ETSI TS 102 797-1-2014 Intelligent Transport Systems (ITS) Communications Access for Land Mobiles (CALM) Test specifications for ITS station management (ISO 24102) Part 1 Protocol _1.pdf

1、 ETSI TS 102 797-1 V1.2.1 (2014-06) Intelligent Transport Systems (ITS); Communications Access for Land Mobiles (CALM); Test specifications for ITS station management (ISO 24102); Part 1: Protocol Implementation Conformance Statement (PICS) specification Technical Specification ETSI ETSI TS 102 797-

2、1 V1.2.1 (2014-06)2Reference RTS/ITS-00266 Keywords CALM, ITS, PICS, testing ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (0

3、6) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written

4、 authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document s

5、hould be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following

6、services: http:/portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall

7、not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2014. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for t

8、he benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 102 797-1 V1.2.1 (2014-06)3Contents Intellectual Propert

9、y Rights 5g3Foreword . 5g3Modal verbs terminology 5g3Introduction 5g31 Scope 6g32 References 6g32.1 Normative references . 6g32.2 Informative references 6g33 Definitions and abbreviations . 6g33.1 Definitions 6g33.2 Abbreviations . 7g34 Conformance to this PICS proforma specification . 7g3Annex A (n

10、ormative): PICS proforma for the “ITS station-internal management communications protocol“ 8g3A.1 Guidance for completing the PICS proforma . 8g3A.1.1 Purposes and structure 8g3A.1.2 Abbreviations and conventions 8g3A.1.3 Instructions for completing the PICS proforma 10g3A.2 Identification of the im

11、plementation 10g3A.2.1 Date of the statement 10g3A.2.2 Implementation Under Test (IUT) identification . 10g3A.2.3 System Under Test (SUT) identification 10g3A.2.4 Product supplier 11g3A.2.5 Client (if different from product supplier) 11g3A.2.6 PICS contact person . 12g3A.3 Identification of the prot

12、ocol 12g3A.4 Global statement of conformance . 12g3A.5 Basic functionality 13g3A.6 Protocol elements . 13g3A.6.1 Service access points 13g3A.6.2 PDUs 13g3A.6.3 PDU elements . 13g3A.7 Protocol procedures 14g3A.8 Values . 15g3A.9 Security. 15g3Annex B (normative): PICS proforma for the “Fast service a

13、dvertisement protocol“ . 16g3B.1 Guidance for completing the PICS proforma . 16g3B.1.1 Purposes and structure 16g3B.1.2 Abbreviations and conventions 16g3B.1.3 Instructions for completing the PICS proforma 18g3B.2 Identification of the implementation 18g3B.2.1 Date of the statement 18g3B.2.2 Impleme

14、ntation Under Test (IUT) identification . 18g3B.2.3 System Under Test (SUT) identification 18g3ETSI ETSI TS 102 797-1 V1.2.1 (2014-06)4B.2.4 Product supplier 19g3B.2.5 Client (if different from product supplier) 19g3B.2.6 PICS contact person . 20g3B.3 Identification of the protocol 20g3B.4 Global st

15、atement of conformance . 20g3B.5 Basic functionality 21g3B.6 Protocol elements . 22g3B.6.1 Processing entities 22g3B.6.2 Service access points 22g3B.6.2 PDUs 22g3B.6.3 PDU elements . 22g3B.6.3.1 Service initialization phase . 22g3B.7 Protocol procedures 23g3B.7.1 Service provider . 23g3B.7.2 Service

16、 user 24g3B.7.3 Supported protocols 24g3History 26g3ETSI ETSI TS 102 797-1 V1.2.1 (2014-06)5Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available f

17、or ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (htt

18、p:/ipr.etsi.org). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essent

19、ial to the present document. Foreword This Technical Specification (TS) has been produced by ETSI Technical Committee Intelligent Transport Systems (ITS). The present document is part 1 of a multi-part deliverable covering Communications Access for Land Mobiles (CALM); Test specifications for ITS st

20、ation management (ISO 24102), as identified below: Part 1: “Protocol Implementation Conformance Statement (PICS) specification“; Part 2: “Test Suite Structure and Test Purposes (TSS Part 3: “Abstract Test Suite (ATS) and partial PIXIT proforma“. Modal verbs terminology In the present document “shall

21、“, “shall not“, “should“, “should not“, “may“, “may not“, “need“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables

22、 except when used in direct citation. Introduction To evaluate conformance of a particular implementation, it is necessary to have a statement of which capabilities and options have been implemented for a telecommunication specification. Such a statement is called a “Protocol Implementation Conforma

23、nce Statement“ (PICS). ETSI ETSI TS 102 797-1 V1.2.1 (2014-06)61 Scope The present document provides the “Protocol Implementation Conformance Statement“ (PICS) proforma for the ISO protocols specified in ISO 24102-4 1 and ISO 24102-5 2 in compliance with the relevant requirements, and in accordance

24、with the relevant guidance given in ISO/IEC 9646-7 4, ETS 300 406 3 and EG 202 798 i.1. 2 References References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific r

25、eferences, the latest version of the reference document (including any amendments) applies. Referenced documents which are not found to be publicly available in the expected location might be found at http:/docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were valid at t

26、he time of publication, ETSI cannot guarantee their long term validity. 2.1 Normative references The following referenced documents are necessary for the application of the present document. 1 ISO 24102-4:2013: “Intelligent transport systems - Communications access for land mobiles (CALM) - ITS stat

27、ion management - Part 4: Station-internal management communications“. 2 ISO 24102-5:2013: “Intelligent transport systems - Communications access for land mobiles (CALM) - ITS station management - Part 5: Fast service advertisement protocol (FSAP)“. 3 ETSI ETS 300 406 (1995): “Methods for testing and

