ETSI TS 103 246-4-2016 Satellite Earth Stations and Systems (SES) GNSS based location systems Part 4 Requirements for location data exchange protocols (V1 1 1)《卫星地面站和系统(SES) 基于定位系统.pdf

1、 ETSI TS 103 246-4 V1.1.1 (2016-01) Satellite Earth Stations and Systems (SES); GNSS based location systems; Part 4: Requirements for location data exchange protocols TECHNICAL SPECIFICATION ETSI ETSI TS 103 246-4 V1.1.1 (2016-01)2 Reference DTS/SES-00348 Keywords GNSS, location, MSS, navigation, pe

2、rformance, receiver, satellite, system, terminal ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notic

3、e The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorizat

4、ion of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aw

5、are that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: h

6、ttps:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not

7、 be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2016. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the

8、benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 103 246-4 V1.1.1 (2016-01)3 Contents Intellectual Property

9、Rights 5g3Foreword . 5g3Modal verbs terminology 5g3Introduction 5g31 Scope 6g32 References 6g32.1 Normative references . 6g32.2 Informative references 6g33 Definitions and abbreviations . 7g33.1 Definitions 7g33.2 Abbreviations . 7g34 Data Exchange Requirements 8g34.1 Context . 8g34.2 Protocol Choic

10、e and Compatibility 9g34.2.1 LSEP (MLP) . 9g34.2.2 LSIP (LPPe) 10g34.2.2.1 General 10g34.2.2.2 LSIP Data Exchange Requirements 10g34.2.3 LSEP/MLP and LSIP/LPPe Terminology 12g35 LSEP Requirements . 13g35.1 LSEP Services and Procedures . 13g35.2 Extension of MLP for LSEP. 14g35.3 LSEP Data Exchange M

11、essage Definition . 14g36 LSIP Requirements 15g36.1 LSIP Services and Procedures 15g36.2 Extension of LPPe/LPP for LSIP . 15g36.3 LSIP Data Exchange Message Definition 16g36.3.1 General 16g36.3.2 IE Extensions of LPP/LPPe for LSIP . 16g36.3.2.1 Message Extensions 16g36.3.2.2 LPPe data type imports .

12、 16g36.3.3 LSIP Extension Messages . 17g36.3.3.1 Request Assistance Data . 17g36.3.3.2 Provide Assistance Data 17g36.3.3.3 Request Location Information . 17g36.3.3.4 Provide Location Information . 18g37 LSEP Element Definitions . 18g37.1 Overview 18g37.2 LSEP Child Elements . 18g37.2.1 Identity elem

13、ents . 18g37.2.2 Location elements . 18g37.2.3 Quality of Position elements . 20g37.3 LSEP Sub-Child Elements . 21g37.3.1 accel 21g37.3.2 accel_conf_lev 21g37.3.3 accel_unc 21g37.3.4 accel_req. 21g37.3.5 auth_flag . 22g37.3.6 auth_req 22g37.3.7 conf_class . 22g37.3.8 emidata_req. 22g37.3.9 h_acc . 2

14、3g3ETSI ETSI TS 103 246-4 V1.1.1 (2016-01)4 7.3.10 h_acc_not_met 23g37.3.11 h_conf_lev 23g37.3.12 h_int_alert . 23g37.3.13 head_conf_lev . 23g37.3.14 head_req 24g37.3.15 head_unc . 24g37.3.16 LSEP-msids 24g37.3.17 v_acc . 24g37.3.18 v_acc_not_met 24g37.3.19 v_conf_lev 25g37.3.20 v_unc 25g37.3.21 v_r

15、eq . 25g37.3.22 vel_acc 25g37.3.23 vel_acc_not_met . 25g37.3.24 vel_conf_lev . 26g37.3.25 vel_unc 26g37.3.26 vel_req 26g38 LSIP Information Elements 26g38.1 LSIP Common Positioning IEs 26g38.1.1 General 26g38.1.2 LSIP-CommonIEsRequestLocationInformation . 26g38.1.3 LSIP-CommonIEsProvideLocationInfor

16、mation . 28g38.2 LSIP Common Low-Level IEs . 30g38.2.1 General 30g38.2.2 LSIP-ConfidenceLevels 30g38.2.3 LSIP-ErrorMeasurements . 31g38.2.4 LSIP-QosIndicators 31g38.3 Specific Positioning Method IEs 31g38.3.1 General 31g38.3.2 GNSS Positioning . 32g38.3.2.1 LSIP-GNSS-RequestLocationInformation 32g38

