ETSI TS 122 022-2016 Digital cellular telecommunications system (Phase 2+) Universal Mobile Telecommunications System (UMTS) LTE Personalisation of Mobile Equipment (ME) Mobile fun.pdf

1、 ETSI TS 1Digital cellular telecoUniversal Mobile TelPersonalisatioMobile fu(3GPP TS 22.0TECHNICAL SPECIFICATION122 022 V13.0.0 (2016communications system (Phaelecommunications System (LTE; tion of Mobile Equipment (ME)functionality specification .022 version 13.0.0 Release 1316-02) hase 2+); (UMTS)

2、; E); 13) ETSI ETSI TS 122 022 V13.0.0 (2016-02)13GPP TS 22.022 version 13.0.0 Release 13Reference RTS/TSGS-0122022vd00 Keywords GSM,LTE,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Assoc

3、iation but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or prin

4、t versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on

5、 a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find

6、 errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm

7、 except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2016. All rights reser

8、ved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by

9、the GSM Association. ETSI ETSI TS 122 022 V13.0.0 (2016-02)23GPP TS 22.022 version 13.0.0 Release 13Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly ava

10、ilable for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web ser

11、ver (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may beco

12、me, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be

13、 interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “n

14、eed not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 122 022 V13.0.0 (

15、2016-02)33GPP TS 22.022 version 13.0.0 Release 13Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 5g31 Scope 6g32 References 6g33 Definitions and abbreviations . 7g33.1 Abbreviations . 7g33.2 Definitions 7g34 General description. 8g35 Network personalisati

16、on . 9g35.1 Network personalisation . 9g35.1.1 Operation of network personalised ME 9g35.1.2 Network personalisation cycle 9g35.1.2.1 Personalisation cycle . 9g35.1.2.2 De-personalisation cycle . 10g35.2 Network subset personalisation 10g35.2.1 Operation of Network subset personalised ME 10g35.2.2 N

17、etwork subset personalisation cycle . 11g35.2.2.1 Personalisation Cycle 11g35.2.2.2 De-personalisation cycle . 11g36 SP personalisation 12g36.1 Operation of SP personalised MEs . 12g36.2 SP personalisation cycle . 12g36.2.1 Personalisation cycle. 12g36.2.2 De-personalisation cycle . 13g37 Corporate

18、personalisation . 13g37.1 Operation of corporate personalised MEs 13g37.2 Corporate personalisation cycle . 14g37.2.1 Personalisation cycle. 14g37.2.2 De-personalisation cycle . 14g38 SIM/USIM personalisation. 15g38.1 Operation of SIM/USIM personalised ME . 15g38.2 SIM/USIM personalisation cycle . 1

19、5g38.2.1 Personalisation cycle. 15g38.2.2 De-personalisation cycle . 16g39 Over the air de-personalisation cycle . 16g310 Disable Personalisation 17g311 Manufacturer personalisation and de-personalisation 17g312 Automatic personalisation 18g313 Personalisation Cycle Restrictions . 18g314 Security. 1

20、8g3Annex A (normative): Technical information . 20g3A.1 GID1 and GID2 files 20g3ETSI ETSI TS 122 022 V13.0.0 (2016-02)43GPP TS 22.022 version 13.0.0 Release 13A.2 Emergency calls only mode . 20g3A.3 Co-operative Network List . 21g3A.4 Over-the-air de-personalisation 21g3Annex B (informative): Change

21、 history . 23g3History 24g3ETSI ETSI TS 122 022 V13.0.0 (2016-02)53GPP TS 22.022 version 13.0.0 Release 13Foreword This Technical Specification has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and ma

22、y change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2

23、 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporat

24、ed in the document. ETSI ETSI TS 122 022 V13.0.0 (2016-02)63GPP TS 22.022 version 13.0.0 Release 131 Scope The present document provides functional specifications of five features to personalise Mobile Equipment (ME) for GSM and 3G systems. These features are called: - Network personalisation; - Net

25、work subset personalisation; - Service Provider (SP) personalisation; - Corporate personalisation; - SIM/USIM personalisation (SIM for GSM systems or USIM for 3G systems). The present document specifies requirements for MEs which provide these personalisation features. 2 References The following doc

26、uments contain provisions which, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. For a specific reference, subsequent revisions do not apply. For a

27、 non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP TR 21.905: “Vocabulary for 3GPP Specifi

28、cations“. 2 3GPP TS 22.011: “Service accessibility“. 3 3GPP TS 23.003: “ Numbering, addressing and identification“. 4 3GPP TS 23.122: “Non-Access-Stratum (NAS) functions related to Mobile Station (MS) in idle mode“. 5 3GPP TS 23.038: “Alphabets and language-specific information“. 6 3GPP TS 23.040: “

29、Technical realization of the Short Message Service (SMS); Point-to-Point (PP)“. 7 GSM 11.11: “Digital cellular telecommunications system (Phase 2+); Specification of the Subscriber Identity Module - Mobile Equipment (SIM - ME) interface“. 8 GSM 11.14: “Digital cellular telecommunications system (Pha

30、se 2+); Specification of the SIM Application Toolkit for the Subscriber Identity Module - Mobile Equipment (SIM - ME) interface“. 9 3GPP TS 31.102: “Characteristics of the USIM application“. 10 3GPP TS 31.111: “USIM Application Tool Kit“. ETSI ETSI TS 122 022 V13.0.0 (2016-02)73GPP TS 22.022 version

