ETSI TS 103 289-3-2016 Core Network and Interoperability Testing (INT) Diameter Conformance testing for Cx and Dx interfaces (3GPP Release 10) Part 3 Abstract Test Suite (ATS) and .pdf

1、 ETSI TS 103 289-3 V2.1.1 (2016-07) Core Network and Interoperability Testing (INT); Diameter Conformance testing for Cx and Dx interfaces; (3GPP Release 10); Part 3: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) pro forma specification floppy3TE

2、CHNICAL SPECIFICATION ETSI ETSI TS 103 289-3 V2.1.1 (2016-07)2 Reference RTS/INT-00128-3 Keywords ATS, conformance, diameter, PIXIT ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but

3、 non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions

4、 of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specifi

5、c network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find

6、 errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm

7、 except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2016. All rights reser

8、ved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by

9、the GSM Association. ETSI ETSI TS 103 289-3 V2.1.1 (2016-07)3 Contents Intellectual Property Rights 5g3Foreword . 5g3Modal verbs terminology 5g31 Scope 6g32 References 6g32.1 Normative references . 6g32.2 Informative references 7g33 Definitions and abbreviations . 7g33.1 Definitions 7g33.2 Abbreviat

10、ions . 7g34 Abstract Test Method (ATM) . 7g34.1 Introduction 7g34.2 Test architecture . 8g34.2.1 Test method 8g34.2.2 Test machine configuration. 8g34.2.2.1 Test configurations using Cx interface 8g34.2.2.2 Test configurations using the Dx interface 9g34.2.3 Interconnection of TS and SUT 10g34.2.3.1

11、 HSS Role . 10g34.2.3.2 CSCF Role 11g34.1.3.3 SLF Role . 11g34.2.3.4 Test Adapter 12g35 ATS conventions 12g35.0 Introduction 12g35.1 Testing conventions 12g35.1.1 Test cases Preamble and Postamble 12g35.2 Naming conventions . 13g35.2.1 General guidelines 13g35.2.2 Test case grouping 14g35.2.3 Test c

12、ase identifiers 14g3Annex A (normative): DIAMETER Cx Partial PIXIT proforma . 15g3A.0 Introduction 15g3A.1 Identification summary. 15g3A.2 ATS summary 15g3A.3 Test laboratory 15g3A.4 Client identification 15g3A.5 SUT 16g3A.6 Protocol layer information 16g3A.6.1 Protocol identification 16g3A.7 PIXIT

13、items 16g3A.7.1 Cx related PIXIT items . 16g3Annex B (normative): DIAMETER Dx Partial PIXIT proforma . 20g3B.0 Introduction 20g3B.1 Identification summary. 20g3B.2 ATS summary 20g3ETSI ETSI TS 103 289-3 V2.1.1 (2016-07)4 B.3 Test laboratory 20g3B.4 Client identification 20g3B.5 SUT 21g3B.6 Protocol

14、layer information 21g3B.6.1 Protocol identification 21g3B.7 PIXIT items 21g3B.7.1 Dx related PIXIT items 21g3Annex C (normative): DIAMETER Cx and Dx Abstract Test Suite (ATS) . 22g3History 23g3ETSI ETSI TS 103 289-3 V2.1.1 (2016-07)5 Intellectual Property Rights IPRs essential or potentially essenti

15、al to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified

16、 to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to t

17、he existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI Technical Committee Core Network and Interoperability Test

18、ing (INT). The present document is part 3 of a multi-part deliverable covering the test specifications for the Diameter protocol on the Cx and Dx interfaces, as identified below: Part 1: “Protocol Implementation Conformance Statement (PICS)“; Part 2: “Test Suite Structure (TSS) and Test Purposes (TP

19、)“; Part 3: “Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) pro forma specification“. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be

20、 interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 103 289-3 V2.1.1 (2016-07)6 1 Scope The present document specifies the Abst

21、ract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma for the test specifications for Diameter protocol on the Cx and Dx interfaces as specified in ETSI TS 129 228 1 and ETSI TS 129 229 2 in compliance with the relevant requirements and in accordanc

22、e with the relevant guidance given in ISO/IEC 9646-7 6 and ETSI ETS 300 406 7. The test notation used in the ATS is TTCN-3 (see ETSI ES 201 873-1 8). The following test specification and design considerations can be found in the body of the present document: the overall test suite structure; the tes

