ETSI TS 103 329-2016 Wireless Industrial Applications (WIA) Radio equipment to be used in the 5 725 GHz to 5 875 GHz frequency range with power level up to 400 mW Methods and concehe.pdf

1、 ETSI TS 103 329 V1.1.1 (2016-06) Wireless Industrial Applications (WIA); Radio equipment to be used in the 5,725 GHz to 5,875 GHz frequency range with power level up to 400 mW; Methods and concepts for a WIA system approach to sharing in the 5,725 GHz to 5,875 GHz band TECHNICAL SPECIFICATION ETSI

2、ETSI TS 103 329 V1.1.1 (2016-06)2 Reference DTS/ERM-TG41-002 Keywords access control, radio ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfectu

3、re de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be mo

4、dified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.

5、 Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please

6、send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permiss

7、ion of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2016. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the

8、ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 103 32

9、9 V1.1.1 (2016-06)3 Content Intellectual Property Rights 4g3Foreword . 4g3Modal verbs terminology 4g3Introduction 4g31 Scope 5g32 References 5g32.1 Normative references . 5g32.2 Informative references 5g33 Definitions, symbols and abbreviations . 6g33.1 Definitions 6g33.2 Symbols 6g33.3 Abbreviation

10、s . 7g34 Concept of Central Coordination Point 7g34.1 Overview 7g34.2 CCP concept for sharing with other incumbent services and applications operating within the 5,8 GHz band 8g34.2.1 General 8g34.2.2 Incumbent Protection 10g34.3 CCP concept for intra-system coexistence operating within the 5,8 GHz

11、band . 10g34.3.1 General 10g34.3.2 Inter-Network Sensing Assistance 11g35 Architecture of CCP . 12g35.1 General . 12g35.2 Equipment Types 13g35.2.1 WIA device. 13g35.2.1.1 WIA device with per device mitigation and spectrum access mechanism 13g35.2.1.2 CCP controlled WIA device 14g35.2.1.3 CCP-contro

12、lled WIA device with per device mitigation and spectrum access mechanism 14g35.2.2 Central Coordination Point . 14g35.3 Local Industrial Environment Resource Database . 14g35.4 Spectrum Manager . 15g35.4.1 Overview 15g35.4.2 Incumbent Service Database . 15g35.4.3 Spectrum Resource Engine. 16g35.4.4

13、Radio System and Device Registration and Management 16g35.4.5 Automation Application Resource Management 16g35.5 Spectrum Sensing Unit . 16g35.6 Functions 17g35.6.1 Mitigation techniques . 17g35.6.1.1 General 17g3History 18g3ETSI ETSI TS 103 329 V1.1.1 (2016-06)4 Intellectual Property Rights IPRs es

14、sential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potent

15、ially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No

16、guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI Technical Committee Electrom

17、agnetic compatibility and Radio spectrum Matters (ERM). Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms fo

18、r the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. Introduction The present document describes radio aspects related to the central coordination point (CCP) concept. The intended application domain is wireless industrial a

19、pplications (WIA) within the 5,8 GHz WIA band. The concept of a central coordination point (CCP) is a mechanism which allows the coordination of multiple devices and/or multiple networks using single or multiple spectrum access technologies with the intension of optimizing spectrum efficiency and en

20、suring coexistence. The objective of the CCP as described in the present document, is to establish an automated adaptive coexistence management for the 5,8 GHz WIA band, which means that the CCP identifies and manages the available spectrum for WIA under its control. The CCP employs mitigation techn

21、iques like Dynamic Frequency Selection (DFS) and Detect and Avoid (DAA) in order to protect incumbent services or applications. NOTE: The term device is used in the present document as a synonym for equipment. The technical specifications of higher layer protocol mechanisms that are needed to allow

22、a multi-vendor-capable-CCP are not part of the present document. ETSI ETSI TS 103 329 V1.1.1 (2016-06)5 1 Scope The present document describes methods and concepts for a Central Coordination Point (CCP) in order to support spectrum sharing between WIA devices with power level up to 400 mW and other

23、systems operating in the 5,725 GHz to 5,875 GHz band, i.e. the 5,8 GHz WIA band. The present document covers two aspects: CCP for sharing with incumbent services/applications (e.g. those identified in ECC Report 206 i.1). CCP for Intra-system coexistence. 2 References 2.1 Normative references Refere

24、nces are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the referenced document (including any amendments) applies. Referenced doc

25、uments which are not found to be publicly available in the expected location might be found at http:/docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents

26、 are necessary for the application of the present document. Not applicable. 2.2 Informative references References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific

27、 references, the latest version of the referenced document (including any amendments) applies. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents are not necessary for the applic

28、ation of the present document but they assist the user with regard to a particular subject area. i.1 ECC Report 206: “Compatibility studies in the band 5725-5875 MHz between SRD equipment for wireless industrial applications and other systems“. i.2 Gnad, A.; Krtzig, M.; Schade, J.; Schnrock, R.; Tri

29、kaliotis, S.; Rauchhaupt, L.: “Software Defined Radio und Cognitive Radio in der industriellen Automation. Deutsche Forschungsgesellschaft fr Automation und Mikroelektronik (DFAM), ISBN: 978-3-8163-0614-6, VDMA Verlag, Frankfurt(Main), 2011“. i.3 CENELEC EN 62591 (2010): “Industrial communication ne