17、.3.2.2 LSIP-GNSS-ProvideLocationInformation 32g38.3.3 Odometer positioning . 32g38.3.3.1 LSIP-Odometer-RequestAssistanceData . 32g38.3.3.2 LSIP-Odometer-ProvideAssistanceData . 33g38.3.3.3 LSIP-Odometer-RequestLocationInformation 33g38.3.3.4 LSIP-Odometer-ProvideLocationInformation 33g38.3.4 Beam Fo

18、rming Network Positioning 34g38.3.4.1 LSIP-BFN-RequestLocationInformation 34g38.3.4.2 LSIP-BFN-ProvideLocationInformation. 34g38.3.4.3 LSIP-JammerSignal 34g38.3.5 Mapping Positioning . 35g3Annex A (informative): Rationale for LSEP/MLP and LSIP/LPPe 36g3A.1 Basis for LSEP/MLP 36g3A.2 Basis for LSIP/L

19、PPe . 36g3A.3 LSIP Implementation Cases . 36g3A.4 LSIP Procedure examples for GBLS Interface 10 . 38g3A.4.1 “Mobile-centric“ Assistance data provisioning 38g3A.4.2 “Network-centric“ Location Information provisioning 39g3Annex B (informative): Bibliography . 40g3History 41g3ETSI ETSI TS 103 246-4 V1.

20、1.1 (2016-01)5 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intell

21、ectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, includ

22、ing IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has

23、 been produced by ETSI Technical Committee Satellite Earth Stations and Systems (SES). The present document is part 4 of a multi-part deliverable covering GNSS-based Location Systems (GBLS), as identified below: Part 1: Functional requirements; Part 2: Reference Architecture; Part 3: Performance req

24、uirements; Part 4: Requirements for location data exchange protocols; Part 5: Performance Test Specification. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in

25、clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. Introduction The increasing proliferation of location-based services is based on several trends in user applications

26、and devices; these include notably the widespread adoption of multi-functional smart-phones, etc., and the wider adoption of tracking devices (e.g. in transport). This need for new and innovative location-based services is generating a need for increasingly complex location systems. These systems ar

27、e designed to deliver location-related information for one or more targets to user applications. The wide spectrum of technical features identified in ETSI TR 103 183 i.1 calls for a new and broader concept for location systems, taking into account hybrid solutions in which GNSS technologies are com

28、plemented with other technology sensors to improve robustness and the performance. ETSI ETSI TS 103 246-4 V1.1.1 (2016-01)6 1 Scope The present document defines the requirements for data elements that may need to be exchanged within the GBLS and externally to applications using the GBLS. The present

29、 document also specifies data exchange models for these data elements which may form the basis of protocols (or for modification of protocols) and which may be used for the exchange of location-related data within the GNSS-based Location System (GBLS), as well as between the GBLS and external applic

30、ations. In particular, the present document defines the procedures and messages associated with these data exchange models The GBLS data exchange models are defined to be independent of their underlying transport mechanisms. Nevertheless, on certain GBLS interfaces, transport protocols are recommend

31、ed. 2 References 2.1 Normative references References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the reference document (in

32、cluding any amendments) applies. Referenced documents which are not found to be publicly available in the expected location might be found at http:/docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long te

33、rm validity. The following referenced documents are necessary for the application of the present document. 1 ETSI TS 103 246-1: “Satellite Earth Stations and Systems (SES); GNSS based location systems; Part 1: Functional requirements“. 2 ETSI TS 103 246-2: “Satellite Earth Stations and Systems (SES)

34、; GNSS based location systems; Part 2: Reference Architecture“. 3 ETSI TS 103 246-3: “Satellite Earth Stations and Systems (SES); GNSS based location systems; Part 3: Performance requirements“. 4 OMA-TS-MLP-V3.5: “Mobile Location Protocol“. 5 OMA-TS-LPPe-V2.0: “LPP Extensions Specification“. 6 ETSI

35、TS 136 355: “LTE; Evolved Universal Terrestrial Radio Access (E-UTRA); LTE Positioning Protocol (LPP) (3GPP TS 36.355)“. 2.2 Informative references References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, onl

36、y the cited version applies. For non-specific references, the latest version of the reference document (including any amendments) applies. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following reference

