1、 ETSI TS 103 410-2 V1.1.1 (2017-01) SmartM2M; Smart Appliances Extension to SAREF; Part 2: Environment Domain TECHNICAL SPECIFICATION ETSI ETSI TS 103 410-2 V1.1.1 (2017-01)2 Reference DTS/SmartM2M-103410-2-SAREF4EN Keywords data sharing, IoT, M2M, ontology, SAREF, smart appliance ETSI 650 Route des
2、 Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/s
3、tandards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in con
4、tents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of statu
5、s. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Co
6、pyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. T
7、he copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2017. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of
8、 ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 103 410-2 V1.1.1 (2017-01)3 Contents Intellectual Property Rights 4g3Foreword . 4g3Modal verbs terminology 4g31 Scop
9、e 5g32 References 5g32.1 Normative references . 5g32.2 Informative references 5g33 Definitions and abbreviations . 5g33.1 Definitions 5g33.2 Abbreviations . 6g34 SAREF4ENVI ontology and semantics . 6g34.1 Introduction 6g34.2 SAREF4ENVI 7g34.2.1 General overview 7g34.2.2 Physical Object Hierarchy 8g3
10、4.2.3 Devices and Measurements. 9g34.2.4 Devices . 11g34.2.5 Systems and Physical Objects . 12g34.2.6 Photometers 15g34.2.7 Lampposts, Light Points and Light . 15g34.3 Observations about SAREF4ENVI 17g3Annex A (informative): Approach 18g3Annex B (informative): Bibliography . 19g3History 20g3ETSI ETS
11、I TS 103 410-2 V1.1.1 (2017-01)4 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI S
12、R 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no inv
13、estigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Spec
14、ification (TS) has been produced by ETSI Technical Committee Smart Machine-to-Machine communications (SmartM2M). The present document is part 2 of a multi-part deliverable covering SmartM2M; Smart Appliances Extension to SAREF, as identified below: Part 1: “Energy Domain“; Part 2: “Environment Domai
15、n“; Part 3: “Building Domain“. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provi
16、sions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 103 410-2 V1.1.1 (2017-01)5 1 Scope The present document presents the SAREF extension for the environment domain, focused in a light pollution scenario from the STARS4ALL H2020 projec
17、t. 2 References 2.1 Normative references References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the referenced document (in
18、cluding any amendments) applies. Referenced documents which are not found to be publicly available in the expected location might be found at http:/docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long te
19、rm validity The following referenced documents are necessary for the application of the present document. Not applicable. 2.2 Informative references References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, on
20、ly the cited version applies. For non-specific references, the latest version of the referenced document (including any amendments) applies. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referen
21、ced documents are not necessary for the application of the present document but they assist the user with regard to a particular subject area. i.1 ETSI TR 103 411: “SmartM2M; Smart Appliances; SAREF extension investigation“. i.2 Zamorano, J., Garca, C., Gonzlez, R, Gallego, J., Pascual, S., Tapia, C
22、., Nievas, M., Snchez, A., Cardiel, N. Deliverable D4.1. Photometer sensor (prototype). STARS4ALL project. March 30th, 2016. i.3 Variacin espacial, temporal y espectral de la contaminacin lumnica y sus fuentes: Metodologa y resultados. Ph.D. thesis. Universidad Complutense de Madrid. February, 2015.
23、 NOTE: Available at http:/eprints.ucm.es/31436/. 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the following terms and definitions apply: ontology: formal specification of a conceptualization, used to explicit capture the semantics of a certain reality sma
24、rt appliances: devices, which are used in the household, e.g. for performing domestic work, and which have the ability to communicate with each other and which can be controlled via Internet ETSI ETSI TS 103 410-2 V1.1.1 (2017-01)6 3.2 Abbreviations For the purposes of the present document, the foll
25、owing abbreviations apply: ESCP cole Suprieure de Commerce de Paris OM Ontology of units of Measure OWL Web Ontology Language OWL-DL Web Ontology Language Description Logic RDF Resource Description Format RDF-S Resource Description Format Schema SAREF Smart Appliances REFerence ontology TESS Telesco
26、pe Encoder and Sky Sensor TR Technical Report TS Technical Specification WGS84 World Geodetic System 1984 4 SAREF4ENVI ontology and semantics 4.1 Introduction The present document is the technical specification of SAREF4ENVI, an extension of SAREF for the environment domain. The extension was create
27、d in collaboration with domain experts in the field of light pollution currently working in the STARS4ALL European H2020 project (http:/www.stars4all.eu/index.php/lpi/). The STARS4ALL project is composed by partners such as Universidad Politcnica de Madrid, Universidad Complutense de Madrid, ESCP Eu
28、rope, Leibniz Institute of Freshwater Ecology and Inland Fisheries, Instituto de Astrofsica de Canarias, University of Southampton, Europan Crowdfunding Network, and CEFRIEL (Societ Consortile a Responsabilita Limitata). SAREF4ENVI has two main aims: on the one hand, to be the basis for enabling the
29、 use of SAREF in the environment domain and, on the other hand, to exemplify how to enable interoperability between environmental devices in cooperation. SAREF4ENVI is an OWL-DL ontology that extends SAREF with 32 classes (24 defined in SAREF4ENVI and 7 reused from the time, SAREF and geo ontologies
30、), 24 object properties (22 defined in SAREF4ENVI and 2 reused from the SAREF and geo ontologies), 13 data type properties (9 defined in SAREF4ENVI and 4 reused from the SAREF ontology), and 24 individuals (9 defined in SAREF4ENVI and 12 reused from the OM ontology). SAREF4ENVI focuses on extending
