1、 ETSI TS 102 933-2 V2.1.1 (2015-06) Railway Telecommunications (RT); GSM-R improved receiver parameters; Part 2: Radio conformance testing TECHNICAL SPECIFICATION ETSI ETSI TS 102 933-2 V2.1.1 (2015-06)2 Reference RTS/RT-0033 Keywords ER-GSM, R-GSM ETSI 650 Route des Lucioles F-06921 Sophia Antipoli
2、s Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present docum
3、ent may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/o
4、r in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current sta
5、tus of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reprodu
6、ced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction
7、extend to reproduction in all media. European Telecommunications Standards Institute 2015. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Mem
8、bers and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 102 933-2 V2.1.1 (2015-06)3 Contents Intellectual Property Rights 5g3Foreword . 5g3Modal verbs terminology 5g31 Scope 6g32 References 6g32.1 Normative referenc
9、es . 6g32.2 Informative references 6g33 Abbreviations . 7g34 Receiver characteristics for 8 Watt mobiles . 7g34.0 General . 7g34.1 Reference sensitivity 7g34.2 Blocking with CW interfering Signals . 8g34.2.1 Blocking and spurious response - speech channels . 8g34.2.1.1 Definition and applicability .
10、 8g34.2.1.2 Conformance requirement. 8g34.2.1.3 Test purpose 8g34.2.1.4 Method of test . 9g34.2.1.4.1 Initial conditions 9g34.2.1.4.2 Procedure . 9g34.2.1.5 Test requirements 10g34.2.2 Blocking and spurious response - control channels 11g34.2.2.1 Definition and applicability . 11g34.2.2.2 Conformanc
11、e requirement. 11g34.2.2.3 Test purpose 12g34.2.2.4 Method of test . 12g34.2.2.4.1 Initial conditions 12g34.2.2.4.2 Procedure . 12g34.2.2.5 Test requirements 13g34.3 Blocking with Broadband interfering Signals 14g34.3.1 Blocking and spurious response - speech channels . 14g34.3.1.1 Definition and ap
12、plicability . 14g34.3.1.2 Conformance requirement. 14g34.3.1.3 Test purpose 14g34.3.1.4 Method of test . 15g34.3.1.4.1 Initial conditions 15g34.3.1.4.2 Procedure . 15g34.3.1.5 Test requirements 15g34.3.2 Blocking and spurious response - control channels 15g34.3.2.1 Definition and applicability . 15g
13、34.3.2.2 Conformance requirement. 16g34.3.2.3 Test purpose 16g34.3.2.4 Method of test . 16g34.3.2.4.1 Initial conditions 16g34.3.2.4.2 Procedure . 16g35 Receiver characteristics for 2 Watt mobiles . 17g35.0 General . 17g35.1 Reference sensitivity 17g35.2 Blocking with CW interfering Signals . 18g35.
