ETSI TS 103 202-3-2015 Core Network and Interoperability Testing (INT) GTPv2-C Conformance Testing for S11 Interface (3GPP Release 10) Part 3 Abstract Test Suite (ATS) and partial .pdf

1、 ETSI TS 103 202-3 V1.1.1 (2015-12) Core Network and Interoperability Testing (INT); GTPv2-C Conformance Testing for S11 Interface; (3GPPTMRelease 10); Part 3: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) pro forma specification floppy3TECHNICAL

2、 SPECIFICATION ETSI ETSI TS 103 202-3 V1.1.1 (2015-12)2 Reference DTS/INT-00092-3 Keywords ATS, conformance,GTPv2-C, S11, PIXIT ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non

3、 lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of

4、the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific ne

5、twork drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the

6、 present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as aut

7、horized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2015. All rights reserved. DECTTM, P

8、LUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Associ

9、ation. ETSI ETSI TS 103 202-3 V1.1.1 (2015-12)3 Contents Intellectual Property Rights 5g3Foreword . 5g3Modal verbs terminology 5g31 Scope 6g32 References 6g32.1 Normative references . 6g32.2 Informative references 7g33 Definitions and abbreviations . 7g33.1 Definitions 7g33.2 Abbreviations . 7g34 Ab

10、stract Test Method (ATM) . 7g34.1 Introduction 7g34.2 Test architecture . 7g34.2.1 Test method 7g34.2.2 Test machine configuration. 8g34.2.2.1 Test configurations for testing the MME 8g34.2.2.2 Test configurations for testing the S-GW 9g34.2.3 Interconnection of TS and SUT 11g34.2.3.1 MME Role. 11g3

11、4.2.3.1.1 Configuration f_cf01_S11Up_MME . 11g34.2.3.1.2 Configuration f_cf02_S11Up_MME . 12g34.2.3.2 S-GW Role 13g34.2.3.2.1 Configuration f_cf01_S11Up_SGW . 13g34.2.3.2.2 Configuration f_cf02_S11Up_SGW . 14g34.2.3.2.3 Configuration f_cf03_S11Up_SGW . 14g35 ATS conventions 15g35.1 Introduction 15g3

12、5.2 Testing conventions 15g35.2.1 Test cases Preamble and Postamble 15g35.3 Naming conventions . 15g35.3.1 General guidelines 15g35.3.2 Test case grouping 16g35.3.3 Test case identifiers 16g3Annex A (normative): DIAMETER S11 Partial PIXIT pro forma . 17g3A.1 The right to copy 17g3A.2 Identification

13、summary. 17g3A.3 ATS summary 17g3A.4 Test laboratory 17g3A.5 Client identification 17g3A.6 SUT 18g3A.7 Protocol layer information 18g3A.7.1 Protocol identification 18g3A.8 PIXIT items 18g3A.8.1 S11 related PIXIT items . 18g3ETSI ETSI TS 103 202-3 V1.1.1 (2015-12)4 Annex B (normative): GTPv2-C on S11

14、 interface Abstract Test Suite (ATS) 20g3Annex C (informative): GTPv2-C on S11 interface Test Purpose Language (TPLAN) descriptions . 21g3History 22g3ETSI ETSI TS 103 202-3 V1.1.1 (2015-12)5 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been de

15、clared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, whi

16、ch is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/ipr.etsi.org). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in

17、ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI Technical Committee Core Network and Interoperability Testing (INT). The present document is part 3 of

18、a multi-part deliverable. Full details of the entire series can be found in part 1 9. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI D

19、rafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 103 202-3 V1.1.1 (2015-12)6 1 Scope The present document specifies the Abstract Test Suite (ATS) and partial Protocol Implementa

20、tion eXtra Information for Testing (PIXIT) pro forma for the test specifications for GTPv2-C protocol on the S11 interface as specified in ETSI TS 129 274 1 in compliance with the relevant requirements and in accordance with the relevant guidance given in ISO/IEC 9646-7 5 and ETSI ETS 300 406 6. The

21、 test notation used in the ATS is TTCN-3 (see ETSI ES 201 873-1 7). The following test specification and design considerations can be found in the body of the present document: the overall test suite structure; the testing architecture; the test methods and port definitions; the test configurations;

