ETSI TS 103 374-3-2017 Core Network and Interoperability Testing (INT) Diameter Conformance testing for Rf Ro interface Part 3 Abstract Test Suite (ATS) and partial Protocol Implem).pdf

1、 ETSI TS 103 374-3 V1.2.1 (2017-01) Core Network and Interoperability Testing (INT); Diameter Conformance testing for Rf/Ro interface; (3GPP Release 10); Part 3: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) pro forma specification floppy3TECHNIC

2、AL SPECIFICATION ETSI ETSI TS 103 374-3 V1.2.1 (2017-01)2 Reference RTS/INT-00131-3 Keywords ATS, conformance, diameter, PIXIT ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non

3、lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of t

4、he present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific net

5、work drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find erro

6、rs in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm exce

7、pt as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2017. All rights reserved.

8、DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the G

9、SM Association. ETSI ETSI TS 103 374-3 V1.2.1 (2017-01)3 Contents Intellectual Property Rights 5g3Foreword . 5g3Modal verbs terminology 5g31 Scope 6g32 References 6g32.1 Normative references . 6g32.2 Informative references 7g33 Definitions and abbreviations . 7g33.1 Definitions 7g33.2 Abbreviations

10、. 7g34 Abstract Test Method (ATM) . 7g34.1 Introduction 7g34.2 Test architecture . 8g34.2.1 Test method 8g34.2.2 Test machine configuration. 9g34.2.2.1 Test configurations using Rf interface 9g34.2.2.2 Test configurations using Ro interface 11g34.2.3 Interconnection of TS and SUT 13g34.2.3.1 Rf inte

11、rface 13g34.2.3.1.1 CDF Role . 13g34.2.3.1.2 CTF Role . 14g34.2.3.2 Ro interface . 16g34.2.3.2.1 OCF role 16g34.2.3.2.2 CTF role 17g34.2.3.3 Test Adapter 18g35 ATS conventions 18g35.1 Introduction 18g35.2 Testing conventions 19g35.2.1 Test cases Preamble and Postamble 19g35.3 Naming conventions . 19

12、g35.3.1 General guidelines 19g35.3.2 Test case grouping 20g35.3.3 Test case identifiers 20g3Annex A (normative): DIAMETER Rf/Ro Partial PIXIT pro forma . 21g3A.1 The right to copy 21g3A.2 Identification summary. 21g3A.3 ATS summary 21g3A.4 Test laboratory 21g3A.5 Client identification 21g3A.6 SUT 22

13、g3A.7 Protocol layer information 22g3A.7.1 Protocol identification 22g3A.8 PIXIT items 22g3A.8.1 Introduction 22g3A.8.2 Port and Address items . 23g3A.8.3 Rf/Ro interface items 24g3A.8.4 LibSip items . 25g3A.8.5 LibCommon items 25g3ETSI ETSI TS 103 374-3 V1.2.1 (2017-01)4 Annex B (normative): DIAMET

14、ER Rf/Ro Abstract Test Suite (ATS) . 26g3B.1 The TTCN-3 Module 26g3History 27g3ETSI ETSI TS 103 374-3 V1.2.1 (2017-01)5 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if

15、any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available

16、 on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or

17、 may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI Technical Committee Core Network and Interoperability Testing (INT). The present document is part 3 of a multi-part deliverable. Full details of the entire series can be fo

18、und in part 1 i.1. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “mus

19、t“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 103 374-3 V1.2.1 (2017-01)6 1 Scope The present document specifies the Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) pro forma for the test s

20、pecifications for Diameter protocol on the Rf/Ro interface as specified in ETSI TS 132 260 1 and ETSI TS 132 299 2 in compliance with the relevant requirements and in accordance with the relevant guidance given in ISO/IEC 9646-7 7 and ETSI ETS 300 406 8. The test notation used in the ATS is TTCN-3 (

21、see ETSI ES 201 873-1 9). The following test specification and design considerations can be found in the body of the present document: the overall test suite structure; the testing architecture; the test methods and port definitions; the test configurations; TTCN styles and conventions; the partial

22、PIXIT pro forma; the modules containing the TTCN-3 ATS. Annex A provides the Partial Implementation Extra Information for Testing (PIXIT) Pro forma. Annex B provides the Abstract Test Suite (ATS) part of the ATS. 2 References 2.1 Normative references References are either specific (identified by dat

