ETSI TS 103 262-1-2015 Core Network and Interoperability Testing (INT) Diameter Conformance testing for S9 interface (3GPP Release 10) Part 1 Protocol Implementation Conformance St_1.pdf

1、 ETSI TS 103 262-1 V1.2.1 (2015-07) Core Network and Interoperability Testing (INT); Diameter Conformance testing for S9 interface; (3GPP Release 10); Part 1: Protocol Implementation Conformance Statement (PICS) TECHNICAL SPECIFICATION ETSI ETSI TS 103 262-1 V1.2.1 (2015-07)2 Reference RTS/INT-00115

2、-1 Keywords conformance, diameter, PICS, protocol ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important noti

3、ce The present document can be downloaded from: http:/www.etsi.org The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In

4、case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the doc

5、ument may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http:/portal.etsi

6、.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the

7、 written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2015. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.

8、3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 103 262-1 V1.2.1 (2015-07)3 Contents Intellectual Property Rights 4g3Foreword . 4g3

9、Modal verbs terminology 4g3Introduction 4g31 Scope 5g32 References 5g32.1 Normative references . 5g32.2 Informative references 5g33 Definitions and abbreviations . 6g33.1 Definitions 6g33.2 Abbreviations . 6g34 Conformance 6g3Annex A (normative): PICS proforma . 7g3A.0 Introduction 7g3A.1 Guidance f

10、or completing the ICS proforma . 7g3A.1.1 Purposes and structure 7g3A.1.2 Abbreviations and conventions 7g3A.1.3 Instructions for completing the PICS proforma 8g3A.2 Identification of the Network Equipment . 8g3A.2.0 Introduction 8g3A.2.1 Date of the statement 9g3A.2.2 Network Equipment Under Test i

11、dentification. 9g3A.2.3 Product supplier 9g3A.2.4 Client 10g3A.2.5 PICS contact person . 10g3A.3 Identification of the protocol 10g3A.4 Global statement of conformance . 11g3A.5 PICS proforma tables . 11g3A.5.1 Roles . 11g3A.5.2 System Capabilities for H-PCRF 12g3A.5.3 System Capabilities for V-PCRF

12、 14g3History 15g3ETSI ETSI TS 103 262-1 V1.2.1 (2015-07)4 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, a

13、nd can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/ipr.etsi.org). Pursuant to the

14、ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Forew

15、ord This Technical Specification (TS) has been produced by ETSI Technical Committee Core Network and Interoperability Testing (INT). The present document is part 1 of a multi-part deliverable covering the test specifications for the Diameter protocol on the S9 interface, as identified below: Part 1:

16、 “Protocol Implementation Conformance Statement (PICS)“; Part 2: “Test Suite Structure (TSS) and Test Purposes (TP)“; Part 3: “Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification“. Modal verbs terminology In the present document

17、“shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when

18、used in direct citation. Introduction To evaluate protocol conformance of a particular implementation, it is necessary to have a statement of which capabilities and options have been implemented for a telecommunication specification. Such a statement is called a Protocol Implementation Conformance S

19、tatement (PICS). ETSI ETSI TS 103 262-1 V1.2.1 (2015-07)5 1 Scope The present document provides the Protocol Implementation Conformance Statement (PICS) proforma for the test specifications for the Diameter protocol on the S9 interface as specified in ETSI TS 129 215 1 in compliance with the relevan

20、t requirements and in accordance with the relevant guidance given in ISO/IEC 9646-7 3 and ETSI ETS 300 406 4. The supplier of a protocol implementation which is claimed to conform to ETSI TS 129 215 1 is required to complete a copy of the PICS proforma provided in annex A of the present document and

21、 is required to provide the information necessary to identify both the supplier and the implementation. 2 References 2.1 Normative references References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the

22、cited version applies. For non-specific references, the latest version of the reference document (including any amendments) applies. Referenced documents which are not found to be publicly available in the expected location might be found at http:/docbox.etsi.org/Reference. NOTE: While any hyperlink

23、s included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents are necessary for the application of the present document. 1 ETSI TS 129 215 (V10.6.0): “Digital cellular telecommunications system (Phase 2+); Universa

24、l Mobile Telecommunications System (UMTS); LTE; Policy and Charging Control (PCC) over S9 reference point; Stage 3 (3GPP TS 29.215 version 10.6.0 Release 10)“. 2 ISO/IEC 9646-1: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 1: General c

25、oncepts“. 3 ISO/IEC 9646-7: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 7: Implementation Conformance Statements“. 4 ETSI ETS 300 406: “Methods for testing and Specification (MTS); Protocol and profile conformance testing specificatio

26、ns; Standardization methodology“. 2.2 Informative references References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the ref

27、erence document (including any amendments) applies. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents are not necessary for the application of the present document but they assi

28、st the user with regard to a particular subject area. i.1 ETSI TR 121 905 (V10.3.0): “Digital cellular telecommunications system (Phase 2+); Universal Mobile Telecommunications System (UMTS); LTE; Vocabulary for 3GPP Specifications (3GPP TR 21.905 version 10.3.0 Release 10)“. ETSI ETSI TS 103 262-1