14、2.1 Blocking and spurious response - speech channels . 18g35.2.1.1 Definition and applicability . 18g35.2.1.2 Conformance requirement. 18g35.2.1.3 Test purpose 18g35.2.1.4 Method of test . 18g35.2.1.4.1 Initial conditions 18g3ETSI ETSI TS 102 933-2 V2.1.1 (2015-06)4 5.2.1.4.2 Procedure . 19g35.2.1.5
15、 Test requirements 20g35.2.2 Blocking and spurious response - control channels 21g35.2.2.1 Definition and applicability . 21g35.2.2.2 Conformance requirement. 21g35.2.2.3 Test purpose 22g35.2.2.4 Method of test . 22g35.2.2.4.1 Initial conditions 22g35.2.2.4.2 Procedure . 22g35.2.2.5 Test requirement
16、s 23g35.3 Blocking with Broadband interfering Signals 24g35.3.1 Blocking and spurious response - speech channels . 24g35.3.1.1 Definition and applicability . 24g35.3.1.2 Conformance requirement. 24g35.3.1.3 Test purpose 24g35.3.1.4 Method of test . 25g35.3.1.4.1 Initial conditions 25g35.3.1.4.2 Proc
17、edure . 25g35.3.1.5 Test requirements 25g35.3.2 Blocking and spurious response - control channels 25g35.3.2.1 Definition and applicability . 25g35.3.2.2 Conformance requirement. 26g35.3.2.3 Test purpose 26g35.3.2.4 Method of test . 26g35.3.2.4.1 Initial conditions 26g35.3.2.4.2 Procedure . 26g35.3.2
18、.5 Test requirements 26g36 Other requirements . 27g3Annex A (informative): Bibliography . 28g3History 29g3ETSI ETSI TS 102 933-2 V2.1.1 (2015-06)5 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining t
19、o these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. L
20、atest updates are available on the ETSI Web server (http:/ipr.etsi.org). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI
21、Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI Technical Committee Railway Telecommunications (RT). The present document is part 2 of a multi-part deliverable covering the Railway Telecommunicat
22、ions (RT); GSM-R improved receiver parameters, as identified below: Part 1: “Requirements for radio reception“; Part 2: “Radio conformance testing“. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“
23、 are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 102 933-2 V2.1.1 (2015-06)6 1 Scope The present document describe
24、s the technical characteristics and methods of testing the improved receiver performance for professional mobile stations 8 Watt (cab radio and EDOR) and 2 Watt professional small mobile station (GPH, OPH and OPS), for the Pan European digital cellular communications system and Personal Communicatio
25、n Systems (PCS) operating in the 900 MHz band (GSM 900), standardized by ETSI Special Mobile Group (SMG). The present document covers the requirements for testing the improved GSM-R receiver in order to provide sufficient performance for mobile equipment. It does not necessarily include all the char
26、acteristics which may be required by a user or subscriber, nor does it necessarily represent the optimum performance achievable. The present document is part of the GSM-series of technical specifications. The present document neither replaces any of the other GSM technical specifications or GSM rela
27、ted ETSs or ENs, nor is it created to provide full understanding of (or parts of) the GSM 900 system. The present document lists the additional test procedures, and provides the methods of test for testing a professional MS for conformance to the GSM standard. For a full description of the system, r
28、eference are made to all the GSM technical specifications or GSM related ETSs or ENs. Clause 2 provides a complete list of the GSM technical specifications, GSM related ETSs, ENs, and ETRs, on which this conformance test specifications is based. The present document applies to the unit which include
29、s the hardware to establish a connection across the radio interface. 2 References 2.1 Normative references References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-spec
30、ific references, the latest version of the reference document (including any amendments) applies. Referenced documents which are not found to be publicly available in the expected location might be found at http:/docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were vali
31、d at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents are necessary for the application of the present document. 1 ETSI TS 100 607-1: “Digital cellular telecommunications system (Phase 2+); Mobile Station (MS) conformance specification; Part
32、 1: Conformance specification (3GPP 11.10-1 Release 1999)“. 2 ETSI TS 100 910: “Digital cellular telecommunications system (Phase 2+); Radio transmission and reception (3GPP TS 05.05 Release 1999)“. 3 ETSI TS 102 933-1: “Railway Telecommunications (RT); GSM-R improved receiver parameters; Part 1: Re
33、quirements for radio reception“. 4 ETSI TS 136 141: “LTE; Evolved Universal Terrestrial Radio Access (E-UTRA); Base Station (BS) conformance testing (3GPP TS 36.141)“. 2.2 Informative references References are either specific (identified by date of publication and/or edition number or version number