28、 Specification (MTS); Protocol and profile conformance testing specifications; Standardization methodology“. 4 ISO/IEC 9646-7: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 7: Implementation Conformance Statements“. 2.2 Informative refe

29、rences The following referenced documents are not necessary for the application of the present document but they assist the user with regard to a particular subject area. i.1 ETSI EG 202 798: “Intelligent Transport Systems (ITS); Testing; Framework for conformance and interoperability testing“. 3 De

30、finitions and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in ISO 24102-4 1, ISO 24102-5 2, ETS 300 406 3, ISO/IEC 9646-7 4, EG 202 798 i.1 and the following apply: PICS proforma: document, in the form of a questionnaire, which when complete

31、d for an implementation or system becomes a PICS ETSI ETSI TS 102 797-1 V1.2.1 (2014-06)7Protocol Implementation Conformance Statement (PICS): statement made by the supplier of an implementation or system claimed to conform to a given specification, stating which capabilities have been implemented N

32、OTE: The PICS can take several forms: protocol PICS, profile PICS, profile specific PICS, information object PICS, etc. 3.2 Abbreviations For the purposes of the present document, the abbreviations given in ISO 24102-4 1, ISO 24102-5 2, ETS 300 406 3, ISO/IEC 9646-7 4, EG 202 798 i.1 and the followi

33、ng apply: FSAP Fast Service Advertisement Protocol IUT Implementation Under Test PICS Protocol Implementation Conformance Statement SUT System Under Test 4 Conformance to this PICS proforma specification If it claims to conform to the present document, the actual PICS proformas to be filled in by a

34、supplier shall be technically equivalent to the text of the PICS proformas given in annexes A or B, and shall preserve the numbering/naming and ordering of the proforma items. A PICS which conforms to the set of “ITS station-internal management communication protocol (IICP)“ 1 shall be a conforming

35、PICS proforma completed in accordance with the guidance for completion given in clause A.1. A PICS which conforms to “Fast Service Advertisement Protocol“ (FSAP) 2 shall be a conforming PICS proforma completed in accordance with the guidance for completion given in clause B.1. NOTE: “ITS station-int

36、ernal management communications“ is an integral functionality of an implementation option of FSAP. ETSI ETSI TS 102 797-1 V1.2.1 (2014-06)8Annex A (normative): PICS proforma for the “ITS station-internal management communications protocol“ Notwithstanding the provisions of the copyright clause relat

37、ed to the text of the present document, ETSI grants that users of the present document may freely reproduce the PICS proforma in this annex so that it can be used for its intended purposes and may further publish the completed PICS. A.1 Guidance for completing the PICS proforma A.1.1 Purposes and st

38、ructure The purpose of this PICS proforma is to provide a mechanism whereby a supplier of an implementation of the requirements defined in ISO 24102-4 1 may provide information about the implementation in a standardized manner. The PICS proforma is subdivided into clauses for the following categorie

39、s of information: guidance for completing the PICS proforma; identification of the implementation; identification of the protocol; global statement of conformance; PICS proforma tables. A.1.2 Abbreviations and conventions The PICS proforma contained in this annex is comprised of information in tabul

40、ar form in accordance with the guidelines presented in ISO/IEC 9646-7 4. Item column The item column contains a number which identifies the item in the table. Item description column The item description column describes in free text each respective item (e.g. parameters, timers, etc.). It implicitl

41、y means “is supported by the implementation?“. ETSI ETSI TS 102 797-1 V1.2.1 (2014-06)9Status column The following notations, defined in ISO/IEC 9646-7 4, are used for the status column: m mandatory - the capability is required to be supported. o optional - the capability may be supported or not. n/

42、a not applicable - in the given context, it is impossible to use the capability. x prohibited (excluded) - there is a requirement not to use this capability in the given context. o.i qualified optional - for mutually exclusive or selectable options from a set. “i“ is an integer which identifies a un

43、ique group of related optional items and the logic of their selection which is defined immediately following the table. ci conditional - the requirement on the capability (“m“, “o“, “x“ or “n/a“) depends on the support of other optional or conditional items. “i“ is an integer identifying a unique co

44、nditional status expression which is defined immediately following the table. Reference column The reference column makes reference to ISO 24102-4 1, except where explicitly stated otherwise. Support column The support column shall be filled in by the supplier of the implementation. The following co

45、mmon notations, defined in ISO/IEC 9646-7 4, are used for the support column: Y or y supported by the implementation. N or n not supported by the implementation. N/A, n/a or - no answer required (allowed only if the status is n/a, directly or after evaluation of a conditional status). NOTE: As state

46、d in ISO/IEC 9646-7 4, support for a received PDU requires the ability to parse all valid parameters of that PDU. Supporting a PDU while having no ability to parse a valid parameter is non-conformant. Support for a parameter on a PDU means that the semantics of that parameter are supported. Values a

47、llowed column The values allowed column contains the type, the list, the range or the length of values allowed. The following notations are used: range of values: example: 5 20 list of values: , , ., example: 2, 4, 6, 8, 9 example: 1101B, 1011B, 1111B example: 0AH, 34H, 2FH list of named values: (),

48、 (), ., () example: reject(1), accept(2) length: size ( ) example: size (1 8) Values supported column The values supported column shall be filled in by the supplier of the implementation. In this column, the values or the ranges of values supported by the implementation shall be indicated. ETSI ETSI

49、 TS 102 797-1 V1.2.1 (2014-06)10References to items For each possible item answer (answer in the support column) within the PICS proforma a unique reference exists, used, for example, in the conditional expressions. It is defined as the table identifier, followed by a solidus character “/“, followed by the item number in the table. If there is more than one support column in a table, the columns are discriminated by letters (a, b, etc.), respectively. EXAMPLE 1: B.5/4 is the refere