ETSI TS 122 011-2016 Digital cellular telecommunications system (Phase 2+) (GSM) Universal Mobile Telecommunications System (UMTS) LTE Service accessibility (V13 6 0 3GPP TS 22 011.pdf

1、 ETSI TS 1Digital cellular telecoUniversal Mobile TelSer(3GPP TS 22.0TECHNICAL SPECIFICATION122 011 V13.5.0 (2016communications system (Phaelecommunications System (LTE; ervice accessibility .011 version 13.5.0 Release 1316-04) hase 2+); (UMTS); 13) ETSI ETSI TS 122 011 V13.5.0 (2016-04)13GPP TS 22.

2、011 version 13.5.0 Release 13Reference RTS/TSGS-0122011vd50 Keywords GSM,LTE,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Gras

3、se (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified wit

4、hout the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of

5、the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to

6、 one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The con

7、tent of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2016. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade

8、Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 122 011 V13.5.0 (2016-04)2

9、3GPP TS 22.011 version 13.5.0 Release 13Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in

10、 ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy,

11、 no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technic

12、al Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI d

13、eliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be i

14、nterpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 122 011 V13.5.0 (2016-04)33GPP TS 22.011 version 13.5.0 Release 13Contents In

15、tellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 5g31 Scope 6g31.1 References 6g31.2 Definitions and abbreviations . 6g32 Roaming . 8g32.1 General requirements . 8g32.2 International roaming . 8g32.3 National roaming 8g32.4 Roaming in shared networks 8g33 Provisions

16、for providing continuity of service . 9g33.1 Location registration. 9g33.2 Network selection . 9g33.2.1 General 9g33.2.2 Procedures. 9g33.2.2.1 General 9g33.2.2.2 At switch-on or recovery from lack of coverage . 10g33.2.2.3 User reselection . 12g33.2.2.4 Mobile Station reactions to indications of se

17、rvice restriction from the network . 13g33.2.2.4.1 “Permanent“ PLMN restriction 13g33.2.2.4.2 “Partial“ and “temporary“ PLMN restrictions . 13g33.2.2.4.3 PLMN restrictions for PS services 13g33.2.2.5 Periodic network selection attempts 14g33.2.2.6 Investigation PLMN Scan . 14g33.2.2.7 Void. 14g33.2.

18、2.8 Steering Of Roaming. 14g33.2.3 Network selection for Multi-mode terminals with 3GPP Capability 15g34 Access control 16g34.1 Purpose . 16g34.2 Allocation . 16g34.3 Operation 16g34.3.1 Access Class Barring 16g34.3.2 Service Specific Access Control . 17g34.3.3 Access Control for CSFB . 18g34.3.4 Ex

19、tended Access Barring 18g34.3.4.1 General 18g34.3.4.2 Overriding extended access barring 19g34.3.5 Application specific Congestion control for Data Communication (ACDC) . 19g34.3.5.1 Service description 19g34.3.5.2 Requirements 20g34.3.5.2.1 General 20g34.3.5.2.2 ACDC Categories 20g34.4 Emergency Ca

20、lls 21g34.4a Multimedia Priority Service . 21g34.5 Control of UE Capabilities . 21g34.6 Prevention of mobile-originating signalling and/or data traffic . 22g35 Support of Localised Service Area (SoLSA) . 22g35.1 Network selection . 22g35.2 The Idle-mode operation 22g35.2.1 Subscriber moving from a n

21、ormal environment to his localised service area. 22g3ETSI ETSI TS 122 011 V13.5.0 (2016-04)43GPP TS 22.011 version 13.5.0 Release 135.2.2 Subscriber moving away from his localised service area to a normal environment. 23g35.2.3 Subscriber staying in his localised service area 23g35.3 LSA only access

22、 . 23g35.4 Exclusive access . 23g35.5 Preferential access 23g36 Support of 3GPP - WLAN Interworking . 23g36.1 Void 24g36.2 Void 24g36.3 Void 24g37 Administrative restriction of subscribers“ access . 24g37.1 Allowed Location and Routing Area identities access . 24g37.2 Void 24g38 Support of Home Node

23、B and Home E-NodeB 24g3Annex A (informative): Change history . 25g3History 29g3ETSI ETSI TS 122 011 V13.5.0 (2016-04)53GPP TS 22.011 version 13.5.0 Release 13Foreword This Technical Specification has been produced by the 3GPP. The contents of the present document are subject to continuing work withi

24、n the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG fo

25、r information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have

26、 been incorporated in the document. ETSI ETSI TS 122 011 V13.5.0 (2016-04)63GPP TS 22.011 version 13.5.0 Release 131 Scope The purpose of this TS is to describe the service access procedures as presented to the user. Definitions and procedures are provided in this TS for international roaming, natio

27、nal roaming and regionally provided service. These are mandatory in relation to the technical realization of the Mobile Station (UE). 1.1 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are either

28、specific (identified by date of publication, edition number, version number, etc.) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-s

29、pecific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 Void 2 3GPP TR 21.905: “Vocabulary for 3GPP Specifications“. 3 3GPP TS 23.122: “Non Access Stratum functions related to Mobile Station (MS) in idle mode“. 4 ITU-T Recommendation

30、Q.1001: “General aspects of Public Land Mobile Networks“. 5 3GPP TS 22.043: “Support of Localised Service Area (SoLSA). Stage 1“. 6 3GPP TS 22.234: “Requirements on 3GPP system to wireless local area network (WLAN) interworking“. 7 3GPP TS 22.101: “Service aspects; Service principles“. 8 3GPP TS 22.

