ETSI TS 103 497-3-2017 Core Network and Interoperability Testing (INT) S1AP Conformance Testing for the S1-MME interface (3GPP Release 13) Part 3 Abstract Test Suite (ATS) and part_1.pdf

1、 ETSI TS 103 497-3 V1.1.1 (2017-07) Core Network and Interoperability Testing (INT); S1AP Conformance Testing for the S1-MME interface; (3GPP Release 13); Part 3: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) pro forma specification floppy3TECHNI

2、CAL SPECIFICATION ETSI ETSI TS 103 497-3 V1.1.1 (2017-07)2 Reference DTS/INT-00135-3 Keywords ATS, conformance, PIXIT, S1AP ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non luc

3、ratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the

4、present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific networ

5、k drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors

6、in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except

7、as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. ETSI 2017. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo a

8、re trademarks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are trademarks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members. GSM and the GSM logo are trademarks registered and owned

9、by the GSM Association. ETSI ETSI TS 103 497-3 V1.1.1 (2017-07)3 Contents Intellectual Property Rights 4g3Foreword . 4g3Modal verbs terminology 4g31 Scope 5g32 References 5g32.1 Normative references . 5g32.2 Informative references 6g33 Definitions and abbreviations . 6g33.1 Definitions 6g33.2 Abbrev

10、iations . 6g34 Abstract Test Method (ATM) . 6g34.1 Introduction 6g34.2 Test architecture . 6g34.2.1 Test method 6g35 ATS conventions 7g35.1 Introduction 7g35.2 Testing conventions 7g35.2.1 Test cases Preamble and Postamble 7g35.3 Naming conventions . 7g35.3.1 General guidelines 7g35.3.2 Test case gr

11、ouping 8g35.3.3 Test case identifiers 8g3Annex A (normative): S1AP S1-MME Partial PIXIT pro forma 9g3A.1 The right to copy 9g3A.2 Identification summary. 9g3A.3 ATS summary 9g3A.4 Test laboratory 9g3A.5 Client identification 9g3A.6 SUT 10g3A.7 Protocol layer information 10g3A.7.1 Protocol identifica

12、tion 10g3A.8 PIXIT items 10g3A.8.1 Introduction 10g3A.8.2 Port and Address items . 10g3A.8.3 LibCommon items 11g3A.8.4 LibS1AP items . 11g3Annex B (normative): S1AP S1-MME Abstract Test Suite (ATS) 13g3B.1 The TTCN-3 Module 13g3History 14g3ETSI ETSI TS 103 497-3 V1.1.1 (2017-07)4 Intellectual Proper

13、ty Rights Essential patents IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property

14、Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches

15、, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Trademarks The present document may include trademarks and/or

16、tradenames which are asserted and/or registered by their owners. ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does not c

17、onstitute an endorsement by ETSI of products, services or organizations associated with those trademarks. Foreword This Technical Specification (TS) has been produced by ETSI Technical Committee Core Network and Interoperability Testing (INT). The present document is part 3 of a multi-part deliverab

18、le. Full details of the entire series can be found in part 1 2. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal

19、forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 103 497-3 V1.1.1 (2017-07)5 1 Scope The present document specifies the Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information

20、 for Testing (PIXIT) pro forma for the test specification for the S1AP protocol on the S1-MME interface as specified in ETSI TS 136 413 1 in compliance with the relevant requirements and in accordance with the relevant guidance given in ISO/IEC 9646-7 6 and ETSI ETS 300 406 7. The test notation used

21、 in the ATS is TTCN-3 (see ETSI ES 201 873-1 8). The following test specification and design considerations can be found in the body of the present document: the overall test suite structure; the testing architecture; the test methods and port definitions; the test configurations; TTCN styles and co

22、nventions; the partial PIXIT pro forma; the modules containing the TTCN-3 ATS. Annex A provides the Partial Implementation Extra Information for Testing (PIXIT) Pro forma. Annex B provides the Abstract Test Suite (ATS) part of the ATS. 2 References 2.1 Normative references References are either spec

23、ific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the referenced document (including any amendments) applies. Referenced documents which are not

24、 found to be publicly available in the expected location might be found at https:/docbox.etsi.org/Reference/. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents are necessary for

25、 the application of the present document. 1 ETSI TS 136 413 (V13.4.0): “LTE; Evolved Universal Terrestrial Radio Access Network (E-UTRAN); S1 Application Protocol (S1AP) (3GPP TS 36.413 version 13.4.0 Release 13)“. 2 ETSI TS 103 497-1: “Core Network and Interoperability Testing (INT); S1AP Conforman

26、ce Testing for the S1-MME interface; (3GPPTM Release 13); Part 1: Protocol Implementation Conformance Statement (PICS)“. 3 ETSI TS 103 497-2: “Core Network and Interoperability Testing (INT); S1AP Conformance Testing for the S1-MME interface; (3GPPTM Release 13); Part 2: Test Suite Structure (TSS) a

27、nd Test Purposes (TP)“. 4 ISO/IEC 9646-1: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 1: General concepts“. 5 ISO/IEC 9646-6: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Par

28、t 6: Protocol profile test specification“. ETSI ETSI TS 103 497-3 V1.1.1 (2017-07)6 6 ISO/IEC 9646-7: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 7: Implementation Conformance Statements“. 7 ETSI ETS 300 406: “Methods for testing and

29、Specification (MTS); Protocol and profile conformance testing specifications; Standardization methodology“. 8 ETSI ES 201 873-1: “Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 1: TTCN-3 Core Language“. 9 ETSI TS 136 304: “LTE; Evolved Universal Te

