ETSI TS 102 891-1-2010 Technical Committee for IMS Network Testing (INT) Message Waiting Indication (MWI) using IP Multimedia (IM) Core Network (CN) subsystem Part 1 Protocol Imple.pdf

1、 ETSI TS 102 891-1 V3.1.1 (2010-07)Technical Specification Technical Committee for IMS Network Testing (INT);Message Waiting Indication (MWI) usingIP Multimedia (IM) Core Network (CN) subsystem;Part 1: Protocol ImplementationConformance Statement (PICS)ETSI ETSI TS 102 891-1 V3.1.1 (2010-07)2Referen

2、ce DTS/INT-00023-1 Keywords MWI, PICS, SIP, testing ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important no

3、tice Individual copies of the present document can be downloaded from: http:/www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portab

4、le Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information

5、on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http:/portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may

6、be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2010. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTM, TIPHONTM, the TIPHON logo and the ETSI logo are Trade Mar

7、ks of ETSI registered for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. LTE is a Trade Mark of ETSI currently being registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM a

8、nd the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 102 891-1 V3.1.1 (2010-07)3Contents Intellectual Property Rights 4g3Foreword . 4g3Introduction 4g31 Scope 5g32 References 5g32.1 Normative references . 5g32.2 Informative references 5g33 Definitions and abbrevi

9、ations . 5g33.1 Definitions 5g33.2 Abbreviations . 6g3Annex A (normative): PICS proforma for TS 124 406 . 7g3A.1 Guidance for completing the ICS proforma . 7g3A.1.1 Purposes and structure 7g3A.1.2 Abbreviations and conventions 7g3A.1.3 Instructions for completing the PICS proforma 8g3A.2 Identificat

10、ion of the implementation 9g3A.2.1 Date of the statement 9g3A.2.2 Implementation Under Test (IUT) identification . 9g3A.2.3 System Under Test (SUT) identification 9g3A.2.4 Product supplier 9g3A.2.5 Client (if different from product supplier) 10g3A.2.6 PICS contact person . 11g3A.3 Identification of

11、the MWI specification . 11g3A.4 Global statement of conformance . 11g3A.5 Roles . 12g3A.6 User role . 12g3A.6.1 Major capabilities . 12g3A.7 Network role . 12g3Annex B (informative): Bibliography . 13g3History 14g3ETSI ETSI TS 102 891-1 V3.1.1 (2010-07)4Intellectual Property Rights IPRs essential or

12、 potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Esse

13、ntial, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI.

14、 No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by IMS Network Testing (INT). Th

15、e present document is part 1 of a multi-part deliverable covering the test specification for Message Waiting Indication (MWI), as identified below: Part 1: Protocol Implementation Conformance Statement (PICS); Part 2: Test Suite Structure and Test Purposes (TSS Part 3: Abstract Test Suite (ATS) and

16、partial Protocol Implementation eXtra Information for Testing (PIXIT). Introduction The present document (TS) has been produced by ETSI Technical Committee IMS Network Testing (INT). To evaluate conformance of a particular implementation, it is necessary to have a statement of which capabilities and

17、 options have been implemented for a telecommunication specification. Such a statement is called a Protocol Implementation Conformance Statement (PICS). ETSI ETSI TS 102 891-1 V3.1.1 (2010-07)51 Scope The present document specifies the Protocol Implementation Conformance Statement of the Message Wai

18、ting Indication (MWI) service, based on 3GPP stage three Protocol Description of the Message Waiting Indication (MWI) service, based on stage one and two of the ISDN MWI supplementary services. 2 References References are either specific (identified by date of publication and/or edition number or ve

19、rsion number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the reference document (including any amendments) applies. Referenced documents which are not found to be publicly available in the expected location might be fo

20、und at http:/docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee their long term validity. 2.1 Normative references The following referenced documents are necessary for the application of the present document. 1 ET