31、278: “Service requirements for the Evolved Packet System (EPS)“. 9 3GPP TS 36.304: “User Equipment (UE) procedures in idle mode“ 10 3GPP TS25.304: “User Equipment (UE) procedures in idle mode and procedures for cell reselection in connected mode“. 11 3GPP TS 25.304: “User Equipment (UE) procedures i

32、n idle mode and procedures for cell reselection in connected mode. 12 3GPP TS 36.304: “Evolved Universal Terrestrial Radio Access (E-UTRA); User Equipment (UE) procedures in idle mode“. 13 3GPP TS 36.331: “E-UTRA Radio Resource Control (RRC)“. 14 3GPP TS 22.220: “Service requirements for Home NodeBs

33、 and Home eNodeBs“. 15 3GPP2 C.S0004-A v6.0: “Signaling Link Access Control (LAC) Standard for cdma2000 Spread Spectrum Systems Addendum 2“ 16 3GPP TS 22.153: “Multimedia priority service“. 1.2 Definitions and abbreviations In addition to those below, abbreviations used in this 3GPP TS are listed in

34、 3GPP TR 21.905 2. ETSI ETSI TS 122 011 V13.5.0 (2016-04)73GPP TS 22.011 version 13.5.0 Release 13PLMN A Public Land Mobile Network (PLMN) is a network established and operated by an Administration or RPOA for the specific purpose of providing land mobile communication services to the public. It pro

35、vides communication possibilities for mobile users. For communications between mobile and fixed users, interworking with a fixed network is necessary. A PLMN may provide service in one, or a combination, of frequency bands. As a rule, a PLMN is limited by the borders of a country. Depending on natio

36、nal regulations there may be more than one PLMN per country. A relationship exists between each subscriber and his home PLMN (HPLMN). If communications are handled over another PLMN, this PLMN is referred to as the visited PLMN (VPLMN). PLMN Area The PLMN area is the geographical area in which a PLM

37、N provides communication services according to the specifications to mobile users. In the PLMN area, the mobile user can set up calls to a user of a terminating network. The terminating network may be a fixed network, the same PLMN, another PLMN or other types of PLMN. Terminating network users can

38、also set up calls to the PLMN. The PLMN area is allocated to a PLMN. It is determined by the service and network provider in accordance with any provisions laid down under national law. In general the PLMN area is restricted to one country. It can also be determined differently, depending on the dif

39、ferent telecommunication services, or type of UE. If there are several PLMNs in one country, their PLMN areas may overlap. In border areas, the PLMN areas of different countries may overlap. Administrations will have to take precautions to ensure that cross border coverage is minimized in adjacent c

40、ountries unless otherwise agreed. Note 1: ITU-T Recommendation Q.1001 4 does not contain a definition of the PLMN area. System Area The System Area is defined as the group of PLMN areas accessible by UEs. Interworking of several PLMNs and interworking between PLMNs and fixed network(s) permit public

41、 land mobile communication services at international level. Note 2: The System Area according to 4 Recommendation Q.1001 corresponds to the System Area. Service Area The Service Area is defined in the same way as the Service Area according to ITU-T Recommendation Q.1001 4. In contrast to the PLMN ar

42、ea it is not based on the coverage of a PLMN. Instead it is based on the area in which a fixed network user can call a mobile user without knowing his location. The Service Area can therefore change when the signalling system is being extended, for example. Regionally Provided Service Regionally Pro

43、vided Service is defined as a service entitlement to only certain geographical part(s) of a PLMN, as controlled by the network operator. Localised Service Area (LSA) The localised service area concept shall give the operator a basis to offer subscribers different services (e.g. tariffs or access rig

44、hts) depending on the location of the subscriber. A LSA consists of a cell or a number of cells within a PLMN. (3GPP TS 22.043 5). Tracking Area: E-UTRAN utilises Tracking Areas (TA) for UE access control, location registration, paging and mobility management. The TA is independent of Location Areas

45、 (LA) and Routing Areas (RA). A TA comprises one or more E-UTRA cells Service requirements for E-UTRAN are specified in 3GPP TS 22.278 8. ETSI ETSI TS 122 011 V13.5.0 (2016-04)83GPP TS 22.011 version 13.5.0 Release 132 Roaming 2.1 General requirements A UE with a valid IMSI may roam and access servi

46、ce in the area authorized by the entitlement of the subscription. If a communication has been established, the UE will in principle not suffer an interruption within the PLMN area (provided the entitlement of the subscription allows it). Exceptions are possible if no network resources or radio cover

47、age are available locally. However, if the UE leaves the PLMN area, an established communication may terminate. If the user then wants to continue, another network providing service has to be selected and a new communication has to be established (see clause 3). Subject to roaming agreements, a visi

48、ted network shall be able to prevent incoming roamers from using a particular radio access technology (e.g. when the home network has not implemented this radio access technology). 2.2 International roaming International roaming is a service whereby an UE of a given PLMN is able to obtain service fr

49、om a PLMN of another country. The availability of International Roaming is subject to inter-PLMN agreements. 2.3 National roaming National Roaming is a service whereby an UE of a given PLMN is able to obtain service from another PLMN of the same country, anywhere, or on a regional basis. The availability of National Roaming depends on the home PLMN of the requesting UE and the visited PLMN; it does not depend on subscription arrangements. 2.4 Roaming in shared networks The following requirements are applicable to GERAN,