ETSI TS 102 871-1-2015 Intelligent Transport Systems (ITS) Testing Conformance test specifications for GeoNetworking ITS-G5 Part 1 Test requirements and Protocol Implementation Con.pdf

1、 ETSI TS 102 871-1 V1.3.1 (2015-06) Intelligent Transport Systems (ITS); Testing; Conformance test specifications for GeoNetworking ITS-G5; Part 1: Test requirements and Protocol Implementation Conformance Statement (PICS) pro forma TECHNICAL SPECIFICATION ETSI ETSI TS 102 871-1 V1.3.1 (2015-06)2 Re

2、ference RTS/ITS-00343 Keywords ITS, network, PICS, testing ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Impor

3、tant notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written

4、authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document sh

5、ould be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following s

6、ervices: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version

7、 shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2015. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registere

8、d for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 102 871-1 V1.3.1 (2015-06)3 Contents Intellectual

9、 Property Rights 4g3Foreword . 4g3Modal verbs terminology 4g31 Scope 5g32 References 5g32.1 Normative references . 5g32.2 Informative references 5g33 Definitions and abbreviations . 5g33.1 Definitions 5g33.2 Abbreviations . 5g34 Conformance requirement concerning PICS 6g3Annex A (normative): GEONETW

10、 PICS pro forma (Media independent) . 7g3A.1 Partial cancellation of copyright . 7g3A.2 Guidance for completing the ICS pro forma 7g3A.2.1 Purposes and structure 7g3A.2.2 Abbreviations and conventions 7g3A.2.3 Instructions for completing the ICS pro forma . 9g3A.3 Identification of the implementatio

11、n 9g3A.3.1 Introduction 9g3A.3.2 Date of the statement 9g3A.3.3 Implementation Under Test (IUT) identification . 9g3A.3.4 System Under Test (SUT) identification 10g3A.3.5 Product supplier 10g3A.3.6 Client (if different from product supplier) 10g3A.3.7 ICS contact person 11g3A.4 Identification of the

12、 protocol 11g3A.5 Global statement of conformance . 11g3A.6 Tables . 12g3A.6.1 Introduction 12g3A.6.2 Media independent . 12g3A.6.2.1 Introduction. 12g3A.6.2.2 GeoNetworking packet structure 12g3A.6.2.3 Basic Header . 12g3A.6.2.4 Common Header . 13g3A.6.2.5 Extended Header . 14g3A.6.2.5.1 GUC packet

13、 . 14g3A.6.2.5.2 TSB packet 14g3A.6.2.5.3 SHB packet . 14g3A.6.2.5.4 GBC/GAC packet . 14g3A.6.2.5.5 BEACON packet . 14g3A.6.2.5.6 LS Request header. 15g3A.6.2.5.7 LS Reply header 15g3A.6.2.6 Common elements 15g3A.6.2.6.1 Lifetime . 15g3A.6.2.6.2 Position . 15g3A.6.2.6.3 LongPositionVector 15g3A.6.2.

14、6.4 ShortPositionVector 16g3A.6.2.6.5 GN_Addr . 16g3A.6.2.7 Protocol operation . 16g3A.6.2.8 Protocol constants . 18g3History 20g3ETSI ETSI TS 102 871-1 V1.3.1 (2015-06)4 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The

15、information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from

16、 the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/ipr.etsi.org). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or

17、the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI Technical Committee Intelligent Transport Systems (ITS). The present document is part 1 of a multi-part deliverable coverin

18、g Conformance test specifications for Geonetworking ITS-G5 as identified below: Part 1: “Test requirements and Protocol Implementation Conformance Statement (PICS) pro forma“; Part 2: “Test Suite Structure and Test Purposes (TSS Part 3: “Abstract Test Suite (ATS) and Protocol Implementation eXtra In

19、formation for Testing (PIXIT)“. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of prov

20、isions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 102 871-1 V1.3.1 (2015-06)5 1 Scope The present document provides the Protocol Implementation Conformance Statement (PICS) pro forma for Conformance test specifications for Geonetwor

21、king ITS-G5 as defined in ETSI EN 302 636-4-1 1 in compliance with the relevant requirements and in accordance with the relevant guidance given in ISO/IEC 9646-7 3. 2 References 2.1 Normative references References are either specific (identified by date of publication and/or edition number or versio

22、n number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the reference document (including any amendments) applies. Referenced documents which are not found to be publicly available in the expected location might be found

23、at http:/docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents are necessary for the application of the present document. 1 ETSI EN 302 636-4-1 (V1.2.1):

24、“Intelligent Transport Systems (ITS); Vehicular Communications; GeoNetworking; Part 4: Geographical addressing and forwarding for point-to-point and point-to-multipoint communications; Sub-part 1: Media-Independent Functionality“. 2 ISO/IEC 9646-1 (1994): “Information technology - Open Systems Inter

25、connection - Conformance testing methodology and framework - Part 1: General concepts“. 3 ISO/IEC 9646-7 (1995): “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 7: Implementation Conformance Statements“. 2.2 Informative references Referen

26、ces are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the reference document (including any amendments) applies. NOTE: While any

27、hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents are not necessary for the application of the present document but they assist the user with regard to a particular subject area. Not applicable

28、. 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in ETSI EN 302 636-4-1 1, ISO/IEC 9646-1 2 and ISO/IEC 9646-7 3 apply. 3.2 Abbreviations For the purposes of the present document, the following abbreviations apply: BTP-A Basi

29、c Transport Protocol A BTP-B Basic Transport Protocol B CBF Contention-Based Forwarding ETSI ETSI TS 102 871-1 V1.3.1 (2015-06)6 DE_PV Destination Position Vector ELIP Ellipse GAC Geographically-Scoped Anycast GBC Geographically-Scoped BroadcastGUC Geo Unicast HST Header SubtypeHT Header Type ICS Im