23、e of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the referenced document (including any amendments) applies. Referenced documents which are not found to be publicly a

24、vailable in the expected location might be found at https:/docbox.etsi.org/Reference/. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents are necessary for the application of the

25、 present document. 1 ETSI TS 132 260 (V10.14.0): “Digital cellular telecommunications system (Phase 2+); Universal Mobile Telecommunications System (UMTS); LTE; Telecommunication management; Charging management; IP Multimedia Subsystem (IMS) charging (3GPP TS 32.260 version 10.14.0 Release 10)“. 2 E

26、TSI TS 132 299 (V10.15.0): “Digital cellular telecommunications system (Phase 2+); Universal Mobile Telecommunications System (UMTS); LTE; Telecommunication management; Charging management; Diameter charging applications (3GPP TS 32.299 version 10.15.0 Release 10)“. 3 ETSI TS-103 374-1: “ Core Netwo

27、rk and Interoperability Testing (INT); Diameter Conformance testing for Rf/Ro interface; (3GPP Release 10); Part 1: Protocol Implementation Conformance Statement (PICS)“. 4 ETSI TS 103 374-2: “Core Network and Interoperability Testing (INT); Diameter Conformance testing for Rf/Ro interface; (3GPP Re

28、lease 10); Part 2: Test Suite Structure (TSS) and Test Purposes (TP)“. ETSI ETSI TS 103 374-3 V1.2.1 (2017-01)7 5 ISO/IEC 9646-1: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 1: General concepts“. 6 ISO/IEC 9646-6: “Information technol

29、ogy - Open Systems Interconnection - Conformance testing methodology and framework - Part 6: Protocol profile test specification“. 7 ISO/IEC 9646-7: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 7: Implementation Conformance Statements“

30、. 8 ETSI ETS 300 406: “Methods for testing and Specification (MTS); Protocol and profile conformance testing specifications; Standardization methodology“. 9 ETSI ES 201 873-1: “Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 1: TTCN-3 Core Language“

31、. 2.2 Informative references References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the referenced document (including any

32、amendments) applies. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents are not necessary for the application of the present document but they assist the user with regard to a pa

33、rticular subject area. i.1 ETSI TS 103 374-1: “Core Network and Interoperability Testing (INT); Diameter Conformance testing for Rf/Ro interface; (3GPP Release 10); Part 1: Protocol Implementation Conformance Statement (PICS)“. 3 Definitions and abbreviations 3.1 Definitions For the purposes of the

34、present document, the terms and definitions given in ISO/IEC 9646-7 7, ETSI TS 132 260 1 and ETSI TS 132 299 2 apply. 3.2 Abbreviations For the purposes of the present document, the abbreviations given in ISO/IEC 9646-1 5, ISO/IEC 9646-6 6, ISO/IEC 9646-7 7, ETSI TS 132 260 1 and ETSI TS 132 299 2 a

35、pply. 4 Abstract Test Method (ATM) 4.1 Introduction This clause describes the ATM used to test the Diameter protocol on the Rf/Ro interface at the x-CSCF side and at the charging servers (Rf: CTF/CDF, To: OCF/CTF) side. ETSI ETSI TS 103 374-3 V1.2.1 (2017-01)8 4.2 Test architecture 4.2.1 Test method

36、 The Rf and the Ro are reference points from the Charging Trigger Function (CTF) to the Charging Data Function (CDF) and the Online Charging Function (OCF) respectively, and are intended for the transport of charging events. Rf is used for offline charging whereas Ro is used for online charging. The

37、 following figures depict the position of the Rf and Ro reference points within the overall 3GPP online and offline charging architecture. CN Domain Service nodes Sub- system Billing Domain Rf Ga Bx CT F C D F CG F 3GPP network Rf Rf CTF: Charging Trigger Function CDF: Charging Data Function CGF: Ch

38、arging Gateway Function BD: Billing Domain. This may also be a billing mediation device / post-processing system. Figure 1: Logical ubiquitous offline charging architecture CN Domain Service nodes Sub- system Billing Domain Ro Ga Bo CT F O C F CG F 3GPP network Ro RoCTF: Charging Trigger Function OC

39、F: Online Charging Function CGF: Charging Gateway Function BD: Billing Domain. This may also be a billing mediation device / post-processing system. Figure 2: Logical ubiquitous online charging architecture ETSI ETSI TS 103 374-3 V1.2.1 (2017-01)9 The test method chosen is the remote test method. Re

