ETSI TS 102 932-1-2011 Railway Telecommunications (RT) ER-GSM frequencies Part 1 ER-GSM additional radio aspects (V1 1 1)《铁路通信(RT) ER-GSM频率 第1部分 ER-GSM附加无线电方面(版本1 1 1)》.pdf

1、 ETSI TS 102 932-1 V1.1.1 (2011-11) Railway Telecommunications (RT); ER-GSM frequencies; Part 1: ER-GSM additional radio aspects Technical Specification ETSI ETSI TS 102 932-1 V1.1.1 (2011-11)2Reference DTS/RT-EGSM-R-001-1 Keywords ER-GSM, R-GSM, radio ETSI 650 Route des Lucioles F-06921 Sophia Anti

2、polis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice Individual copies of the present document can be downloaded from: http:/www.etsi.org The prese

3、nt document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers

4、of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/sta

5、tus/status.asp If you find errors in the present document, please send your comment to one of the following services: http:/portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restricti

6、on extend to reproduction in all media. European Telecommunications Standards Institute 2011. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its

7、Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 102 932-1 V1.1.1 (2011-11)3Contents Intellectual Property Rights 4g3Foreword . 4g31 Scope 5g32 References 5g32.1 Normative references . 5g32.2 Informative r

8、eferences 6g33 Abbreviations . 6g34 Frequency bands and channel arrangement 6g35 Transmitter characteristics . 7g35.1 Base station System (BSS) . 7g35.2 Mobile station (MS) . 7g35.3 Repeaters 7g36 Receiver characteristics 7g36.1 Base station System (BSS) . 7g36.2 Mobile station (MS) . 7g36.3 Repeate

9、rs 7g37 Other requirements . 8g3Annex A (normative): Environmental conditions . 9g3Annex B (informative): Bibliography . 10g3History 11g3ETSI ETSI TS 102 932-1 V1.1.1 (2011-11)4Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI

10、. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is availabl

11、e from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/ipr.etsi.org). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 31

12、4 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI Technical Committee Railway Telecommunications (RT). The present document is part 1 of a multi-part deliverable cover

13、ing the Railway Telecommunications; ER-GSM frequencies, as identified below: Part 1: “ER-GSM additional radio aspects“; Part 2: “ER-GSM additional radio conformance testing“. ETSI ETSI TS 102 932-1 V1.1.1 (2011-11)51 Scope ECC Decision ECC/DEC/(04)06 i.2 of the 19thMarch 2004 and amended on the 26th

14、 June 2009 provides a possibility for a GSM-R extension into the bands 873 MHz to 876 MHz and 918 MHz to 921 MHz on a national basis. The present document defines the requirements for radio Transmission and Reception of mobile station (MS) and BTS for the pan-European digital cellular telecommunicat

15、ion system GSM-R. Requirements are defined for two categories of parameters: Those that are required to provide compatibility between the radio channels, connected either to separate or common antennas, that are used in the system. This category also includes parameters providing compatibility with

16、existing systems in the same or adjacent frequency bands. Those that define the transmission and reception requirements for the MS and base stations. The present document defines some RF characteristics for the MS and base stations for the frequencies band R-GSM/ER-GSM. The precise measurement metho

17、ds are specified in TS 102 932-2 4 and TS 100 607-1 2 and TS 151 026 7. Equipment may operate on more than one of the frequency bands specified in clause 4. MS defined in EN 300 919 1, are referred to as “Multi band MSs“ in the present document. Equipment operating at the edge of the transmit and re

18、ceive band might be subject to regulatory restrictions in some geographical regions. In areas where systems coexist the received interference power might have to be limited. Coexistence scenarios have been investigated in ECC Report 162 i.3 providing also recommendations for the application of mitig

19、ation techniques. 2 References References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the reference document (including any

20、 amendments) applies. Referenced documents which are not found to be publicly available in the expected location might be found at http:/docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee their long term validity.

21、 2.1 Normative references The following referenced documents are necessary for the application of the present document. 1 ETSI EN 300 919: “Digital cellular telecommunications system (Phase 2+) (GSM); Types of Mobile Stations (MS) (GSM 02.06)“. 2 ETSI TS 100 607-1: “Digital cellular telecommunicatio

22、ns system (Phase 2+); Mobile Station (MS) conformance specification; Part 1: Conformance specification (3GPP 11.10-1 Release 1999)“. 3 ETSI TS 100 910: “Digital cellular telecommunications system (Phase 2+); Radio transmission and reception (3GPP TS 05.05 Release 1999)“. 4 ETSI TS 102 932-2: “Railwa

23、y Telecommunications ER-GSM frequencies; Part 2: ER-GSM additional radio conformance testing“. 5 ETSI EN 300 609-4: “Global System for Mobile communications (GSM); Part 4: Harmonized EN for GSM Repeaters covering the essential requirements of article 3.2 of the R GSM-R improved receiver parameters;

