ETSI TS 103 253-2016 Methods for Testing and Specification (MTS) TTCN-3 Conformance Test Suite for use of XML schema Implementation Conformance Statement (V1 2 1)《测试和规范方法(MTS) 使用XM.pdf

1、 ETSI TS 103 253 V1.2.1 (2016-04) Methods for Testing and Specification (MTS); TTCN-3 Conformance Test Suite for use of XML schema; Implementation Conformance Statement TECHNICAL SPECIFICATION ETSI ETSI TS 103 253 V1.2.1 (2016-04)2 Reference RTS/MTS-103253ed121 Keywords conformance, ICS, testing, TT

2、CN, XML ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded

3、from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or p

4、erceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to r

5、evision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/Co

6、mmiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the writte

7、n authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2016. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM

8、and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 103 253 V1.2.1 (2016-04)3 Contents Intellectual Property Rights 5g3Foreword . 5g3Modal ver

9、bs terminology 5g31 Scope 6g32 References 6g32.1 Normative references . 6g32.2 Informative references 6g33 Definitions and abbreviations . 7g33.1 Definitions 7g33.2 Abbreviations . 7g34 Conformance requirement concerning ICS 8g3Annex A (normative): TTCN-3 conformance ICS pro forma 9g3A.0 The right t

10、o copy 9g3A.1 Instructions for completing the ICS pro forma. 9g3A.1.1 Other information . 9g3A.1.2 Purposes and structure 9g3A.1.3 Conventions 9g3A.2 Identification of the implementation 10g3A.2.0 General Requirements 10g3A.2.1 Date of the statement 10g3A.2.2 Implementation under Test (IUT) identifi

11、cation 10g3A.2.3 System under Test (SUT) identification . 11g3A.2.4 Product supplier 11g3A.2.5 Client 11g3A.2.6 ICS contact person 11g3A.3 ICS pro forma tables. 11g3A.3.1 Global statement of conformance . 11g3A.3.2 Mapping XML Schemas 11g3A.3.3 Namespaces 12g3A.3.4 Includes 12g3A.3.5 Imports . 12g3A

12、.3.6 Attributes of the XSD schema element 13g3A.3.7 Name conversion rules . 13g3A.3.8 Order of the mapping . 14g3A.3.9 Built-in data types 14g3A.3.10 Length 15g3A.3.11 Enumeration . 15g3A.3.12 MinInclusive . 16g3A.3.13 MaxInclusive 16g3A.3.14 MinExclusive . 17g3A.3.15 MaxExclusive . 17g3A.3.16 Total

13、 digits 17g3A.3.17 Fraction digits . 18g3A.3.18 Not specifically mapped facets . 18g3A.3.19 String 18g3A.3.20 Name 18g3A.3.21 Any URI . 18g3A.3.22 Integer 18g3A.3.23 Positive integer . 19g3A.3.24 Non-positive integer . 19g3A.3.25 Negative integer . 19g3ETSI ETSI TS 103 253 V1.2.1 (2016-04)4 A.3.26 N

14、on-negative integer 19g3A.3.27 Long . 19g3A.3.28 Unsigned long 20g3A.3.29 Int . 20g3A.3.30 Unsigned int . 20g3A.3.31 Short . 20g3A.3.32 Unsigned Short . 20g3A.3.33 Byte 21g3A.3.34 Unsigned byte . 21g3A.3.35 Decimal 21g3A.3.36 Float 21g3A.3.37 Double 21g3A.3.38 Date and time . 22g3A.3.39 Date 23g3A.3

15、.40 Gregorian year and month 23g3A.3.41 Gregorian year 24g3A.3.42 Boolean type . 24g3A.3.43 AnyType and anySimpleType types. 25g3A.3.44 Id 25g3A.3.45 MinOccurs and maxOccurs 25g3A.3.46 Default and Fixed . 26g3A.3.47 Form . 27g3A.3.48 Type 28g3A.3.49 Use 28g3A.3.50 Final 29g3A.3.51 Element component