21、SI TS 124 406 (2008): “Digital cellular telecommunications system (Phase 2+); Universal Mobile Telecommunications System (UMTS); TISPAN; PSTN/ISDN simulation services; Message Waiting Indication (MWI): Protocol specification (3GPP TS 24.406 Release 8)“. 2 ISO/IEC 9646-1: “Information technology - Op

22、en systems interconnection - Conformance testing methodology and framework - Part 1: General concepts“. 3 ISO/IEC 9646-7: “Information technology - Open systems interconnection - Conformance testing methodology and framework - Part 7: Implementation Conformance Statements“. 4 IETF RFC 3842: “A Messa

23、ge Summary and Message Waiting Indication Event Package for the Session Initiation Protocol (SIP)“. 2.2 Informative references The following referenced documents are not necessary for the application of the present document but they assist the user with regard to a particular subject area. Not appli

24、cable. 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in TS 124 406 1, ISO/IEC 9646-1 2, ISO/IEC 9646-7 3 and the following apply: PICS proforma: document, in the form of a questionnaire, which when completed for an implement

25、ation or system becomes a PICS Protocol ICS (PICS): ICS for an implementation or system claimed to conform to a given protocol specification NOTE: This may contain additional information. ETSI ETSI TS 102 891-1 V3.1.1 (2010-07)6Protocol Implementation Conformance Statement (PICS): statement made by

26、the supplier of an implementation or system claimed to conform to a given protocol specification, stating which capabilities have been implemented 3.2 Abbreviations For the purposes of the present document, the abbreviations given in TS 124 406 1 and the following apply: ICS Implementaion Conformanc

27、e Statement IUT Implementation Under Test MA Message Account MIME Multipurpose Internet Mail Extensions MNUA MWI Notifier User Agent MSUA MWI Subscriber User Agent MWI Message Waiting Indication PDU Protocol Data Unit PICS Protocol Implementation Conformance Statement SCS System Conformance Statemen

28、t SUT System Under Test ETSI ETSI TS 102 891-1 V3.1.1 (2010-07)7Annex A (normative): PICS proforma for TS 124 406 Notwithstanding the provisions of the copyright clause related to the text of the present document, ETSI grants that users of the present document may freely reproduce the ICS proforma i

29、n this annex so that it can be used for its intended purposes and may further publish the completed ICS. A.1 Guidance for completing the ICS proforma A.1.1 Purposes and structure The purpose of this PICS proforma is to provide a mechanism whereby a supplier of an implementation of the requirements d

30、efined in TS 124 406 1 may provide information about the implementation in a standardized manner. The ICS proforma is subdivided into clauses for the following categories of information: - guidance for completing the ICS proforma; - identification of the implementation; - identification of the ; - g

31、lobal statement of conformance; - roles; - user role; - network role. A.1.2 Abbreviations and conventions The PICS proforma contained in this annex is comprised of information in tabular form in accordance with the guidelines presented in ISO/IEC 9646-7 3. Item column The item column contains a numb

32、er which identifies the item in the table. Item description column The item description column describes in free text each respective item (e.g. parameters, timers, etc.). It implicitly means “is supported by the implementation?“. ETSI ETSI TS 102 891-1 V3.1.1 (2010-07)8Status column The following n

33、otations, defined in ISO/IEC 9646-7 3, are used for the status column: m mandatory - the capability is required to be supported. o optional - the capability may be supported or not. n/a not applicable - in the given context, it is impossible to use the capability. x prohibited (excluded) - there is

34、a requirement not to use this capability in the given context. o.i qualified optional - for mutually exclusive or selectable options from a set. “i“ is an integer which identifies a unique group of related optional items and the logic of their selection which is defined immediately following the tab

35、le. ci conditional - the requirement on the capability (“m“, “o“, “x“ or “n/a“) depends on the support of other optional or conditional items. “i“ is an integer identifying a unique conditional status expression which is defined immediately following the table. Reference column The reference column

36、makes reference to TS 124 406 1, except where explicitly stated otherwise. Support column The support column shall be filled in by the supplier of the implementation. The following common notations, defined in ISO/IEC 9646-7 3, are used for the support column: Y or y supported by the implementation.