30、plementation Conformance Statement ITS Intelligent Transportation Systems ITS-G5 5 GHz wireless communication IUT Implementation Under Test LS Location Service LT LifetimeMHL Maximum Hop Limit MID MAC ID NH Next Header PAI Position Accuracy Indicator PDU Protocol Data Unit PICS Protocol Implementati

31、on Conformance Statement PL Payload Length RHL Remaining Hop Limit SCC Station Country Code SHB Single Hop Broadcast SN Sequence Number SO_PV Source Position Vector ST Station Type SUT System Under Test TC Test Case TSB Topology Scoped Broadcast TST Timestamp 4 Conformance requirement concerning PIC

32、S If it claims to conform to the present document, the actual PICS pro forma to be filled in by a supplier shall be technically equivalent to the text of the PICS pro forma given in annex A, and shall preserve the numbering, naming and ordering of the pro forma items. An ICS which conforms to the pr

33、esent document shall be a conforming PICS pro forma completed in accordance with the instructions for completion given in clause A.2 ETSI ETSI TS 102 871-1 V1.3.1 (2015-06)7 Annex A (normative): GEONETW PICS pro forma (Media independent) A.1 Partial cancellation of copyright Notwithstanding the prov

34、isions of the copyright clause related to the text of the present document, ETSI grants that users of the present document may freely reproduce the GEONETW PICS pro forma in this annex so that it can be used for its intended purposes and may further publish the completed GEONETW PICS. A.2 Guidance f

35、or completing the ICS pro forma A.2.1 Purposes and structure The purpose of this PICS pro forma is to provide a mechanism whereby a supplier of an implementation of the requirements defined in ETSI EN 302 636-4-1 1 may provide information about the implementation in a standardized manner. The PICS p

36、ro forma is subdivided into clauses for the following categories of information: - guidance for completing the ICS pro forma; - identification of the implementation; - identification of the ETSI EN 302 636-4-1 1; - global statement of conformance; - PICS pro forma tables. A.2.2 Abbreviations and con

37、ventions The ICS pro forma contained in this annex is comprised of information in tabular form in accordance with the guidelines presented in ISO/IEC 9646-7 3. Item column The item column contains a number which identifies the item in the table. Item description column The item description column de

38、scribes in free text each respective item (e.g. parameters, timers, etc.). It implicitly means “is supported by the implementation?“. ETSI ETSI TS 102 871-1 V1.3.1 (2015-06)8 Status column The following notations, defined in ISO/IEC 9646-7 3, are used for the status column: m mandatory - the capabil

39、ity is required to be supported. o optional - the capability may be supported or not. n/a not applicable - in the given context, it is impossible to use the capability. x prohibited (excluded) - there is a requirement not to use this capability in the given context. o.i qualified optional - for mutu

40、ally exclusive or selectable options from a set. “i“ is an integer which identifies an unique group of related optional items and the logic of their selection which is defined immediately following the table. c.i conditional - the requirement on the capability (“m“, “o“, “x“ or “n/a“) depends on the

41、 support of other optional or conditional items. “i“ is an integer identifying an unique conditional status expression which is defined immediately following the table. i irrelevant (out-of-scope) - capability outside the scope of the reference specification. No answer is requested from the supplier

42、. NOTE 1: This use of “i“ status is not to be confused with the suffix “i“ to the “o“ and “c“ statuses above. Reference column The reference column makes reference to ETSI EN 302 636-4-1 1, except where explicitly stated otherwise. Support column The support column shall be filled in by the supplier

43、 of the implementation. The following common notations, defined in ISO/IEC 9646-7 3, are used for the support column: Y or y supported by the implementation. N or n not supported by the implementation. N/A, n/a or - no answer required (allowed only if the status is n/a, directly or after evaluation

44、of a conditional status). NOTE 2: As stated in ISO/IEC 9646-7 3, support for a received PDU requires the ability to parse all valid parameters of that PDU. Supporting a PDU while having no ability to parse a valid parameter is non-conformant. Support for a parameter on a PDU means that the semantics

45、 of that parameter are supported. Values allowed column The values allowed column contains the type, the list, the range, or the length of values allowed. The following notations are used: - range of values: example: 5 20 - list of values: , , ., example: 2, 4, 6, 8, 9 example: 1101B, 1011B, 1111B e

46、xample: 0AH, 34H, 2FH - list of named values: (), (), ., () example: reject(1), accept(2) - length: size ( ) example: size (1 8) ETSI ETSI TS 102 871-1 V1.3.1 (2015-06)9 Values supported column The values supported column shall be filled in by the supplier of the implementation. In this column, the

47、values or the ranges of values supported by the implementation shall be indicated. References to items For each possible item answer (answer in the support column) within the ICS pro forma a unique reference exists, used, for example, in the conditional expressions. It is defined as the table identi

48、fier, followed by a solidus character “/“, followed by the item number in the table. If there is more than one support column in a table, the columns are discriminated by letters (a, b, etc.), respectively. EXAMPLE 1: A.5/4 is the reference to the answer of item 4 in table 5 of annex A. EXAMPLE 2: A

49、.6/3b is the reference to the second answer (i.e. in the second support column) of item 3 in table 6 of annex A. Prerequisite line A prerequisite line takes the form: Prerequisite: . A prerequisite line after a clause or table title indicates that the whole clause or the whole table is not required to be completed if the predicate is FALSE. A.2.3 Instructions for completing the ICS pro forma The supplier of the implementation shall complete the ICS pro forma in each of the spaces provided. In particular, an explicit answer shall be e