16、29g3A.3.52 Attribute element definitions 29g3A.3.53 Attribute group definitions . 29g3A.3.54 Derivation by restriction . 30g3A.3.55 Derivation by list 30g3A.3.56 Derivation by union 30g3A.3.57 Extending simple content . 31g3A.3.58 Restricting simple content 31g3A.3.59 Complex content derived by exte

17、nsion 31g3A.3.60 Complex content derived by restriction 32g3A.3.61 Referencing group components 33g3A.3.62 All content 34g3A.3.63 Choice content 34g3A.3.64 Choice with nested elements 34g3A.3.65 Choice with nested group . 34g3A.3.66 Choice with nested choice 35g3A.3.67 Choice with nested sequence 35

18、g3A.3.68 Choice with nested any . 35g3A.3.69 Sequence with nested element content . 36g3A.3.70 Sequence with nested group content 36g3A.3.71 Sequence with nested choice content . 36g3A.3.72 Sequence with nested sequence content . 37g3A.3.73 Sequence with nested any content 37g3A.3.74 Effect of the m

19、inOccurs and maxOccurs attributes on the mapping 38g3A.3.75 Attribute definitions, attribute and attributeGroup references 39g3A.3.76 Mixed content . 39g3A.3.77 The any element . 39g3A.3.78 The anyAttribute element . 40g3A.3.79 Annotation 40g3A.3.80 Group components . 41g3A.3.81 Identity-constraint

20、definition schema components . 41g3A.3.82 Head elements of substitution groups . 42g3A.3.83 Annex A (normative): TTCN-3 module XSD 42g3A.4 Additional information for ICS 46g3History 47 ETSI ETSI TS 103 253 V1.2.1 (2016-04)5 Intellectual Property Rights IPRs essential or potentially essential to the

21、present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI i

22、n respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existen

23、ce of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI Technical Committee Methods for Testing and Specification (MTS). Mod

24、al verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are

25、NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 103 253 V1.2.1 (2016-04)6 1 Scope The present document provides the Implementation Conformance Statement (ICS) pro forma for the conformance test suite for using XML Schema with TTCN-3 as defined in ETSI ES 201 873-1

26、i.1. In the present document only XML related features, specified in ETSI ES 201 873-9 1 have been considered but not the core language features (see ETSI ES 201 873-1 i.1), nor tool implementation (see ETSI ES 201 873-5 i.2 and ETSI ES 201 873-6 i.3), language mapping (see ETSI ES 201 873-7 i.4 and

27、 ETSI ES 201 873-8 i.5) and language extension (see e.g. ETSI ES 202 781 i.6, ETSI ES 202 784 i.7 and ETSI ES 202 785 4) aspects. The supplier of an implementation which is claimed to conform to ETSI ES 201 873-5 i.2 is required to complete a copy of the ICS pro forma provided in the annex A of the

28、present document. 2 References 2.1 Normative references References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the referenc

29、ed document (including any amendments) applies. Referenced documents which are not found to be publicly available in the expected location might be found at http:/docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarante

30、e their long term validity. The following referenced documents are necessary for the application of the present document. 1 ETSI ES 201 873-9 (V4.6.1): “Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 9: Using XML schema with TTCN-3“. 2 ISO/IEC 9646

31、-7 (1994): “Conformance testing methodology and framework - Part 7: Implementation Conformance Statement“. 3 ISO/IEC 9646-1 (1992): “Information Technology - Open Systems Interconnection - Conformance Testing Methodology and Framework - Part 1: General concepts“. 4 ETSI ES 202 785: “Methods for Test

32、ing and Specification (MTS); The Testing and Test Control Notation version 3; TTCN-3 Language Extensions: Behaviour Types“. 2.2 Informative references References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references,

33、only the cited version applies. For non-specific references, the latest version of the referenced document (including any amendments) applies. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following refer

34、enced documents are not necessary for the application of the present document but they assist the user with regard to a particular subject area. i.1 ETSI ES 201 873-1: “Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 1: TTCN-3 Core Language“. i.2 ET