37、 N or n not supported by the implementation. N/A, n/a or - no answer required (allowed only if the status is n/a, directly or after evaluation of a conditional status). If this PICS proforma is completed in order to describe a multiple-profile support in a system, it is necessary to be able to answe

38、r that a capability is supported for one profile and not supported for another. In that case, the supplier shall enter the unique reference to a conditional expression, preceded by “?“ (e.g. ?3). This expression shall be given in the space for comments provided at the bottom of the table. It uses pr

39、edicates defined in the SCS, each of which refers to a single profile and which takes the value TRUE if and only if that profile is to be used. EXAMPLE 1: ?3: IF prof1 THEN Y ELSE N In case of protocol, the following text should be added: NOTE: As stated in ISO/IEC 9646-7 3, support for a received P

40、DU requires the ability to parse all valid parameters of that PDU. Supporting a PDU while having no ability to parse a valid parameter is non-conformant. Support for a parameter on a PDU means that the semantics of that parameter are supported. Prerequisite line A prerequisite line takes the form: P

41、rerequisite: . A prerequisite line after a clause or table title indicates that the whole clause or the whole table is not required to be completed if the predicate is FALSE. A.1.3 Instructions for completing the PICS proforma The supplier of the implementation shall complete the PICS proforma in ea

42、ch of the spaces provided. In particular, an explicit answer shall be entered, in each of the support column boxes provided, using the notation described in clause A.1.2. ETSI ETSI TS 102 891-1 V3.1.1 (2010-07)9However, the tables containing in “user role“ clause shall only be completed for user imp

43、lementations, and the tables containing in “network role“ clause shall only be completed for network implementations. If necessary, the supplier may provide additional comments in space at the bottom of the tables or separately. More detailed instructions are given at the beginning of the different

44、clauses of the PICS proforma. A.2 Identification of the implementation Identification of the Implementation Under Test (IUT) and the system in which it resides (the System Under Test (SUT) should be filled in so as to provide as much detail as possible regarding version numbers and configuration opt

45、ions. The product supplier information and client information should both be filled in if they are different. A person who can answer queries regarding information supplied in the PICS should be named as the contact person. A.2.1 Date of the statement . A.2.2 Implementation Under Test (IUT) identifi

46、cation IUT name: . . IUT version: . A.2.3 System Under Test (SUT) identification SUT name: . . Hardware configuration: . . . Operating system: . A.2.4 Product supplier Name: . ETSI ETSI TS 102 891-1 V3.1.1 (2010-07)10Address: . . . Telephone number: . Facsimile number: . E-mail address: . Additional

47、 information: . . . A.2.5 Client (if different from product supplier) Name: . Address: . . . Telephone number: . Facsimile number: . E-mail address: . Additional information: . . ETSI ETSI TS 102 891-1 V3.1.1 (2010-07)11A.2.6 PICS contact person (A person to contact if there are any queries concerni

48、ng the content of the ICS) Name: . Telephone number: . Facsimile number: . E-mail address: . Additional information: . . . A.3 Identification of the MWI specification This PICS proforma applies to the following standard: ETSI TS 124 406 (2008): “Digital cellular telecommunications system (Phase 2+);

49、 Universal Mobile Telecommunications System (UMTS); TISPAN; PSTN/ISDN simulation services; Message Waiting Indication (MWI): Protocol specification (3GPP TS 24.406 Release 8)“. A.4 Global statement of conformance Are all mandatory capabilities implemented? (Yes/No) . NOTE: Answering “No“ to this question indicates non-conformance to the MWI specification. Non-supported mandatory capabilities are to be identified in the PICS, with an explanation of why the implementation is non-conforming, on pages attached to the PICS proforma. ETSI ETSI TS 102 89