30、rrestrial Radio Access (E-UTRA); User Equipment (UE) procedures in idle mode (3GPP TS 36.304)“. 10 ETSI TS 123 003: “Digital cellular telecommunications system (Phase 2+) (GSM); Universal Mobile Telecommunications System (UMTS); Numbering, addressing and identification (3GPP TS 23.003)“. 2.2 Informa

31、tive references References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the referenced document (including any amendments) a

32、pplies. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents are not necessary for the application of the present document but they assist the user with regard to a particular subj

33、ect area. Not applicable. 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in ISO/IEC 9646-7 6 and ETSI TS 136 413 1 apply. 3.2 Abbreviations For the purposes of the present document, the abbreviations given in ISO/IEC 9646-1 4

34、, ISO/IEC 9646-6 5, ISO/IEC 9646-7 6 and ETSI TS 136 413 1 apply. 4 Abstract Test Method (ATM) 4.1 Introduction This clause describes the ATM used to test the S1AP protocol on the S1-MME interface at the eNB and MME side. 4.2 Test architecture 4.2.1 Test method Void. ETSI ETSI TS 103 497-3 V1.1.1 (2

35、017-07)7 5 ATS conventions 5.1 Introduction The ATS conventions are intended to give a better understanding of the ATS but they also describe the conventions made for the development of the ATS. These conventions shall be considered during any later maintenance or further development of the ATS. The

36、 ATS conventions contain two clauses, the testing conventions and the naming conventions. The naming conventions describe the structure of the naming of all ATS elements. To define the ATS, the guidelines of the document ETSI ETS 300 406 7 were considered. 5.2 Testing conventions 5.2.1 Test cases Pr

37、eamble and Postamble As described in the test method clause the test tool shall behave as an eNB when the IUT is an MME and shall behave as an MME when the IUT is an eNB. For that reason the test case preambles and postambles are named as follows: IUT is an S1AP/eNB (example TC_S1AP_eNB_RAB_01) f_cf

38、_S1AP_eNB_Up f_cf_Down IUT is a S1AP/MME (example TC_S1AP_MME_RAB_01) f_cf_S1AP_MME_Up f_cf_Down 5.3 Naming conventions 5.3.1 General guidelines The naming conventions are based on the following underlying principles: In most cases, identifiers should be prefixed with a short alphabetic string (spec

39、ified in table 1) indicating the type of TTCN-3 element it represents. Suffixes should not be used except in those specific cases identified in table 2. Prefixes and suffixes should be separated from the body of the identifier with an underscore (“_“). EXAMPLE 1: c_sixteen, t_wait_max. Only module n

40、ames, data type names and module parameters should begin with an upper-case letter. All other names (i.e. the part of the identifier following the prefix) should begin with a lower-case letter. The start of second and subsequent words in an identifier should be indicated by capitalizing the first ch

41、aracter. Underscores should not be used for this purpose. EXAMPLE 2: f_send_Location_Reporting_Control. Table 1 specifies the naming guidelines for each element of the TTCN-3 language indicating the recommended prefix, suffixes (if any) and capitalization. ETSI ETSI TS 103 497-3 V1.1.1 (2017-07)8 Ta

42、ble 1: TTCN-3 naming convention Language element Naming convention Prefix Suffix Example Notes Module Use upper-case initial letter LibS1AP_ none LibS1AP_Interface TSS grouping Use all upper-case letters none none S1AP_eNB_RABMessage template Use lower-case initial letter m_ none m_E_RABSetupRequest

43、 Message template with wildcard or matching expression Use lower-case initial letters mw_ none mw_servedGUMMEIsItem Port instance Use upper-case initial letter none none S1APPort Constant Use lower-case initial letter c_ none c_maxRetransmission Function Use lower-case initial letter f_ none f_recv_

44、S1AP_PDU() Altstep Use lower-case initial letter a_ none a_receive() Variable Use lower-case initial letter v_ none v_basicIdPICS values Use all upper case letters PICS_ none PICS_S1AP_MME_IUT See note PIXIT values Use all upper case letters PX_ none PX_S1AP_MME_ETS_PORT See note Parameterization Us

45、e lower-case initial letter p_ none p_servedPLMNs Enumerated Value Use lower-case initial letter e_ none e_preambleNOTE: In this case it is acceptable to use underscore as a word delimiter. 5.3.2 Test case grouping The ATS structure is based on the Test Purposes for the S1AP protocol on the S1-MME i

46、nterface as defined in ETSI TS 103 497-2 3. 5.3.3 Test case identifiers The test cases have been divided according to the functionalities into several groups. The test case names are built up according to the following scheme. Table 2: TC identifier naming convention scheme Identifier: _ = Test Case

47、: fixed to “TC“ Interface: S1AP = type of IUT: eNB or MME = group RAB E-RAB management MNP Management procedure STP CDMA2000 tunneling etc. = sequential number (01 to 99) NOTE: This naming scheme results into a one-to-one correspondence between the test purpose identifiers as defined in ETSI TS 103

48、497-2 3 and the test case identifiers. The TP identifier of the test case TC_xxx_01 is TP_xxx_01. ETSI ETSI TS 103 497-3 V1.1.1 (2017-07)9 Annex A (normative): S1AP S1-MME Partial PIXIT pro forma A.1 The right to copy Notwithstanding the provisions of the copyright clause related to the text of the

49、present document, ETSI grants that users of the present document may freely reproduce the Partial PIXIT pro forma in this annex so that it can be used for its intended purposes and may further publish the completed Partial PIXIT. The PIXIT Pro forma is based on ISO/IEC 9646-6 5. Any additional information which may be needed can be found in this international standard document. A.2 Identification summary Table A.1 PIXIT Number: Test Laboratory Name: Date of Issue: Issued to: A.3 ATS summary