22、 TTCN styles and conventions; the partial PIXIT pro forma; the modules containing the TTCN-3 ATS. Annex A provides the Partial Implementation Extra Information for Testing (PIXIT) Pro forma. Annex B provides the Abstract Test Suite (ATS) part of the ATS. 2 References 2.1 Normative references Referen

23、ces are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the reference document (including any amendments) applies. Referenced docum

24、ents which are not found to be publicly available in the expected location might be found at http:/docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents a

25、re necessary for the application of the present document. 1 ETSI TS 129 274 (V10.14.0): “Universal Mobile Telecommunications System (UMTS); LTE; 3GPP Evolved Packet System (EPS); Evolved General Packet Radio Service (GPRS) Tunnelling Protocol for Control plane (GTPv2-C); Stage 3 (3GPP TS 29.274 vers

26、ion 10.14.0 Release 10)“. 2 ETSI TS 103 202-2: “Core Network and Interoperability Testing (INT); GTPv2-C Conformance Testing for S11 Interface; (3GPP Release 10); Part 2: Test Suite Structure (TSS) and Test Purposes (TP)“. 3 ISO/IEC 9646-1: “Information technology - Open Systems Interconnection - Co

27、nformance testing methodology and framework - Part 1: General concepts“. 4 ISO/IEC 9646-6: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 6: Protocol profile test specification“. 5 ISO/IEC 9646-7: “Information technology - Open Systems I

28、nterconnection - Conformance testing methodology and framework - Part 7: Implementation Conformance Statements“. ETSI ETSI TS 103 202-3 V1.1.1 (2015-12)7 6 ETSI ETS 300 406: “Methods for testing and Specification (MTS); Protocol and profile conformance testing specifications; Standardization methodo

29、logy“. 7 ETSI ES 201 873-1: “Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 1: TTCN-3 Core Language“. 8 ETSI ES 202 553: “Methods for Testing and Specification (MTS); TPLan: A notation for expressing Test Purposes“. 9 ETSI TS 103 202-1: “Core Netwo

30、rk and Interoperability Testing (INT); GTPv2-C Conformance Testing for S11 Interface; (3GPP Release 10); Part 1: Protocol Implementation Conformance Statement (PICS)“. 2.2 Informative references References are either specific (identified by date of publication and/or edition number or version number

31、) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the reference document (including any amendments) applies. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee th

32、eir long term validity. The following referenced documents are not necessary for the application of the present document but they assist the user with regard to a particular subject area. Not applicable. 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the te

33、rms and definitions given in ISO/IEC 9646-7 5 and ETSI TS 129 274 1 apply. 3.2 Abbreviations For the purposes of the present document, the abbreviations given in ISO/IEC 9646-1 3, ISO/IEC 9646-6 4, ISO/IEC 9646-7 5 and ETSI TS 129 274 1 apply. 4 Abstract Test Method (ATM) 4.1 Introduction This claus

34、e describes the ATM used to test ETSI TS 129 274 1. 4.2 Test architecture 4.2.1 Test method The S11 interface is located between the MME and the S-GW. The test method chosen is the remote test method. Remote test method means that the test tool (the test machine + the executable test suite) shall be

35、have as an MME when the IUT is an S-GW and shall behave as an S-GW when the IUT is an MME. As the exchange between the test system and the IUT is at the GTPv2-C message level, the lower layers of the test machine shall be totally conformant with the corresponding lower layers specifications to use t

36、he remote test method. ETSI ETSI TS 103 202-3 V1.1.1 (2015-12)8 4.2.2 Test machine configuration 4.2.2.1 Test configurations for testing the MME The first MME test configuration in the figure below shows a simple test architecture with just one peer-to-peer connection between the MME (SUT) and the S

37、-GW (TS) where no further interfaces are taken into account. Figure 1: Test configuration CF_MME The second MME test configuration in the figure below assumes a more complex test architecture where the actions at the S1-MME interface towards the eNB are needed to trigger message exchanges at the S11

38、 interface. Figure 2: Test configuration CF_MME_ENB The third MME test configuration in the figure below assumes an even more complex test architecture where the actions at two S1-MME interfaces towards the eNB are needed to trigger message exchanges at the S11 interface. TS SUT S11 MME S-GW TS SUT