30、tworks - Wireless communication network and communication profiles - WirelessHART“. i.4 CENELEC EN 62734 (2015): “Industrial networks - Wireless communication network and communication profiles - ISA 100.11a“. i.5 CENELEC EN 62657-2 (2015): “Industrial communication networks - Wireless Communication

31、 networks - Part 2: Coexistence management“. i.6 CENELEC EN 61158-1:2014: “Industrial communication networks - Fieldbus specifications - Part 1: Overview and guidance for the IEC 61158 and IEC 61784 series“. ETSI ETSI TS 103 329 V1.1.1 (2016-06)6 i.7 CENELEC EN 61918:2013: “Industrial communication

32、networks - Installation of communication networks in industrial premises“. 3 Definitions, symbols and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in CENELEC EN 62657-2 i.5 and the following apply: 5,8 GHz WIA band: Wireless Industrial Autom

33、ation (WIA) assigned total frequency range of 5 725 MHz to 5 875 MHz Central Coordination Point (CCP): device coordinating resources in the different wireless systems/networks coexistence (wireless communication coexistence): state in which all wireless communication solutions of a plant using share

34、d medium fulfil all their application communication requirements frequency range: range of operating frequencies over which the equipment can be adjusted harmful interference: interference which endangers the functioning of a radionavigation service or of other safety services or which otherwise ser

35、iously degrades, obstructs or repeatedly interrupts a radiocommunications service operating in accordance with the applicable Community or national regulations network: all of the media, connectors, repeaters, routers, gateways and associated node communication elements by which a given set of commu

36、nicating devices are interconnected NOTE: The definition is the same as in CENELEC EN 61158-1:2014, 3.1.30 i.6. node: end-point of a branch in a network NOTE: The definition is the same as in CENELEC EN 61918:2013, 3.1.50 i.7. radio equipment: an electrical or electronic product, which intentionally

37、 emits and/or receives radio waves for the purpose of radio communication and/or radiodetermination, or an electrical or electronic product which is always completed with an accessory, such as antenna, so as to intentionally emit and/or receive radio waves for the purpose of radio communication and/

38、or radiodetermination radio communication: communication by means of radio waves radiodetermination: determination of the position, velocity and/or other characteristics of an object, or the obtaining of information relating to those parameters, by means of the propagation properties of radio waves

39、radio waves: electromagnetic waves of frequencies lower than 3 000 GHz, propagated in space without artificial guide 3.2 Symbols For the purposes of the present document, the following symbols apply: dBm dB relative to 1 milliwatt GHz Gigahertz Hz Hertz kHz kilohertz MHz MegahertzW Watt ETSI ETSI TS

40、 103 329 V1.1.1 (2016-06)7 3.3 Abbreviations For the purposes of the present document, the following abbreviations apply: AARM Automation Application Resource Management AFA Adaptive Frequency Agility BFWA Broadband Fixed Wireless Access CCP Central Coordination PointCCW CCP Controlled WIA DAA Detec

41、t And AvoidDFS Dynamic Frequency Selection EIRP Effective Isotropic Radiated Power FSS Fixed Satellite Services ISDB Incumbent Service/Application Database ITS Intelligent Transport System LRDB Local Industrial Environment Resource Database RF Radio Frequency RLAN Radio Local Access Network RRM Radi

42、o system and device Registration and Management SM Spectrum Manager SRE Spectrum Resource Engine SSU Spectrum Sensing UnitTTT Transport and Traffic Telematics WIA Wireless Industrial Application4 Concept of Central Coordination Point 4.1 Overview The idea of a central coordination point (CCP) is to

43、coordinate between multiple devices and/or multiple wireless networks using single wireless communication solution or multiple wireless communication solutions. The aim is to further improve the use of spectrum. The main idea is that a central device should coordinate the use of spectrum by these de

44、vices and/or networks with respect to bandwidth, time and space for multiple devices and/or networks, instead of using mitigation techniques individually per radio device. In general, the functional architecture for radio systems with CCP shall fulfil the following basic requirements: Support of spe

45、ctrum coordination mechanisms to provide coexistence between different systems and services in the same frequency range, with the aim of: - Protection of incumbent radio systems (e.g. Radiolocation, BFWA, ITS). - Avoidance of harmful interferences. Support of mechanisms for automatically spectrum al

46、location and spectrum access, with the aim of: - Recognition of free and occupied spectrum. - Detection and classification of incumbent radio systems and services. Support mechanisms for continuous surveillance of the frequency spectrum condition. The resources can be selected in time, in frequency

47、and in space domain. The CCP can organize the available spectrum resources and assign resource blocks to the different wireless networks or devices within the 5,8 GHz WIA band. ETSI ETSI TS 103 329 V1.1.1 (2016-06)8 The CCP shall communicate with network access points or with individual wireless dev

48、ices by means of one or more communication channels and protocols. Therefore, the CCP shall fulfil the following requirements: Support of different radio technologies. Support of interface for interoperability. Support of interface for coordination. Two scenarios can be considered: 1) CCP for sharin

49、g with other incumbent services/applications. This scenario is described in clause 4.2. 2) CCP for intra-system coexistence. This scenario is described in clause 4.3. The CCP for intra-system coexistence can substitute manual coexistence management as defined by CENELEC EN 62657-2 i.5. The CCP is scheduling resources to the different wireless systems. This can include CCP to single device communications or CCP to network access point communication. In the latter case, the network access point will then use the CCP information to con