37、d documents are not necessary for the application of the present document but they assist the user with regard to a particular subject area. i.1 ETSI TR 103 183: “Satellite Earth Stations and Systems (SES); Global Navigation Satellite Systems (GNSS) based applications and standardisation needs“. i.2

38、 OMA-TS-ULP-V3: “User Plane Location Protocol“. ETSI ETSI TS 103 246-4 V1.1.1 (2016-01)7 i.3 OMA-AD-LOCSIP-V1: “Location in SIP/IP core Architecture“. i.4 ETSI ES 201 915: “Open Service Access (OSA); Application Programming Interface (API)“. i.5 3GPP2 C.S0022-B: “Position Determination Service for c

39、dma2000 Spread Spectrum Systems“. i.6 ETSI TS 125 331: “Universal Mobile Telecommunications System (UMTS); Radio Resource Control (RRC); Protocol specification (3GPP TS 25.331)“. i.7 ETSI TS 144 031: “Digital cellular telecommunications system (Phase 2+); Location Services (LCS); Mobile Station (MS)

40、 - Serving Mobile Location Centre (SMLC) Radio Resource LCS Protocol (RRLP) (3GPP TS 44.031)“. 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in ETSI TS 103 246-1 1 apply. 3.2 Abbreviations For the purposes of the present doc

41、ument, the following abbreviations apply: 3GPP 3rdGeneration Partnership Project API Application Programming Interface ASN Abstract Syntax Notation BFN Beam Forming NetworkCL Confidence Level DoA Direction of ArrivalDTD Document Type Definition ECID Enhanced Cell ID EMI ElectroMagnetic Interference

42、EOTD Enhanced Observed Time Difference EPDU Extension Protocol Data Unit EPDU External Protocol Data Unit E-SMLC Enhanced Mobile Location Centre FFS For Further Study GBLS GNSS Based Location System GGTO GPS-Galileo Time Offset GNSS Global Navigation Satellite Systems GPS Global Positioning System G

43、SM Global System for Mobile Communications HTTP HyperText Transfer Protocol HTTPS HTTP Secure IE Information Element IMSI International Mobile Station Identifier INS Inertial Navigation Sensor LCS Location Services LOCSIP LOCation in SIP LPP LTE Positioning Protocol LPPe LTE Positioning Protocol Ext

44、ensions LSEP Location System External Protocol LSIP Location System Internal Protocol LTE Long-Term Evolution MLP Mobile Location Protocol MLS Mobile Location System MS Mobile Station MSID Mobile Station Identifier OMA Open Mobile Alliance OTDOA Observed Time Difference of Arrival PVT Position Veloc

45、ity Time ETSI ETSI TS 103 246-4 V1.1.1 (2016-01)8 QoS Quality of Service RF Radio Frequency RRC Radio Resource Control RRLP Radio Resource Location services (LCS) Protocol RT Real-Time SET SUPL Enabled Terminal SIP Session Initiation Protocol SLP Server Location Provider SMLC Serving Mobile Location

46、 Centre SOAP Simple Object Access Protocol SRN Short Range Node SSL Secure Socket LayerTCP/IP Transmission Control Protocol over Internet Protocol TLS Transport Layer Security UE User Equipment ULP User-plane Location Protocol UMTS Universal Mobile Telecommunications System UTC Coordinated Universal

47、 Time UTRA UMTS Terrestrial Radio Access WLAN Wireless Local Area Network XML Extensible Markup Language 4 Data Exchange Requirements 4.1 Context The GBLS data that shall or may be exchanged is defined in ETSI TS 103 246-2 2 in general terms for two main cases: 1) externally to applications using th

48、e GBLS; and 2) internally between modules of the GBLS. The specific requirements for this data are defined further in clauses 5 and 6. In addition, data exchange models are defined herein as a basis for protocols that may be used to transfer the GBLS data. Figure 4.1 shows these defined protocol mod

49、els and their relevant interfaces applied to the GNSS-based Location System (GBLS) and its functional entities as defined in ETSI TS 103 246-2 2, within an end-to-end system. NOTE: Throughout the present document, the word “protocol“ is used for brevity, when defining a GBLS “data exchange model“. The specifications herein are of data exchange models that may form the basis of protocols. ETSI ETSI TS 103 246-4 V1.1.1 (2016-01)9 Figure 4.1: Use of LSEP and LSIP in the GBLS architecture The protocols defined are: LSEP (Location System Externa