ETSI TS 103 243-2-2014 Integrated broadband cable telecommunication networks (CABLE) Testing Conformance test specifications for 6rd technology Part 2 Test Suite Structure and Test_1.pdf

1、 ETSI TS 103 243-2 V1.1.1 (2014-12) Integrated broadband cable telecommunication networks (CABLE); Testing; Conformance test specifications for 6rd technology; Part 2: Test Suite Structure and Test Purposes (TSS Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“

2、, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/ipr.etsi.org). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not reference

3、d in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI Technical Committee Integrated broadband cable telecommunication networks (CABLE). The present doc

4、ument produced for the transition technologies accommodates an urgent need in the industry to define requirements that enable seamless transition of Cable Networks to IPv6. Considering the depletion of IPv4 addresses, transition to IPv6 is required in order to enable continued growth of the customer

5、 base connected to Cable Networks and ensure service continuity for existing and new customers. High-quality connectivity to all kinds of IP-based services and networks is essential in todays business and private life. A plethora of transition technologies have been proposed in IETF, other standardi

6、zation organizations and by manufacturers of IP technology to allow coexistence of IPv4 and IPv6 hosts, access and core networks as well as services. Each of these technology options is specified, implemented and deployed in various forms and stages. The present document is based on the requirements

7、 of ETSI TS 101 569-1 1. The present document is part 2 of a multi-part deliverable covering the conformance tests specification for 6rd technology. Part 1: “Protocol Implementation Conformance Statement (PICS) proforma“; Part 2: “Test Suite Structure and Test Purposes (TSS Part 3: “Abstract Test Su

8、ite (ATS) and Protocol Implementation eXtra Information for Testing (PIXIT)“. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “may not“, “need“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of

9、 the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 103 243-2 V1.1.1 (2014-12)51 Scope The present document provides the Test Suite Structure and Test Purposes (TSS Cabl

10、e Network Transition to IPv6 Part 1: IPv6 Transition Requirements“. 2.2 Informative references The following referenced documents are not necessary for the application of the present document but they assist the user with regard to a particular subject area. i.4 ISO/IEC 9646-1 (1994): “Information t

11、echnology - Open Systems Interconnection - Conformance testing methodology and framework - Part 1: General concepts“. i.5 ISO/IEC 9646-2 (1994): “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 2: Abstract Test Suite specification“. i.6 ET

12、SI ETS 300 406 (1995): “Methods for testing and Specification (MTS); Protocol and profile conformance testing specifications; Standardization methodology“. 3 Abbreviations For the purposes of the present document, the following abbreviations apply: 6rd IPv6 Rapid Deployment ATS Abstract Test Suite B

13、4 (6rd) Basic Bridging BroadBand element BR Border Relay CPE Customer Premises Equipment DF Dont Fragment flag (in IPv4 header) GRT Global Routing Table GW GateWay HTML HyperText Markup Language ETSI ETSI TS 103 243-2 V1.1.1 (2014-12)6IP Internet Protocol IPv4 IP version 4 IPv6 IP version 6 IUT Impl

14、ementation Under Test MSS (TCP) Maximum Segment Size MTS Methods for Testing and Specification MTU Maximum Transmission Unit NAT Network Address Translation / Network Address Translator PICS Protocol Implementation Conformance Statement TCP Transmission Control Protocol VRF Virtual Routing and Forwa

15、rding 4 Test Suite Structure The identifier of the TP is built according to table 1 as recommended in the MTS methodologies. Table 1: TP naming convention for 6rd TP/ = root 6RD IPv6 encapsulated within IPv4 IPv6 rapid deployment = group BR Border Router CPE Customer Premise Equipment = sub-group BF

16、 Basic Function AA Anycast Addressing AW Address Withdrawal FRAG Fragmentation MSSC Maximum Segment Size Clamping TI Tunnel Identifiers NT NAT Timers SC Session Control RT Routing Tables GWA Gateway Assignment = type of testing BV Valid Behaviour tests = sequential number 01 to 99 NOTE: A sub-group

17、may not apply for all groups. ETSI ETSI TS 103 243-2 V1.1.1 (2014-12)75 Test Purposes (TP) This clause proposes a TP proforma which is used in the present document. The fields of this proforma as used in the present document are explained in table 2. Table 2: TP proforma field description TP Header

18、TP ID The TP ID is a unique identifier according to the TP naming conventions in table 1 Test objective Short description of test purpose objective according to the requirements from the base standard. Reference The reference indicates the clauses of the reference standard specifications in which th

19、e conformance requirement is expressed. PICS selection Reference to the PICS statement involved for selection of the TP. Contains a Boolean expression. May contain PICS acronyms specified in table. This section is only used in case an optional or conditional behaviour needs to be selected. Mandatory

20、 behaviour is not identified here. TP Behaviour Initial conditions (optional) The initial conditions define in which initial state the IUT has to be to apply the actual TP. In the corresponding “Test Case“ (TC), when the execution of the initial condition does not succeed, it leads to the assignment

21、 of an Inconclusive verdict. Expected behaviour (TP body) Definition of the events, which are parts of the TP objective, and the IUT are expected to perform in order to conform to the base specification. In the corresponding TC,“ Pass“ or “Fail“ verdicts can be assigned there. 5.1 TPs for CPE 5.1.1

22、Gateway Assignment TP Id TP/6RD/CPE/GWA/BV/01 Test objective Check that IUT sends a DHCPv4 Request to the DHCPv4 Server after initialization Reference 1: clause 6.8.9.3 Feature: 6RD Configuration Initial conditions with the IUT is properly provisioned the interfaces are connected Cable Network Handb

23、ook“, June 2010. ETSI ES 201 488 (all parts) (V1.2.2): “Data-Over-Cable Service Interface Specifications Radio Frequency Interface Specification“. ETSI ES 202 488 (all parts) (V1.1.1): “Access and Terminals (AT); Second Generation Transmission Systems for Interactive Cable Television Services - IP Cable Modems“. IETF RFC 5969: “IPv6 Rapid Deployment on IPv4 infrastructures - 6rd - Protocol Specification“. IETF RFC 5569: “IPv6 Rapid Deployment on IPv4 infrastructures - 6rd“. ETSI ETSI TS 103 243-2 V1.1.1 (2014-12)18History Document history V1.1.1 December 2014 Publication