31、SAREF for photometers to solve the lack of interoperability between sensors that can measure and share information about light pollution. Such extension involves the following use cases (more details can be found in ETSI TR 103 411 i.1): Use case 1: Monitor light pollution in a city, through the dat
32、a collected by photometers about the magnitude of the light emitted in a given area. Use case 2: Adjust lampposts light intensity due to high pollution, after identifying the most contaminating lampposts and therefore the areas where more energy is being thrown away. Use case 3: Register a photomete
33、r, in which a new collection of photometers is incorporated into an existing sensor network. The prefixes and namespaces used in SAREF4ENVI and along this document are listed in Table 1. ETSI ETSI TS 103 410-2 V1.1.1 (2017-01)7 Table 1: Prefixes and namespaces used within the SAREF4ENVI ontology Pre
34、fix Namespace base (s4envi) https:/w3id.org/def/saref4envi# saref https:/w3id.org/saref# geo http:/www.w3.org/2003/01/geo/wgs84_pos# owl http:/www.w3.org/2002/07/owl# rdf http:/www.w3.org/1999/02/22-rdf-syntax-ns# rdfs http:/www.w3.org/2000/01/rdf-schema# om http:/www.wurvoc.org/vocabularies/om-1.8/
35、 xsd http:/www.w3.org/2001/XMLSchema# 4.2 SAREF4ENVI 4.2.1 General overview A graphical overview of the SAREF4ENVI ontology is provided in Figure 1. In such figure, grey rectangles are used to denote classes created in the ontology while white rectangles denote reused classes. For all the entities,
36、it is indicated whether they are defined in the extension or in other ontologies by the prefix included before their identifier, that is, if the element is defined in SAREF4ENVI there is no prefix added and if the element is reused from another ontology it is indicated by a prefix according to Table
37、 1. Arrows are used represent properties between classes and to represent some RDF, RDF-S and OWL constructs, more precisely: Plain arrows with white triangles represent the rdfs:subClassOf relation between two classes. The origin of the arrow is the class to be declared as subclass of the class at
38、the destination of the arrow. Dashed arrows between two classes indicate a local restriction in the origin class, i.e. that the object property can be instantiated between the classes in the origin and the destination of the arrow. The identifier of the object property is indicated within the arrow.
39、 Dashed arrows with identifiers between stereotype signs (i.e. “) refer to OWL constructs that are applied to some ontology elements, that is, they can be applied to classes or properties depending on the OWL construct being used. Dashed arrows with no identifier are used to represent the rdf:type r
40、elation, indicating that the element in the origin of the arrow is an instance of the class in the destination of the arrow. Datatype properties are denoted by rectangles attached to the classes, in an UML-oriented way. Dashed boxes represent local restrictions in the class, i.e. datatype properties
41、 that can be applied to the class it is attached to. Individuals are denoted by grey rectangles (or white ones in the case of being reused from other ontologies) in which the identifier is underlined. The representation of additional property axioms (functional, inverse functional, transitive, and s
42、ymmetric) that are being used in the diagram is shown in the legend of Figure 1. Clause 4.2.2 to clause 4.2.7 describe the different parts of the SAREF4ENVI extension describing the different conceptual modules of the ontology. ETSI ETSI TS 103 410-2 V1.1.1 (2017-01)8 Figure 1: SAREF4ENVI overview 4
43、.2.2 Physical Object Hierarchy In SAREF4ENVI, the SAREF ontology has been extended with various elements to describe different physical objects, devices, and their characteristics. Apart from extending the saref:Device class with the s4envi:Device class, a hierarchy has been defined also including t
44、he classes s4envi:PhysicalObject, s4envi:System and s4envi:Actuator in the upper levels. In order to represent sensors from the light pollution domain, the classes s4envi:Photometer and s4envi:TESS (a specific type of photometer) have been included extending the hierarchy. Such classes are organized
45、 in the hierarchy shown in Figure 2. ETSI ETSI TS 103 410-2 V1.1.1 (2017-01)9 Figure 2: Physical Object hierarchy 4.2.3 Devices and Measurements Devices and measurements are depicted in Figure 3. This model represents an n-ary pattern that allows users to relate different measurements from a given s
46、ensor for different properties measured in different units. That is, the saref:Measurement class aims at describing a measurement of a physical quantity (using the saref:hasValue property) for a given saref:Property and according to a given saref:UnitOfMeasure. This pattern enables to differentiate
47、between properties and the measurements made for such properties and to store measurements for a concrete property in different units of measurement. Furthermore, it allows adding a timestamp (using the saref:hasTimeStamp property) to identify when the measurement applies to the property, which can
48、be used either for single measurements or for series of measurements (e.g. measurement streams). It is worth noting that this modelling was included in SAREF 2.0 after the SAREF4ENVI extension was developed. This pattern was first included in the SAREF4ENVI and SAREF4BLDG extensions and then propose
49、d to be extrapolated to SAREF 2.0; this explains why the prefix used for this part of the model refers to SAREF instead of to SAREF4ENVI. However, as its origin is in the SAREF4ENVI and SAREF4BLDG extensions requirements and models, the explanations are kept in the present document. ETSI ETSI TS 103 410-2 V1.1.1 (2017-01)10 Figure 3: Sensor and measurement model Table 2 summarizes the restrictions that characterize a saref:Measurement. Table 2: Restrictions of the saref:Measurement class Property Definition saref:hasTimestamp only
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1