.1 CS Voice Calls 11g35.2.3 Domain Independent Supplementary Services Settings 11g35.3 Protocol Requirements . 11g35.3.0 General 11g35.3.1 Session Management Requirements . 11g35.3.1.0 General 11g35.3.1.1 Primary PDP Context Activation 11g35.3.1.2 Secondar

13、y PDP Context Definition . 12g35.3.1.3 Secondary PDP Context Activation, Modification and Deactivation . 12g35.3.2 SIP Protocol Requirements . 13g35.3.2.0 General 13g35.3.2.1 SIP Registration 13g35.3.2.2 SIP Options . 13g35.3.2.3 SIP Call Setup (originating from PBX) . 13g35.3.2.4 SIP Call Setup (te

14、rminating on PBX) 13g35.3.2.5 SIP Call Maintenance 14g35.3.3 Media Handling Requirements . 14g35.3.3.1 Codec 14g35.3.3.2 Codec Frame Packetization . 14g35.3.3.3 DTMF Handling 14g35.3.4 SIP Domain Supplementary Services Requirements 14g35.3.4.1 Calling Number Presentation on Inbound Calls 14g35.3.4.2

15、 Calling Number Presentation on Outbound Calls . 15g35.3.4.3 Supplementary Services Settings related to Calling Number Delivery . 15g35.3.4.4 Call Waiting and Call Hold in the SIP Domain 15g3ETSI ETSI TS 102 744-4-1 V1.1.1 (2015-10) 4 Annex A (normative): VoIP Domain Call Service Codes . 16g3History

16、 17g3ETSI ETSI TS 102 744-4-1 V1.1.1 (2015-10) 5 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be

17、 found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/ipr.etsi.org). Pursuant to the ETSI IPR

18、Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This

19、Technical Specification (TS) has been produced by ETSI Technical Committee Satellite Earth Stations and Systems (SES). The present document is part 4, sub-part 1 of a multi-part deliverable. Full details of the entire series can be found in ETSI TS 102 744-1-1 4. Modal verbs terminology In the prese

20、nt document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables

21、except when used in direct citation. Introduction This multi-part deliverable (Release 1) defines a satellite radio interface that provides UMTS services to users of mobile terminals via geostationary (GEO) satellites in the frequency range 1 518,000 MHz to 1 559,000 MHz (downlink) and 1 626,500 MHz

22、 to 1 660,500 MHz and 1 668,000 MHz to 1 675,000 MHz (uplink). ETSI ETSI TS 102 744-4-1 V1.1.1 (2015-10) 6 1 Scope The present document specifies the mandatory requirements for User Equipment (UE) implementing multiple voice communications via the Voice-over-IP (VoIP) service for the Family SL satel

23、lite radio interface. 2 References 2.1 Normative references References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the refe

24、rence document (including any amendments) applies. Referenced documents which are not found to be publicly available in the expected location might be found at http:/docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guara

25、ntee their long term validity. The following referenced documents are necessary for the application of the present document. 1 IETF RFC 3261 (2002): “SIP: Session Initiation Protocol“, J. Rosenberg. 2 IETF RFC 4733 (2006): “RTP Payload for DTMF Digits, Telephony Tones and Telephony Signals“, H. Schu

26、lzrinne. 3 ETSI TS 102 744-1-4: “Satellite Earth Stations and Systems (SES); Family SL Satellite Radio Interface (Release 1); Part 1: General Specifications; Sub-part 4: Applicable External Specifications, Symbols and Abbreviations“. 4 ETSI TS 102 744-1-1: “Satellite Earth Stations and Systems (SES)

27、; Family SL Satellite Radio Interface (Release 1); Part 1: General Specifications; Sub-part 1: Services and Architectures“. 5 ETSI TS 124 008: “Digital cellular telecommunications system (Phase 2+); Universal Mobile Telecommunications System (UMTS); LTE; Mobile radio interface Layer 3 specification;

28、 Core network protocols; Stage 3 (3GPP TS 24.008)“. 2.2 Informative references References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest

29、version of the reference document (including any amendments) applies. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents are not necessary for the application of the present docu

30、ment but they assist the user with regard to a particular subject area. Not applicable. 3 Symbols and abbreviations 3.1 Symbols For the purposes of the present document, the symbols given in ETSI TS 102 744-1-4 3, clause 3 apply. 3.2 Abbreviations For the purposes of the present document, the abbrev

31、iations given in ETSI TS 102 744-1-4 3, clause 3 apply. ETSI ETSI TS 102 744-4-1 V1.1.1 (2015-10) 7 4 General 4.1 Overview The Circuit Switched (CS) domain is designed to carry only one active voice call per subscriber identity at any time. For User Equipment (UE) that is shared among users, e.g. on