39、S11 MME S-GW TS eNB S1 ETSI ETSI TS 103 202-3 V1.1.1 (2015-12)9 NOTE: The S1 protocol functionality may not be fully modelled in the TTCN-3 code. Figure 3: Test configuration CF_MME_2ENB 4.2.2.2 Test configurations for testing the S-GW The first S-GW test configuration in the figure below shows a si

40、mple test architecture with just one peer-to-peer connection between the MME (TS) and the S-GW (SUT) where no further interfaces are taken into account. Figure 4: Test configuration CF_SGW The second S-GW test configuration in the figure below assumes a more complex test architecture where the actio

41、ns at the S5 interfaces towards the P-GW are needed to trigger message exchanges at the S11 interface. NOTE: The S5 protocol functionality may not be fully modelled in the TTCN-3 code. Figure 5: Test configuration CF_SGW_PGW SUT TS S11 MME S-GW TS eNB S1 TS SUT S11 S-GW MME TS SUT S11 S-GW MME TS P-

42、GW S5 eNB S1 ETSI ETSI TS 103 202-3 V1.1.1 (2015-12)10 The third S-GW test configuration in the figure below assumes an even more complex test architecture where the actions at the S4 and S5 interfaces towards the SGSN and the P-GW are needed to trigger message exchanges at the S11 interface. Figure

43、 6: Test configuration CF_SGW_PGW_SGSN The fourth S-GW test configuration in the figure below assumes a more complex test architecture where the actions at the S4 interface towards the SGSN are needed to trigger message exchanges at the S11 interface. NOTE 1: The S4 protocol functionality may not be

44、 fully modelled in the TTCN-3 code. NOTE 2: The S5 protocol functionality may not be fully modelled in the TTCN-3 code. Figure 7: Test configuration CF_SGW_SGSN TS SUT S11 S-GW MME TS P-GW S5 TS SUT S11 S-GW MME TS SGSN S4 SGSN S4 ETSI ETSI TS 103 202-3 V1.1.1 (2015-12)11 4.2.3 Interconnection of TS

45、 and SUT 4.2.3.1 MME Role 4.2.3.1.1 Configuration f_cf01_S11Up_MME Figure 8 shows the interconnection of TS and SUT in terms of GTPv2-C message flows. GTPv2-C messages are transferred over the s11Port port. s11PortTSport: s11Portg94g882g39g116g94g104g100g68g68g28g373g258g393g894g3g448g272g890g400g33

46、6g449g855g400g1005g1005g87g381g396g410g853g3g400g455g400g410g286g373g855g400g1005g1005g87g381g396g410g895g854g3Figure 8: Interconnection for MME role ETSI ETSI TS 103 202-3 V1.1.1 (2015-12)12 4.2.3.1.2 Configuration f_cf02_S11Up_MME Figure 9 shows the interconnection of TS and SUT in terms of GTPv2-

47、C message flows. GTPv2-C messages are transferred over the s11Port port. GTPv2-C messages transferred over the s5Port port are used for message triggering. s11PortTSport: s11Portg94g882g39g116g94g104g100g68g68g28g373g258g393g894g3g448g272g890g400g336g449g855g400g1005g1005g87g381g396g410g853g3g400g45

48、5g400g410g286g373g855g400g1005g1005g87g381g396g410g895g854g373g258g393g894g3g448g272g890g400g336g449g855g400g1005g68g373g286g87g381g396g410g853g3g400g455g400g410g286g373g855g400g1005g68g373g286g87g381g396g410g895g854port: s1MmePortg286g69g381g282g286g17 s1MmePortFigure 9: Interconnection for MME rol

49、e ETSI ETSI TS 103 202-3 V1.1.1 (2015-12)13 4.2.3.2 S-GW Role 4.2.3.2.1 Configuration f_cf01_S11Up_SGW Figure 10 shows the interconnection of TS and SUT in terms of GTPv2-C message flows. GTPv2-C messages are transferred over the s11Port port. s11PortTSport: s11Portg68g68g28g94g104g100g94g882g39g116g373g258g393g894g3g448g272g890g373g373g286g855g400g1005g1005g87g381g396g410g853g3g400g455g400g410g286g373g855g400g1005g1005g87g381g396g410g895g854g3Figure 10: Interconnection for S-GW role ETSI ETSI TS 103 202-3 V1.1.