ETSI TS 102 790-1-2014 Core Network and Interoperability Testing (INT) IMS specific use of Session Initiation Protocol (SIP) and Session Description Protocol (SDP) Conformance Test_1.pdf

1、 ETSI TS 102 790-1 V3.1.1 (2014-07) Core Network and Interoperability Testing (INT); IMS specific use of Session Initiation Protocol (SIP) and Session Description Protocol (SDP); Conformance Testing; (3GPP Release 10); Part 1: Protocol Implementation Conformance Statement (PICS) TECHNICAL SPECIFICAT

2、ION ETSI ETSI TS 102 790-1 V3.1.1 (2014-07)2Reference RTS/INT-00093-1 Keywords IMS, network, PICS, SIP, testing ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregi

3、stre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be

4、 modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretari

5、at. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send yo

6、ur comment to one of the following services: http:/portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. Th

7、e content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2014. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are T

8、rade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 102 790-1 V3.1.1 (201

9、4-07)3Contents Intellectual Property Rights 4g3Foreword . 4g3Modal verbs terminology 4g3Introduction 4g31 Scope 5g32 References 5g32.1 Normative references . 5g32.2 Informative references 5g33 Definitions and abbreviations . 6g33.1 Definitions 6g33.2 Abbreviations . 6g34 Conformance 6g3Annex A (norm

10、ative): PICS proforma . 7g3A.1 Guidance for completing the ICS proforma . 7g3A.1.1 Purposes and structure 7g3A.1.2 Abbreviations and conventions 7g3A.1.3 Instructions for completing the PICS proforma 8g3A.2 Identification of the Network Equipment . 9g3A.2.1 Date of the statement 9g3A.2.2 Network Equ

11、ipment Under Test identification. 9g3A.2.3 Product supplier 9g3A.2.4 Client 10g3A.2.5 PICS contact person . 10g3A.3 Identification of the protocol 11g3A.4 Global statement of conformance . 11g3A.5 PICS proforma tables . 11g3A.5.1 Roles . 11g3A.5.2 P-CSCF Role 11g3A.5.2.1 P-CSCF Capabilities . 12g3A.

12、5.2.2 P-CSCF header handling 20g3A.5.3 I-CSCF Role . 20g3A.5.3.1 I-CSCF Capabilities 20g3A.5.4 S-CSCF Role 22g3A.5.4.1 S-CSCF Capabilities . 22g3A.5.4.2 S-CSCF header handling 27g3A.5.5 IBCF Role 28g3A.5.5.1 IBCF Capabilities . 28g3A.5.6 E-CSCF Role 30g3A.5.6.1 E-CSCF Capabilities . 30g3History 31g3

13、ETSI ETSI TS 102 790-1 V3.1.1 (2014-07)4Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in

14、 ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/ipr.etsi.org). Pursuant to the ETSI IPR Policy, n

15、o investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical

16、 Specification (TS) has been produced by ETSI Technical Committee Core Network and Interoperability Testing (INT). The present document is part 1 of a multi-part deliverable covering the IMS specific use of Session Initiation Protocol (SIP) and Session Description Protocol (SDP); Conformance Testing

17、, as identified below: Part 1: “Protocol Implementation Conformance Statement (PICS)“; Part 2: “Test Suite Structure (TSS) and Test Purposes (TP)“; Part 3: “Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification“. Modal verbs termin

18、ology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “may not“, “need“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“

19、are NOT allowed in ETSI deliverables except when used in direct citation. Introduction To evaluate protocol conformance of a particular implementation, it is necessary to have a statement of which capabilities and options have been implemented for a telecommunication specification. Such a statement

20、is called a Protocol Implementation Conformance Statement (PICS). ETSI ETSI TS 102 790-1 V3.1.1 (2014-07)51 Scope The present document provides the Protocol Implementation Conformance Statement (PICS) proforma for the IP Multimedia core network Subsystem (IMS) equipment supporting the Internet Proto

21、col (IP) multimedia call control protocol based on Session Initiation Protocol (SIP) and Session Description Protocol (SDP) as specified in TS 124 229 1 in compliance with the relevant requirements and in accordance with the relevant guidance given in ISO/IEC 9646-7 4 and ETS 300 406 5. The supplier

22、 of a protocol implementation which is claimed to conform to TS 124 229 1 is required to complete a copy of the PICS proforma provided in annex A of the present document and is required to provide the information necessary to identify both the supplier and the implementation. 2 References References

23、 are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the reference document (including any amendments) applies. Referenced document

24、s which are not found to be publicly available in the expected location might be found at http:/docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. 2.1 Normative references The following

25、referenced documents are necessary for the application of the present document. 1 ETSI TS 124 229 (V10.14.0): “Digital cellular telecommunications system (Phase 2+); Universal Mobile Telecommunications System (UMTS); LTE; IP multimedia call control protocol based on Session Initiation Protocol (SIP)

26、 and Session Description Protocol (SDP); Stage 3 (3GPP TS 24.229 version 10.14.0 Release 10)“. 2 IETF RFC 3261 (2002): “SIP: Session Initiation Protocol“. 3 Void. 4 ISO/IEC 9646-7: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 7: Implem

27、entation Conformance Statements“. 5 ETSI ETS 300 406: “Methods for testing and Specification (MTS); Protocol and profile conformance testing specifications; Standardization methodology“. 6 IETF RFC 4412: “Communications Resource Priority for the Session Initiation Protocol (SIP)“. 7 IETF RFC 5009: “

