ETSI TS 102 797-3-2014 Intelligent Transport Systems (ITS) Communications Access for Land Mobiles (CALM) Test specifications for ITS station management (ISO 24102) Part 3 Abstract .pdf

1、 ETSI TS 102 797-3 V1.2.1 (2014-06) Intelligent Transport Systems (ITS); Communications Access for Land Mobiles (CALM); Test specifications for ITS station management (ISO 24102); Part 3: Abstract Test Suite (ATS) and partial PIXIT proforma floppy3Technical Specification ETSI ETSI TS 102 797-3 V1.2.

2、1 (2014-06)2Reference RTS/ITS-00268 Keywords ATS, CALM, ITS, management, testing, TTCN ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de

3、 Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the pri

4、or written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present

5、document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the

6、following services: http:/portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF vers

7、ion shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2014. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI regist

8、ered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 102 797-3 V1.2.1 (2014-06)3Contents Intellectu

9、al Property Rights 5g3Foreword . 5g3Modal verbs terminology 5g31 Scope 6g32 References 6g32.1 Normative references . 6g32.2 Informative references 7g33 Definitions and abbreviations . 7g33.1 Definitions 7g33.2 Abbreviations . 7g34 Abstract protocol tester 7g35 Abstract test method for FSAP . 8g35.1

10、Abstract protocol tester 8g35.2 Test configurations . 9g35.2.1 Roles of an ITS-SCU 9g35.2.2 Test configuration CF01: No ITS station-internal network 9g35.2.3 Test configuration CF02: ITS station-internal network 9g35.3 Test architecture . 10g35.4 Ports and abstract service primitives 11g35.4.1 Overv

11、iew 11g35.4.2 ASPs of the fsapPort . 11g35.4.3 ASPs of the utPort 12g36 Abstract Test Method for IICP . 12g36.1 Abstract protocol tester 12g36.2 Test configurations . 12g36.3 Test architecture . 13g36.4 Ports and abstract service primitives 14g36.4.1 Overview 14g36.4.2 ASPs of the iicpPort 14g36.4.3

12、 ASPs of the utPort 15g37 ATS conventions 15g37.1 Testing conventions 15g37.1.1 Testing states 15g37.1.1.1 Initial state . 15g37.1.1.2 Final state 15g37.1.2 Message types - ASN.1 definitions . 15g37.2 Naming conventions . 15g37.2.1 General guidelines 15g37.2.2 Usage of Log statements . 15g3Annex A (

13、normative): Partial PIXIT proforma for FSAP . 17g3A.1 Identification summary. 17g3A.2 ATS summary 17g3A.3 Test laboratory 17g3A.4 Client identification 18g3A.5 SUT 18g3A.6 Protocol layer information 18g3A.6.1 Protocol identification 18g3ETSI ETSI TS 102 797-3 V1.2.1 (2014-06)4A.6.2 IUT information .

14、 19g3Annex B (normative): Partial PIXIT proforma for IICP . 23g3B.1 Identification summary. 23g3B.2 ATS summary 23g3B.3 Test laboratory 23g3B.4 Client identification 24g3B.5 SUT 24g3B.6 Protocol layer information 24g3B.6.1 Protocol identification 24g3B.6.2 IUT information . 25g3Annex C (normative):

15、TTCN-3 library modules . 28g3C.1 Electronic annex, zip file with TTCN-3 code 28g3C.2 Extensions of Architecture of conformance validation framework 28g3C.2.1 Test Adapter . 28g3C.2.2 Lower Tester 29g3C.2.3 Dispatcher. 30g3C.2.4 Codecs source code 30g3C.2.5 Test Adapter source code . 30g3C.2.6 Dispat

16、cher source code . 30g3C.3 Upper Tester message format . 31g3C.3.1 FNTP Upper Tester Primitives . 31g3C.3.1.1 FntpInitialize . 31g3C.3.1.2 FntpPortCreationRequest 31g3C.3.1.3 FntpPortCreationConfirm . 31g3C.3.1.4 FntpForwardTableNotification . 32g3C.3.2 FSAP Upper Tester Primitives - FsapInitialize

17、32g3C.3.3 IICP Upper Tester Primitives - IicpInitialize 32g3History 33g3ETSI ETSI TS 102 797-3 V1.2.1 (2014-06)5Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is

18、publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the

19、ETSI Web server (http:/ipr.etsi.org). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, o

20、r may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI Technical Committee Intelligent Transport Systems (ITS). The present document is part 3 of a multi-part deliverable covering Communications Access for Land Mobiles (CALM); Test speci