23、ting architecture; the test methods and port definitions; the test configurations; TTCN styles and conventions; the partial PIXIT proforma; the modules containing the TTCN-3 ATS. Annex A provides the Partial Implementation Extra Information for Testing (PIXIT) Proforma. Annex B provides the Abstract

24、 Test Suite (ATS) part of the ATS. 2 References 2.1 Normative references References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest versio

25、n of the referenced document (including any amendments) applies. Referenced documents which are not found to be publicly available in the expected location might be found at http:/docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETS

26、I cannot guarantee their long term validity. The following referenced documents are necessary for the application of the present document. 1 ETSI TS 129 228 (V10.8.0): “Digital cellular telecommunications system (Phase 2+); Universal Mobile Telecommunications System (UMTS); LTE; IP Multimedia (IM) S

27、ubsystem Cx and Dx Interfaces; Signalling flows and message contents (3GPP TS 29.228 version 10.8.0 Release 10)“. 2 ETSI TS 129 229 (V10.5.0): “Digital cellular telecommunications system (Phase 2+); Universal Mobile Telecommunications System (UMTS); LTE; Cx and Dx interfaces based on the Diameter pr

28、otocol; Protocol details (3GPP TS 29.229 version 10.5.0 Release 10)“. 3 ETSI TS 103 289-2: “Core Network and Interoperability Testing (INT); Diameter Conformance testing for Cx and Dx interfaces; (3GPP Release 10); Part 2: Test Suite Structure (TSS) and Test Purposes (TP)“. 4 ISO/IEC 9646-1: “Inform

29、ation technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 1: General concepts“. ETSI ETSI TS 103 289-3 V2.1.1 (2016-07)7 5 ISO/IEC 9646-6: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 6: Pro

30、tocol profile test specification“. 6 ISO/IEC 9646-7: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 7: Implementation Conformance Statements“. 7 ETSI ETS 300 406: “Methods for testing and Specification (MTS); Protocol and profile conform

31、ance testing specifications; Standardization methodology“. 8 ETSI ES 201 873-1: “Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 1: TTCN-3 Core Language“. 2.2 Informative references References are either specific (identified by date of publication a

32、nd/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the referenced document (including any amendments) applies. NOTE: While any hyperlinks included in this clause were valid at the time o

33、f publication, ETSI cannot guarantee their long term validity. The following referenced documents are not necessary for the application of the present document but they assist the user with regard to a particular subject area. Not applicable. 3 Definitions and abbreviations 3.1 Definitions For the p

34、urposes of the present document, the terms and definitions given in ISO/IEC 9646-7 6 and ETSI TS 129 228 1 apply. 3.2 Abbreviations For the purposes of the present document, the abbreviations given in ISO/IEC 9646-1 4, ISO/IEC 9646-6 5, ISO/IEC 9646-7 6 and ETSI TS 129 228 1 apply. 4 Abstract Test M

35、ethod (ATM) 4.1 Introduction This clause describes the ATM used to test ETSI TS 129 229 2. NOTE: In a real operating network the different Diameter nodes would not connect directly to each other. The connection is usually proxied through one or more Diameter Agents. In the following test architectur

36、e figures the Diameter Agent is not explicitly depicted as it is seen as a transparent message handler for conformance testing purposes. ETSI ETSI TS 103 289-3 V2.1.1 (2016-07)8 4.2 Test architecture 4.2.1 Test method The test method chosen is the remote test method. Remote test method means that th

37、e test tool (the test machine + the executable test suite) shall behave as a CSCF when the IUT is an HSS or an SLF and shall behave as an HSS or SLF when the IUT is a CSCF. As the exchange between the test system and the IUT is at the diameter message level, the lower layers of the test machine shal

38、l be totally conformant with the corresponding lower layers specifications to use the remote test method. 4.2.2 Test machine configuration 4.2.2.1 Test configurations using Cx interface The Cx interface is located between a CSCF and the HSS. Figure 1: Test configuration CF_1Cx Figure 2: Test configu

39、ration CF_2Cx TS SUT Cx HSS CSCF TS SUT Cx1 Cx2 HSS CSCF1 CSCF2 ETSI ETSI TS 103 289-3 V2.1.1 (2016-07)9 Figure 3: Test configuration CF_3Cx NOTE 1: Within figure 3 CSCF represents one I-CSCF and two S-CSCF components. Cx interface (DIAMETER protocol) is located between an HSS and I-CSCF or between

40、an HSS and S-CSCF. Figure 4: Test configuration CF_1Cx1Gm NOTE 2: Within figure 4 CSCF represents P-CSCF, I-CSCF and S-CSCF components. Gm interface (SIP protocol) is located between a UE and P-CSCF. Cx interface (DIAMETER protocol) is located between an HSS and I-CSCF or between an HSS and S-CSCF.