35、SI ES 201 873-5: “Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 5: TTCN-3 Runtime Interface (TRI)“. i.3 ETSI ES 201 873-6: “Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 6: TTCN-3 Control Interf

36、ace (TCI)“. ETSI ETSI TS 103 253 V1.2.1 (2016-04)7 i.4 ETSI ES 201 873-7: “Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 7: Using ASN.1 with TTCN-3“. i.5 ETSI ES 201 873-8: “Methods for Testing and Specification (MTS); The Testing and Test Control

37、 Notation version 3; Part 8: The IDL to TTCN-3 Mapping“. i.6 ETSI ES 202 781: “Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; TTCN-3 Language Extensions: Configuration and Deployment Support“. i.7 ETSI ES 202 784: “Methods for Testing and Specification

38、(MTS); The Testing and Test Control Notation version 3; TTCN-3 Language Extensions: Advanced Parameterization“. 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in ISO/IEC 9646-1 3, ISO/IEC 9646-7 2, ETSI ES 201 873-1 i.1 (TTCN

39、-3) and the following apply: Abstract Test Suite (ATS): test suite composed of abstract test cases ICS pro forma: document, in the form of a questionnaire, which when completed for an implementation or system becomes an ICS Implementation Conformance Statement (ICS): statement made by the supplier o

40、f an implementation claimed to conform to a given specification, stating which capabilities have been implemented Implementation eXtra Information for Testing (IXIT): statement made by a supplier or implementor of an IUT which contains or references all of the information related to the IUT and its

41、testing environment, which will enable the test laboratory to run an appropriate test suite against the IUT Implementation Under Test (IUT): implementation of one or more OSI protocols in an adjacent user/provider relationship, being part of a real open system which is to be studied by testing IXIT

42、pro forma: document, in the form of a questionnaire, which when completed for the IUT becomes the IXIT 3.2 Abbreviations For the purposes of the present document, the following abbreviations apply: ASCI American Standard Code for Information Interchange ATS Abstract Test Suite BNF Backus Naur Form I

43、CS Implementation Conformance Statement IUT Implementation under Test IXIT Implementation eXtra Information for Testing SUT System Under Test TC Test Case TCI TTCN-3 Control Interface TP Test Purpose TRI TTCN-3 Runtime Interface TS Test System TSS Test Suite Structure TSS identification of the imple

44、mentation; ICS pro forma tables (containing the global statement of conformance). A.1.3 Conventions The ICS pro forma is composed of information in tabular form in accordance with the guidelines presented in ISO/IEC 9646-7 2. Item column It contains a number that identifies the item in the table. It

45、em description column It describes each respective item (e.g. parameters, timers, etc.). Reference column It gives reference to the “Using XML Scheme with TTCN-3“ extension 1, except where explicitly stated otherwise. Status column The following notations, defined in ISO/IEC 9646-7 2, are used for t

46、he status column: m mandatory - the capability is required to be supported. n/a not applicable - in the given context, it is impossible to use the capability. No answer in the support column is required. o optional - the capability may be supported or not. ETSI ETSI TS 103 253 V1.2.1 (2016-04)10 o.i

47、 qualified optional - for mutually exclusive or selectable options from a set. “i“ is an integer which identifies a unique group of related optional items and the logic of their selection which is defined immediately following the table. ci conditional - the requirement on the capability (“m“, “o“ o

48、r “n/a“) depends on the support of other optional or conditional items. “i“ is an integer identifying a unique conditional status expression that is defined immediately following the table. For nested conditional expressions, the syntax “IF . THEN (IF . THEN . ELSE.) ELSE .“ shall be used to avoid a

49、mbiguities. If an ELSE clause is omitted, “ELSE n/a“ shall be implied. NOTE: Support of a capability means that the capability is implemented in conformance to the TTCN-3 core language 1. Support column The support column shall be filled in by the supplier of the implementation. The following common notations, defined in ISO/IEC 9646-7 2, are used for the support column: Y or y supported by the implementation. N or n not supported by the implementation. N/A or n/a or “no answer required“ (allowed only i