21、fications for ITS station management (ISO 24102), as identified below: Part 1: “Protocol Implementation Conformance Statement (PICS) specification“; Part 2: “Test Suite Structure and Test Purposes (TSS Part 3: “Abstract Test Suite (ATS) and partial PIXIT proforma“. Modal verbs terminology In the pre

22、sent document “shall“, “shall not“, “should“, “should not“, “may“, “may not“, “need“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed

23、in ETSI deliverables except when used in direct citation. ETSI ETSI TS 102 797-3 V1.2.1 (2014-06)61 Scope The present document provides the Abstract Test Suite (ATS) and partial PIXIT proforma for the protocols specified in ISO 24102-4 1, ISO 24102-5 2 based on the related TSS Communications Access

24、for Land Mobiles (CALM); Test specifications for ITS station management (ISO 24102); Part 1: Protocol Implementation Conformance Statement (PICS) specification“. 4 ETSI TS 102 797-2 (V1.2.1): “Intelligent Transport Systems (ITS); Communications Access for Land Mobiles (CALM); Test specifications for

25、 ITS station management (ISO 24102); Part 2: Test Suite Structure and Test Purposes (TSS Protocol and profile conformance testing specifications; Standardization methodology“. 8 ETSI ES 201 873-1: “Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 1:

26、TTCN-3 Core Language“. 9 ETSI ES 201 873-7: “Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 7: Using ASN.1 with TTCN-3“. 10 ETSI ES 202 784: “Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; TTCN-3 Langu

27、age Extensions: Advanced Parameterization“. ETSI ETSI TS 102 797-3 V1.2.1 (2014-06)72.2 Informative references The following referenced documents are not necessary for the application of the present document but they assist the user with regard to a particular subject area. i.1 ISO 24102-3:2013: “In

28、telligent transport systems - Communications access for land mobiles (CALM) - ITS station management - Part 3: Service access points“. i.2 ISO 21217:2014: “Intelligent transport systems - Communications access for land mobiles (CALM) - Communications architecture“. i.3 ISO 21218:2013: “Intelligent t

29、ransport systems - Communications access for land mobiles (CALM) - Medium service access point“. i.4 ETSI EG 202 798: “Intelligent Transport Systems (ITS); Testing; Framework for conformance and interoperability testing“. i.5 ETSI TR 103 099 (V1.1.1): “Intelligent Transport Systems (ITS); Architectu

30、re of conformance validation framework“. i.6 ISO 29281-1:2013: “Intelligent transport systems - Communication access for land mobiles (CALM) - Non-IP networking - Part 1: Fast networking 7.2 Naming conventions 7.2.1 General guidelines This test suite follows the naming convention guidelines provided

31、 in EG 202 798 i.4. 7.2.2 Usage of Log statements All TTCN-3 log statements use the following format: Three asterisks followed by a blank character. The TTCN-3 test case or function identifier in which the log statement is defined followed by a colon and a blank character. One of the log categories:

32、 INFO, WARNING, ERROR, PASS, FAIL, INCONC, TIMEOUT followed by a colon and a blank character. Free text. ETSI ETSI TS 102 797-3 V1.2.1 (2014-06)16 A blank character followed by three asterisks. EXAMPLE 1: log(“* TC_FSAP_SP_HR_BV_01: INFO: Preamble: IUT was setup properly *“); Furthermore, the follow

33、ing rules are applied for the Fsap ATS: Log statements are used in the body of the functions, so that invocations of functions are visible in the test logs. All TTCN-3 setverdict statements are combined with a log statement following the same above rules (see example 2). EXAMPLE 2: setverdict(pass,

34、“* TC_FSAP_SP_HR _BV_01: PASS: SAM transmitted at prescribed periodicity *“); 7.2.3 Test Case (TC) identifier Table 1 shows the test case naming convention for FSAP ISO 24102-5 2, which follows the test purposes TS 102 797-2 4 naming convention. Table 1: FSAP TC naming conventions TC_ = root FSAP Fa

35、st Service Advertisement Protocol = group SP Service provider SU Service user = sub-group HR Combined ITS-S host and ITS-S router HO ITS-S host only RO ITS-S router only = type of testing BV Valid Behaviour tests BI Invalid Syntax or Behaviour Tests = sequential number 01 to 99 EXAMPLE 1: TP identif

36、ier: TP/FSAP/SP/HR/BV/01 TC identifier: TC_FSAP_SP_HR_BV_01 Table 2 shows the test case naming convention for IICP ISO 24102-4 1, which follows the test purposes TS 102 797-2 4 naming convention. Table 2: IICP TC naming conventions TC_ = root IICP Inter-ITS-SCU communication Protocol = group MGM Man