29、V1.2.1 (2015-07)6 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in ETSI TS 129 215 1 and the following apply: PICS proforma: document, in the form of a questionnaire, designed by the protocol specifier or conformance test su

30、ite specifier, which, when completed for an OSI implementation or system, becomes the PICS NOTE: See ISO/IEC 9646-1 2. Protocol Implementation Conformance Statement (PICS): statement made by the supplier of an Open Systems Interconnection (OSI) implementation or system, stating which capabilities ha

31、ve been implemented for a given OSI protocol NOTE: See ISO/IEC 9646-1 2. static conformance review: review of the extent to which the static conformance requirements are met by the IUT, accomplished by comparing the PICS with the static conformance requirements expressed in the relevant standard(s)

32、NOTE: See ISO/IEC 9646-1 2. 3.2 Abbreviations For the purposes of the present document, the abbreviations given in ETSI TS 129 215 1 and ETSI TR 121 905 i.1 apply. 4 Conformance A PICS proforma which conforms to this PICS proforma specification shall be technically equivalent to annex A, and shall p

33、reserve the numbering and ordering of the items in annex A. A PICS which conforms to this PICS proforma specification shall: a) describe an implementation which claims to conform to ETSI TS 129 215 1; b) be a conforming ICS proforma which has been completed in accordance with the instructions for co

34、mpletion given in clause A.1; c) include the information necessary to uniquely identify both the supplier and the implementation. ETSI ETSI TS 103 262-1 V1.2.1 (2015-07)7 Annex A (normative): PICS proforma A.0 Introduction Notwithstanding the provisions of the copyright clause related to the text of

35、 the present document, ETSI grants that users of the present document may freely reproduce the PICS proforma in this annex so that it can be used for its intended purposes and may further publish the completed PICS proforma. A.1 Guidance for completing the ICS proforma A.1.1 Purposes and structure T

36、he purpose of this PICS proforma is to provide a mechanism whereby a supplier of an implementation of the requirements defined in relevant specifications may provide information about the implementation in a standardized manner. The PICS proforma is subdivided into clauses for the following categori

37、es of information: instructions for completing the PICS proforma; identification of the implementation; identification of the protocol; PICS proforma tables (for example: Major capabilities, etc.). A.1.2 Abbreviations and conventions This annex does not reflect dynamic conformance requirements but s

38、tatic ones. In particular, a condition for support of a PDU parameter does not reflect requirements about the syntax of the PDU (i.e. the presence of a parameter) but the capability of the implementation to support the parameter. In the sending direction, the support of a parameter means that the im

39、plementation is able to send this parameter (but it does not mean that the implementation always sends it). In the receiving direction, it means that the implementation supports the whole semantic of the parameter that is described in the related protocol specification. As a consequence, PDU paramet

40、er tables in this annex are not the same as the tables describing the syntax of a PDU in the reference specification. The PICS proforma contained in this annex is comprised of information in tabular form in accordance with the guidelines presented in ISO/IEC 9646-7 3. Item column The item column con

41、tains a number which identifies the item in the table. Item description column The item description column describes in free text each respective item (e.g. parameters, timers, etc.). It implicitly means “is supported by the implementation?“. Reference column The reference column makes reference to

42、ETSI TS 129 215 1, except where explicitly stated otherwise. Status column The various status used in this annex are in accordance with the rules in table A.1. ETSI ETSI TS 103 262-1 V1.2.1 (2015-07)8 Table A.1: Key to status codes Status code Status name Meaning m mandatory The capability shall be

43、supported. It is a static view of the fact that the conformance requirements related to the capability in the reference specification are mandatory requirements. This does not mean that a given behaviour shall always be observed (this would be a dynamic view), but that it shall be observed when the

44、implementation is placed in conditions where the conformance requirements from the reference specification compel it to do so. For instance, if the support for a parameter in a sent PDU is mandatory, it does not mean that it shall always be present, but that it shall be present according to the desc

45、ription of the behaviour in the reference specification (dynamic conformance requirement). o optional The capability may or may not be supported. It is an implementation choice. n/a not applicable It is impossible to use the capability. No answer in the support column is required. c. conditional The

46、 requirement on the capability (“m“, “o“, “n/a“) depends on the support of other optional or conditional items. is the identifier of the conditional expression. o. qualified optional For mutually exclusive or selectable options from a set. is the identifier of the group of options, and the logic of

47、selection of the options. Mnemonic column The Mnemonic column contains mnemonic identifiers for each item. Support column The support column shall be filled in by the supplier of the implementation. The following common notations, defined in ISO/IEC 9646-7 3, are used for the support column: Y or y

48、supported by the implementation N or n not supported by the implementation N/A, n/a or - no answer required (allowed only if the status is N/A, directly or after evaluation of a conditional status) References to items For each possible item answer (answer in the support column) within the PICS profo

49、rma there exists a unique reference, used, for example, in the conditional expressions. It is defined as the table identifier, followed by a solidus character “/“, followed by the item number in the table. EXAMPLE: A.5/4 is the reference to the answer of item 4 in table A.5. A.1.3 Instructions for completing the PICS proforma The supplier of the implementation may complete the PICS proforma in each of the spaces provided. More detailed instructions are given at the beginning of the different clauses of the PICS proforma. A.