41、4.2.2.2 Test configurations using the Dx interface The Dx interface is located between a CSCF and the SLF. Figure 5: Test configuration CF_1Dx TS SUT Cx1 Cx3 HSS CSCF1 CSCF2 CSCF3 Cx2 TS SUT Cx CSCF HSS TS UE Gm TS SUT Dx SLF CSCF ETSI ETSI TS 103 289-3 V2.1.1 (2016-07) 10 Figure 6: Test configurati

42、on CF_1Dx1Cx1Gm NOTE: Within figure 5 CSCF represents P-CSCF, I-CSCF and S-CSCF components. Gm interface (SIP protocol) is located between a UE and P-CSCF. Cx interface (DIAMETER protocol) is located between an HSS and I-CSCF or between an HSS and S-CSCF. Dx interface (DIAMETER protocol) is located

43、between an SLF and I-CSCF or between an SLF and S-CSCF. 4.2.3 Interconnection of TS and SUT 4.2.3.1 HSS Role Figure 7 shows the interconnection of TS and SUT in terms of Diameter message flows. Diameter messages are transferred over the DIAM port. However in case of several Cx interfaces (CF_2Cx and

44、 CF_3Cx) there will be only one test component communicating with the SUT and running the behaviour of all I-CSCF and S-CSCF. C SC F _ C xTSp o rt : D I A M PCS CFS U THS Smap ( v _ d i ame t e r C x _ c s c f : D I A M P , s y s t e m: C S C F _ C x ) ; Figure 7: Interconnection for HSS role TS SUT

45、 CSCF TS UE Gm Dx Cx SLF HSS ETSI ETSI TS 103 289-3 V2.1.1 (2016-07)11 4.2.3.2 CSCF Role If SUT has the role of CSCF figure 8 shows the interconnection of TS and SUT in terms of signalling message flows. Diameter messages are transferred over the DIAM port. IMS messages are transferred over the Gm.

46、The use of the Dx port depends on the selected test suite group. HSS_CxTSport:DIAMPHSSSUTCSCFg373g258g393g894g3g448g890g282g349g258g373g286g410g286g396g24g454g890g400g367g296g855g24g47g4g68g87g853g3g400g455g400g410g286g373g855g44g94g94g890g24g454g895g854g373g258g393g894g3g448g890g282g349g258g373g286

47、g410g286g396g18g454g890g346g400g400g855g24g47g4g68g87g853g3g400g455g400g410g286g373g855g44g94g94g890g18g454g3g895g854g3g373g258g393g894g3g448g890g400g349g393g39g373g890g437g286g855g94g47g87g87g853g3g400g455g400g410g286g373g855g104g28g890g39g373g3g895g854g3SLFport:DIAMPHSS_DxUEport:UE_GmSIPPFigure 8:

48、 Interconnection for CSCF role 4.2.3.3 SLF Role If SUT has the role of SLF figure 9 shows the interconnection of TS and SUT in terms of signalling message flows. Diameter messages are transferred over the DIAM port. ETSI ETSI TS 103 289-3 V2.1.1 (2016-07)12 TSg94g104g100g94g62g38g373g258g393g894g3g4

49、48g890g282g349g258g373g286g410g286g396g24g454g890g400g367g296g855g24g47g4g68g87g853g3g400g455g400g410g286g373g855g44g94g94g890g24g454g895g854g18g94g18g38port:DIAMPHSS_DxFigure 9: Interconnection for SLF role 4.2.3.4 Test Adapter For execution of the tests the Test Adapter (TA) shall be developed. There are two possibilities to communicate over TA: ATS provides only Diameter messages; or ATS provides Diameter messages and SIP messages. 5 ATS conventions 5.0 Introduction The ATS conventions are intended to give