40、mote test method means that the test tool (the test machine + the executable test suite) shall behave as an x-CSCF when the IUT is a charging server and shall behave as a charging server when the IUT is an x-CSCF. As the exchange between the test system and the IUT is at the diameter message level,

41、the lower layers of the test machine shall be totally conformant with the corresponding lower layers specifications to use the remote test method. 4.2.2 Test machine configuration 4.2.2.1 Test configurations using Rf interface The Rf interface is located between a CTF equipment hosted by an x-CSCF o

42、r a SIP AS and the CDF. Figure 3: Test configuration CF_1Rf Figure 4: Test configuration CF_1Rf1Gm TS or (SUT) SUT or (TS) Rf CDF CTF TS SUT Gm CTFs UE1 TS CDF Rf ETSI ETSI TS 103 374-3 V1.2.1 (2017-01)10 Figure 5: Test configuration CF_1Rf1Gm1Mw Figure 6: Test configuration CF_1Rf1Gm1Ic Figure 7: T

43、est configuration CF_1Rf1Isc TS SUT Gm CTFs UE TS CDF Rf I-CSCF Mw TS SUT Gm CTFs UE TS CDF Rf IBCF Ic TS SUT CTFs TS CDF Rf S-CSCF Isc ETSI ETSI TS 103 374-3 V1.2.1 (2017-01)11 Figure 8: Test configuration CF_2Rf1Gm1Mw 4.2.2.2 Test configurations using Ro interface The Ro interface is located betwe

44、en a CTF equipment hosted by an MRFC or a SIP AS or an IMS GW and the OCF. Figure 9: Test configuration CF_1Ro Figure 10: Test configuration CF_2Ro SUT TS TS Gm CTFs UE CDF Rf I-CSCF Mw CDF Rf TS or (SUT) SUT or (TS) Ro OCF CTF TS or (SUT) SUT or (TS) Ro OCF CTF OCF Ro ETSI ETSI TS 103 374-3 V1.2.1

45、(2017-01)12 Figure 11: Test configuration CF_1Ro1Gm1Mw Figure 12: Test configuration CF_1Ro1Gm1Ic Figure 13: Test configuration CF_1Ro1Isc TS SUT Gm CTFs UE TS OCF Ro IBCF Ic TS SUT CTFs TS OCF Ro S-CSCF Isc ETSI ETSI TS 103 374-3 V1.2.1 (2017-01)13 Figure 14: Test configuration CF_2Ro1Gm1Mw 4.2.3 I

46、nterconnection of TS and SUT 4.2.3.1 Rf interface 4.2.3.1.1 CDF Role Figures 15 and 16 show the interconnection of TS and SUT in terms of signalling message flows. Diameter messages are transferred over the DIAMP port. port:DIAMPCTFport: CTF_RfSUTCDFmap(p_diameterComponent_ctf:DIAMP, system:CTF_Rf);

47、TSFigure 15: Interconnection for CDF role ETSI ETSI TS 103 374-3 V1.2.1 (2017-01)14 Test System CDF Executable Test Suite TA - Codec SCTP IP stacks SUT - CTF SCTP Diameter Server PCC/QoS rules IP Stacks Rf Port CTF_Rf Figure 16: Interconnection for CDF role 4.2.3.1.2 CTF Role Figures 17 to 19 show t

48、he interconnection of TS and SUT in terms of signalling message flows. Diameter messages are transferred over the DIAMP port. Some tests may require additional triggering via the Gm or Mw ports. The configuration can be enabled or disabled by using PIXIT parameter “SIPsupport“. port:DIAMPCDFport: CD

49、F_RfSUTCTFmap(p_diameterComponent_cdf:DIAMP, system:CDF_Rf);TSFigure 17: Interconnection for CTF role ETSI ETSI TS 103 374-3 V1.2.1 (2017-01)15 port:DIAMPCDFport: CDF_RfSUTCTFmap(p_diameterComponent_cdf:DIAMP, system:CDF_Rf);map(p_diameterComponent_ueSIPP, system:UE_Gm);map(p_diameterComponent_cscf:SIPP, system:CSCF_Mw);UEport:SIPPport: UE_GmCSCFport:SIPPport: CSCF_MwTSFigure 18: Interconnection for CTF role with Gm and Mw interfaces port:DIAMPCDFport: CDF_RfSUTCTFmap(p_diameterComponent_cdf:DIAMP,