24、Part 1: Requirements for radio reception“. 7 ETSI TS 151 026: “Digital cellular telecommunications system (Phase 2+); Base Station System (BSS) equipment specification; Part 4: Repeaters (3GPP TS 51.026 Release 10)“. 2.2 Informative references The following referenced documents are not necessary for

25、 the application of the present document but they assist the user with regard to a particular subject area. i.1 ETSI TR 101 748: “Digital cellular telecommunications system (Phase 2+) (GSM); Abbreviations and acronyms (GSM 01.04)“. i.2 ECC/DEC/(04)06: “ECC Decision of 19 March 2004 on the availabili

26、ty of frequency bands for the introduction of Wide Band Digital Land Mobile PMR/PAMR in the 400 MHz and 800/900 MHz bands“. i.3 ECC Report 162: “Practical Mechanism to improve the Compatibility between GSM-R and Public Mobile Networks and Guidance on Practical Coordination“. 3 Abbreviations For the

27、purposes of the present document, the abbreviations given in TR 101 748 i.1 apply. 4 Frequency bands and channel arrangement i) Railways GSM 900 Band, R-GSM (includes Standard and Extended GSM 900 Band): - for Railways GSM 900 band, the system is required to operate in the following frequency band:

28、square4 876 MHz to 915 MHz: mobile transmit, base receive; square4 921 MHz to 960 MHz: base transmit, mobile receive. ii) Extended Railways GSM 900 Band, ER-GSM (includes Standard and Extended GSM 900 Band): - for Railways GSM 900 band, the system is required to operate in the following frequency ba

29、nd: square4 873 MHz to 915 MHz: mobile transmit, base receive; square4 918 MHz to 960 MHz: base transmit, mobile receive. NOTE 1: The term GSM 900 is used for any GSM system, which operates in any 900 MHz band. NOTE 2: The BTS may cover a complete band, or the BTS capabilities may be restricted to a

30、 subset only, depending on the operators needs. The carrier spacing is 200 kHz. ETSI ETSI TS 102 932-1 V1.1.1 (2011-11)7The carrier frequency is designated by the absolute radio frequency channel number (ARFCN). If we call Fl(n) the frequency value of the carrier ARFCN n in the lower band, and Fu(n)

31、 the corresponding frequency value in the upper band, we have: Table 1 Band Frequency value of the carrier ARFCN in the lower band Frequency channel number (ARFCN) Frequency value of the carrier ARFCN in the upper band R-GSM 900 Fl(n) = 890 + 0,2n Fl(n) = 890 + 0,2 (n - 1 024) 0 n 124 955 n 974 Fu(n

32、) = Fl(n) + 45 ER-GSM 900 Fl(n) = 890 + 0,2n Fl(n) = 890 + 0,2 (n - 1 024) 0 n 124 940 n 974 Fu(n) = Fl(n) + 45 NOTE: Frequencies are in MHz. 5 Transmitter characteristics 5.1 Base station System (BSS) Transmitter characteristics shall be the same as specified in TS 100 910 3 with the exceptions tha

33、t the requirements are applicable to the entire ER-GSM Band. 5.2 Mobile station (MS) Transmitter characteristics shall be the same as specified in TS 100 910 3 with the exceptions that the requirements are applicable to the entire ER-GSM Band. This apply to MSs defined in EN 300 919 1 and in TS 102

34、933-1 6. 5.3 Repeaters Transmitter characteristics shall be the same as specified in EN 300 609-4 5 with the exceptions that the requirements are applicable to the entire ER-GSM Band. 6 Receiver characteristics 6.1 Base station System (BSS) Receiver characteristics shall be the same as specified in

35、TS 100 910 3 with the exceptions that the requirements are applicable to the entire ER-GSM Band. 6.2 Mobile station (MS) Receiver characteristics shall be the same as specified in TS 100 910 3 and TS 102 933-1 6 with the exceptions that the requirements are applicable to the entire ER-GSM Band. This

36、 apply to MSs defined in EN 300 919 1 and in TS 102 933-1 6. 6.3 Repeaters Receiver characteristics shall be the same as specified in TS 100 910 3 with the exceptions that the requirements are applicable to the entire ER-GSM Band. ETSI ETSI TS 102 932-1 V1.1.1 (2011-11)87 Other requirements RF chara

37、cteristics which are not explicitly addressed in the present document shall be taken from TS 100 910 3 and from TS 102 933-1 7. Unless otherwise stated, the environmental requirements defined in the corresponding standards to specified equipment shall apply. ETSI ETSI TS 102 932-1 V1.1.1 (2011-11)9A

38、nnex A (normative): Environmental conditions Unless otherwise stated, the environmental requirements defined in the corresponding standards to specified equipment shall apply. ETSI ETSI TS 102 932-1 V1.1.1 (2011-11)10Annex B (informative): Bibliography ETSI TS 102 281: “Railways Telecommunications (RT); Global System for Mobile communications (GSM); Detailed requirements for GSM operation on Railways“. ETSI ETSI TS 102 932-1 V1.1.1 (2011-11)11History Document history V1.1.1 November 2011 Publication