32、 ships or aircraft, it is desirable to overcome this limitation and to offer the ability to handle more than one concurrent voice call. Additional voice calls can be provided by a Voice-over-IP (VoIP) service domain using the Packet Switched (PS) domain as its transport. The general principle of ope

33、ration assumes that the first preference is to use the CS domain to set up a call. Only if the CS domain is unavailable (i.e. one voice call is already in progress between the user and another party), will any additional calls be set up using the VoIP domain. The present document specifies the manda

34、tory requirements for equipment implementing a User Agent in the VoIP service domain. This User Agent is essentially providing a Private Branch Exchange (PBX) in the mobile domain, as shown in Figure 4.1, and is therefore referred to as “Mobile PBX“ throughout the present document. Figure 4.1: Equip

35、ment Configuration for support of Multiple Voice service A Mobile PBX can be implemented either as an integral part of a UE or as external hardware that can be connected to an existing UE. In general, the requirements specified in the present document apply to both implementations unless indicated o

36、therwise. 4.2 System architecture The solution described in the present document is based upon the integration of a VoIP domain containing infrastructure operating in tandem with the Circuit Switched domain and operating via the Packet Switched Domain. A simplified representation of the overall syst

37、em architecture is represented in Figure 4.2, where the VoIP domain is functionally provided by a VoIP server. ETSI ETSI TS 102 744-4-1 V1.1.1 (2015-10) 8 Figure 4.2: Overall System Architecture for support of Multiple Voice service A new VoIP Domain, provided via a VoIP server, is introduced into t

38、he Family SL ground segment, and provides an interface between the existing Circuit Switched domain and the Packet Switched domain for transport of multiple voice calls when the single CS voice circuit towards a mobile terminal is busy. The interface with the PSTN is handled by the existing Circuit

39、Switched domain for both mobile terminated and mobile originated calls. The existing voice mail system will be used to support per-MSISDN voice mail. Multiple MSISDN numbers are allocated to the subscriber. These numbers may be allocated to individual handsets by configuration of the mobile terminal

40、 or the external VoIP PBX. Alternatively functionality may be provided in the mobile terminal or VoIP PBX to determine which handset to alert upon Mobile Terminated call initiation utilizing the primary MSISDN. 4.3 Access to the VoIP domain The Mobile Terminal registers with the Radio Access Network

41、 and then initiates an Attach procedure towards both the CS and PS domains. During these Attach procedures the MT is authenticated, and Security Mode procedures are initiated to secure the signalling and user-plane between the Radio Access Network and the Mobile Terminal. ETSI ETSI TS 102 744-4-1 V1

42、.1.1 (2015-10) 9 Figure 4.3: Simplified Presentation of Initial Access Procedure Conditional on successful CS and PS attach procedures , the mobile terminal initiates a background Primary PDP context towards the Inmarsat VoIP APN, which is authorized by the HLR if the subscriber is granted access to

43、 Multiple Voice services. Conditional on the Mobile Terminal subscriber being authorized to access VoIP domain infrastructure, an IP address is allocated to the mobile terminal and the PDP context activated. The Mobile Terminal then performs a DNS lookup to obtain the IP address of the SIP server wi

44、thin the VoIP domain (the fully qualified domain name of the SIP server will be configured in the Mobile Terminal). The Mobile Terminal then initiates a SIP registration procedure towards the SIP server. 5 Mobile PBX Requirements 5.1 General Requirements 5.1.1 Number of Concurrent Calls The Mobile P

45、BX shall support a minimum of four concurrent voice calls (one call placed via the CS domain and an additional three placed through the PS domain). It should support up to nine concurrent voice calls. NOTE: The maximum number of concurrent voice calls supported is determined by the subscribers servi

46、ce package and is enforced by the network. 5.1.2 Support for Direct Inward Dialling Additional MSISDNs (AMISDNs) may be allocated to a UE network subscription to provide support for Direct Inward Dialling (DID) from another network to individual telephone handsets connected to the Mobile PBX. These

47、DID numbers shall be provided to the subscriber when they request a multiple voice service package from the satellite network service provider. The Mobile PBX may optionally support telephone handsets that are not associated with a DID number. Such handsets would typically be used for outbound calls

48、 only. 5.1.3 Support for Short Code Dialling The Mobile PBX shall support Short Code Dialling in both service domains. ETSI ETSI TS 102 744-4-1 V1.1.1 (2015-10) 10 5.1.4 Support for Call Barring The Mobile PBX should provide means to implement local barring of outgoing calls (whitelist and/or blackl

49、ist) to be applied either to individual handsets or to a group of handsets. 5.1.5 Configuration Requirements The Mobile PBX shall provide a suitable, user friendly interface for its configuration. As a minimum, the interface shall allow the user to change the following parameters through a suitable user interface: Access Point Name (APN) string apn_name SIP Domain Name string sip_domain_name It is recommended that these parameters are pre-configured by the manufacturer with default strings as advised by the satellite network service provider prior to