34、) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the reference document (including any amendments) applies. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee th
35、eir long term validity. ETSI ETSI TS 102 933-2 V2.1.1 (2015-06)7 The following referenced documents are not necessary for the application of the present document but they assist the user with regard to a particular subject area. i.1 ETSI TR 101 748: “Digital cellular telecommunications system (Phase
36、 2+) (GSM); Abbreviations and acronyms (GSM 01.04)“. i.2 ETSI EN 300 607-1 (V8.1.1): “Digital cellular telecommunications system (Phase 2+) (GSM); Mobile Station (MS) conformance specification; Part 1: Conformance specification (GSM 11.10-1 version 8.1.1 Release 1999)“. 3 Abbreviations For the purpo
37、ses of the present document, the abbreviations given in ETSI TR 101 748 i.1 and the following apply: EDOR ETCS Data Only Radio ETCS European Train Control System GPH General Purpose Handheld OPH Operational Purpose Handheld OPS Operational Purpose Handheld for Shunting 4 Receiver characteristics for
38、 8 Watt mobiles 4.0 General In this clause receiver measurements are described, for professional mobile stations equipped with a permanent antenna connector only. Wherever in this clause, for FACCH tests, the SS is required to send a Layer 3 message not requiring a Layer 3 response from the professi
39、onal MS the message can be a TEST INTERFACE message or a STATUS message, possibly with an unknown Protocol Discriminator. Testing philosophy Certain assumptions concerning the functional mechanisms of GSM receivers have been made in order to define tests that will verify the receiver performance wit
40、hout excessive redundancy and excessive test times. The receiver functions can be divided into: Analogue RF and IF stages that are affected by input levels, temperature and power supply levels. Demodulator that is affected by input levels and interfering signals. Decoders that are affected by the di
41、fferent logical channels and input levels. The tests are designed to stress each of these blocks with a minimum of redundancy. 4.1 Reference sensitivity The reference sensitivity is the signal level at the professional MS receiver input at which a certain BER and FER shall be achieved. The requireme
42、nts and this test apply to professional MS supporting speech. For tests using ARFCN ranges values in the table 1 shall be used. ETSI ETSI TS 102 933-2 V2.1.1 (2015-06)8 Table 1: ARFCN Ranges Term Band Low ARFCN range Mid ARFCN range High ARFCN range E-GSM 900 975 to 980 60 to 65 120 to 124 R-GSM 900
43、 955 to 960 (R-GSM) and 975 to 980 (E-GSM) 60 to 65 120 to 124 ER-GSM 900 940 to 945 (ER-GSM) 975 to 980 (E-GSM) 60 to 65 120 to 124 4.2 Blocking with CW interfering Signals 4.2.1 Blocking and spurious response - speech channels 4.2.1.1 Definition and applicability Blocking is a measure of the abili
44、ty of the receiver to receive a modulated wanted input signal in the presence of an unwanted input signal, on frequencies other than those of the spurious responses or the adjacent channels, without exceeding a given degradation. The requirements and this test apply to professional MS supporting spe
45、ech. 4.2.1.2 Conformance requirement 1) The blocking characteristics of the receiver are specified separately for in-band and out-of-band performance and shall be as identified in ETSI TS 102 933-1 3, clause 7.1. The reference sensitivity performance as specified in table 1 of ETSI TS 100 910 2 shal
46、l be met when the following signals are simultaneously input to the receiver: - a useful signal at frequency f0, as specified in ETSI TS 102 933-1 3, clause 7.1.1; - a continuous, static sine wave signal at a level as in the table 10 of ETSI TS 102 933-1 3, clause 7.1.1 and at a frequency (f) which
47、is an integer multiple of 200 kHz; with the following exceptions, called spurious response frequencies: a) ER-GSM 900/R-GSM 900: in band, for a maximum of six occurrences (which if grouped shall not exceed three contiguous occurrences per group); b) out-of-band, for a maximum of 24 occurrences (whic
48、h if below f0and grouped shall not exceed three contiguous occurrences per group). Where the above performance shall be met when the continuous sine wave signal (f) is set to a level of -40 dBm. 2) Testing conditions shall guarantee that the noise level of their used interfering signals are below -1
49、13 dBm/200 kHz on the wanted ARFCN and its (bi) adjacent channels. 4.2.1.3 Test purpose 1) To verify that the in band blocking performance is met without exceeding the total number of allowed in band spurious responses. An allowance is made for the statistical significance of the test. 2) To verify that at selected out-of-band frequencies, the out-of-band blocking performance is met without exceeding the total number of allowed out-of-band spurious responses. An allowance is made for the statistical significance of the test. NOTE: Not all of the po
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1