37、agement COM Communication = type of testing BV Valid Behaviour tests BI Invalid Syntax or Behaviour Tests = sequential number 01 to 99 EXAMPLE 2: TP identifier: TP/IICP/COM/BV/01 TC identifier: TC_IICP_COM_BV_01 ETSI ETSI TS 102 797-3 V1.2.1 (2014-06)17Annex A (normative): Partial PIXIT proforma for

38、 FSAP Notwithstanding the provisions of the copyright clause related to the text of the present document, ETSI grants that users of the present document may freely reproduce the Partial PIXIT proforma in this annex so that it can be used for its intended purposes and may further publish the complete

39、d Partial PIXIT. A.1 Identification summary Table A.1 PIXIT Number: Test Laboratory Name: Date of Issue: Issued to: A.2 ATS summary Table A.2: Summary Protocol Specification: ISO 24102-5 2 Protocol to be tested: FSAP ATS Specification: TS 102 797-3 Abstract Test Method: Clause 5 A.3 Test laboratory

40、Table A.3: Test laboratory Test Laboratory Identification: Test Laboratory Manager: Means of Testing: SAP Address: ETSI ETSI TS 102 797-3 V1.2.1 (2014-06)18A.4 Client identification Table A.4: Client identification Client Identification: Client Test manager: Test Facilities required: A.5 SUT Table A

41、.5: SUT identification Name: Version:SCS Number: Machine configuration: Operating System Identification: IUT Identification: PICS Reference for IUT: Limitations of the SUT: Environmental Conditions: A.6 Protocol layer information A.6.1 Protocol identification Table A.6: Protocol identification Name:

42、 ISO 24102-5 2 Version: PICS References: TS 102 797-1 3 ETSI ETSI TS 102 797-3 V1.2.1 (2014-06)19A.6.2 IUT information Table A.7: Fsap Pixits Identifier Description PX_WL_LOCAL_CIID Comment Identifies the CI on ITS-S host Type EUI64 Def. value 03000AFFFFFF0000O PX_SRC_REMOTE_CIID Comment Identifies

43、the VCI on ITS-S host Type EUI64 Def. value FF000AFFFFFFFFFFO PX_APP_PORT_NUMBER Comment The service provider ITS station Type PortNumber Def. value 12345 PX_LOCAL_PORT_NUMBER Comment The service provider ITS station Type PortNumber Def. value 55555 PX_REMOTE_PORT_NUMBER Comment The service provider

44、 ITS station Type PortNumber Def. value 5556 PX_ITS_AID Comment The globally unique ITS-AID of the ITS-S application Type ITSaid Def. value content := 8 PX_SERVER_ID Comment The globally unique ITS-AID of the ITS-S application Type StationID Def. value 11111111O PX_IUT_ID Comment The globally unique

45、 ITS-AID of the ITS-S application Type StationID Def. value 00003930O PX_UNKNOWN_ITS_AID Comment An unknown ITS-AID of the ITS-S application Type ITSaid Def. value content := 126 PX_SESSION_PORT Comment A session port value Type PortNumber Def. value portLong := 7896 PX_NO_SESSION_PORT Comment An un

46、specified session port value Type PortNumber Def. value portLong := c_unknown_portLong PX_UNKNOWN_SESSION_PORT Comment An unknown session port value Type PortNumber Def. value portLong := 1234 PX_APPLICATION_ID Comment ITS application object ID (ITS-AID) for GCregServer MF-REQUEST Type ApplicationID

47、 Def. value hostITS_scuId := 1, seqNumber := itsaid := PX_ITS_AID, instance := 1, flowNo := 0 ETSI ETSI TS 102 797-3 V1.2.1 (2014-06)20Identifier Description PX_CLIENT_APPLICATION_ID Comment ITS application object ID (ITS-AID) for GCregClient MF-REQUEST Type ApplicationID Def. value hostITS_scuId :=

48、 2, seqNumber := itsaid := PX_ITS_AID, instance := 1, flowNo := 0 PX_GSCHED_ACCESS_TECH_NONIP Comment Scheduling information for registration / deregistration request in order to select the proper VCI in the ITS-station for communication medium field indicates a request of specific access technology

49、 Type GCsched Def. value medium := c_medType_iso21215, directivity := mode := 0, dirPredef := 0, fill := 0000000B, dirVar := , / End of field directivity gcInterval := float2int(PICS_SAM_RETRANSMIT_TIMER) PX_GSCHED_LOG_PERIOD_TIME_ACCESS_TECH_NONIP Comment Scheduling information for registration / deregistration request in order to select the proper VCI in the ITS-station for communication medium field indicates a request of an unknown a