28、Private Header (P-Header) Extension to the Session Initiation Protocol (SIP) for Authorization of Early Media“. 8 ETSI TS 133 203: “Digital cellular telecommunications system (Phase 2+); Universal Mobile Telecommunications System (UMTS); LTE; 3G security; Access security for IP-based services (3GPP

29、TS 33.203)“. 2.2 Informative references The following referenced documents are not necessary for the application of the present document but they assist the user with regard to a particular subject area. i.1 ISO/IEC 9646-1: “ Information technology - Open Systems Interconnection - Conformance testin

30、g methodology and framework - Part 1: General concepts“. ETSI ETSI TS 102 790-1 V3.1.1 (2014-07)63 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in TS 124 229 1 and the following apply: PICS proforma: document, in the form of

31、a questionnaire, designed by the protocol specifier or conformance test suite specifier, which, when completed for an OSI implementation or system, becomes the PICS NOTE: See ISO/IEC 9646-1 i.1. Protocol Implementation Conformance Statement (PICS): statement made by the supplier of an Open Systems I

32、nterconnection (OSI) implementation or system, stating which capabilities have been implemented for a given OSI protocol NOTE: See ISO/IEC 9646-1 i.1. static conformance review: review of the extent to which the static conformance requirements are met by the IUT, accomplished by comparing the PICS w

33、ith the static conformance requirements expressed in the relevant standard(s) NOTE: See ISO/IEC 9646-1 i.1. 3.2 Abbreviations For the purposes of the present document, the abbreviations given in TS 124 229 1 apply. 4 Conformance A PICS proforma which conforms to this PICS proforma specification shal

34、l be technically equivalent to annex A, and shall preserve the numbering and ordering of the items in annex A. A PICS which conforms to this PICS proforma specification shall: a) describe an implementation which claims to conform to TS 124 229 1; b) be a conforming ICS proforma which has been comple

35、ted in accordance with the instructions for completion given in clause A.1; c) include the information necessary to uniquely identify both the supplier and the implementation. ETSI ETSI TS 102 790-1 V3.1.1 (2014-07)7Annex A (normative): PICS proforma Notwithstanding the provisions of the copyright c

36、lause related to the text of the present document, ETSI grants that users of the present document may freely reproduce the PICS proforma in this annex so that it can be used for its intended purposes and may further publish the completed PICS. A.1 Guidance for completing the ICS proforma A.1.1 Purpo

37、ses and structure The purpose of this PICS proforma is to provide a mechanism whereby a supplier of an implementation of the requirements defined in relevant specifications may provide information about the implementation in a standardized manner. The PICS proforma is subdivided into clauses for the

38、 following categories of information: - instructions for completing the PICS proforma; - identification of the implementation; - identification of the protocol; - PICS proforma tables (for example: Major capabilities, etc.). A.1.2 Abbreviations and conventions This annex does not reflect dynamic con

39、formance requirements but static ones. In particular, a condition for support of a PDU parameter does not reflect requirements about the syntax of the PDU (i.e. the presence of a parameter) but the capability of the implementation to support the parameter. In the sending direction, the support of a

40、parameter means that the implementation is able to send this parameter (but it does not mean that the implementation always sends it). In the receiving direction, it means that the implementation supports the whole semantic of the parameter that is described in the main part of the present document.

41、 As a consequence, PDU parameter tables in this annex are not the same as the tables describing the syntax of a PDU in the reference specification. The PICS proforma contained in this annex is comprised of information in tabular form in accordance with the guidelines presented in ISO/IEC 9646-7 4. I

42、tem column The item column contains a number which identifies the item in the table. Item description column The item description column describes in free text each respective item (e.g. parameters, timers, etc.). It implicitly means “is supported by the implementation?“. Reference column The refere

43、nce column gives reference to the relevant sections in core specifications. ETSI ETSI TS 102 790-1 V3.1.1 (2014-07)8Status column The various status used in this annex are in accordance with the rules in table A.1. Table A.1: Key to status codes Status code Status name Meaning m mandatory The capabi

44、lity shall be supported. It is a static view of the fact that the conformance requirements related to the capability in the reference specification are mandatory requirements. This does not mean that a given behaviour shall always be observed (this would be a dynamic view), but that it shall be obse

45、rved when the implementation is placed in conditions where the conformance requirements from the reference specification compel it to do so. For instance, if the support for a parameter in a sent PDU is mandatory, it does not mean that it shall always be present, but that it shall be present accordi

46、ng to the description of the behaviour in the reference specification (dynamic conformance requirement). o optional The capability may or may not be supported. It is an implementation choice. n/a not applicable It is impossible to use the capability. No answer in the support column is required. c. c

47、onditional The requirement on the capability (“m“, “o“ and “n/a“) depends on the support of other optional or conditional items. is the identifier of the conditional expression. o. qualified optional For mutually exclusive or selectable options from a set. is the identifier of the group of options,

48、and the logic of selection of the options. Mnemonic column The Mnemonic column contains mnemonic identifiers for each item. Support column The support column shall be filled in by the supplier of the implementation. The following common notations, defined in ISO/IEC 9646-7 4, are used for the suppor

49、t column: Y or y supported by the implementation N or n not supported by the implementation N/A, n/a or- no answer required (allowed only if the status is N/A, directly or after evaluation of a conditional status) References to items For each possible item answer (answer in the support column) within the PICS proforma there exists a unique reference, used, for example, in the conditional expressions. It is defined as the table identifier, followed by a solidus character “/“, followed by the item number in the table. EXAMPLE: A.5/4 i