31、 13.0.0 Release 133 Definitions and abbreviations 3.1 Abbreviations For the purposes of the present document, the following abbreviations apply: CCK Corporate Control Key CNL Co-operative Network List GID1 Group Identifier (level 1) GID2 Group Identifier (level 2) EF Elementary FileIMEI Internationa

32、l Mobile Equipment Identity IMSI International Mobile Subscriber Identity MCC Mobile Country Code ME Mobile EquipmentMS GSM Mobile Station (ME + SIM) MNC Mobile Network Code NCK Network Control Key NSCK Network Subset Control Key PCK Personalisation Control KeySIM Subscriber Identity Module SMS Shor

33、t Message Service SP Service Provider SPCK Service Provider Control Key TMSI Temporary Mobile Subscriber Identity UE 3G User Equipment (ME + USIM) USIM User Services Identity Module Further GSM abbreviations are given in TS 21.905 1. 3.2 Definitions For the purposes of the present document, the foll

34、owing definitions apply: corporate personalisation: Allows a corporate customer to personalise MEs that he provides for his employees or customers use so that they can only be used with the companys own SIM/USIMs. de-personalisation: Is the process of deactivating the personalisation so that the ME

35、ceases to carry out the verification checks. network personalisation: Allows the network operator to personalise a ME so that it can only be used with that particular network operators SIM/USIMs network subset personalisation: A refinement of network personalisation, which allows network operators t

36、o limit the usage of a ME to a subset of SIM/USIMs normal mode of operation: Is the mode of operation into which the ME would have gone if it had no personalisation checks to process. personalisation: Is the process of storing information in the ME and activating the procedures which verify this inf

37、ormation against the corresponding information stored in the SIM/USIM whenever the ME is powered up or a SIM/USIM is inserted, in order to limit the SIM/USIMs with which the ME will operate. SIM/USIM personalisation: Enables a user to personalise a ME so that it may only be used with particular SIM/

38、USIM(s). SP personalisation: Allows the service provider to personalise a ME so that it can only be used with that particular service providers SIM/USIMs. user: Normally refers to the person performing the personalisation or de-personalisation operations and may represent a network operator, service

39、 provider, manufacturer of the user/owner of the handset, depending on the context. ETSI ETSI TS 122 022 V13.0.0 (2016-02)83GPP TS 22.022 version 13.0.0 Release 13network code: MCC and MNC. network subset code: digits 6 and 7 of the IMSI. SP code: code which when combined with the network code refer

40、s to a unique SP. The code is provided in the GID1 file on the SIM/USIM (see Annex A.1.) and is correspondingly stored on the ME. Corporate code: code which when combined with the network and SP codes refers to a unique Corporate. The code is provided in the GID2 file on the SIM/USIM (see Annex A.1.

41、) and is correspondingly stored on the ME. SIM/USIM code: code which when combined with the network and NS codes refers to a unique SIM/USIM. The code is provided by the digits 8 to 15 of the IMSI network code group: same as network code network subset code group: combination of a network subset cod

42、e and the associated network code. SP code group: combination of the SP code and the associated network code. Corporate code group: combination of the Corporate code and the associated SP and network codes. SIM/USIM code group: combination of the SIM/USIM code and the associated network subset and n

43、etwork codes (it is equivalent to the IMSI). Personalisation entity: Network, network subset, SP, Corporate or SIM/USIM to which the ME is personalised 4 General description The personalisation features work by storing information in the ME which limits the IMs with which it will operate, and by che

44、cking this information against the SIM/USIM whenever the ME is powered up or a SIM/USIM is inserted. If a check fails, the ME enters the “limited service state“ in which only emergency calls can be attempted (see annex A.2). There are five personalisation categories of varying granularity; network,

45、network subset, SP, corporate and SIM/USIM. The personalisation categories are independent in so far as each category can be activated or de-activated regardless of the status of the others. Each category has a separate personalisation indicator to show whether it is active or not. The ME can be per

46、sonalised to one network, one network subset, one SP, one Corporate, one SIM/USIM or any combination thereof. The ME may optionally be personalised to multiple networks, network subsets, SPs, Corporates, IMs or any combinations thereof. The codes used for each personalisation category are shown in T

47、able 1. Some categories require several codes (e.g. SP and network for SP personalisation) and each combination of codes relating to a particular entity (network, SP etc.) is referred to as a code group. To personalise to multiple entities, multiple code groups are stored in the ME. For each activat

48、ed personalisation category, the ME retrieves the relevant codes from the SIM/USIM and checks the retrieved code group against the (list of) code group(s) stored in the ME. If a match is found with any of the code groups stored in the ME, the check is passed for that category. If checks for all acti

49、ve categories are passed, then the MS goes into normal operation. Table 1: Codes used by each personalisation category Code Network (MCC, MNC) Network Subset (IMSI digits 6 and 7) SP Corporate SIM/USIM (IMSI digits 8 to 15) Personalisation category Network checkbld Network subset checkbld checkbld SP checkbld checkbld Corporate checkbld checkbld checkbld SIM/USIM checkbld checkbld checkbld ETSI ETSI TS 122 022 V13.0.0 (2016-02)93GPP TS 22.022 version 13.0.0 Release 13Precautions must be taken to ensure that when more than one personalisatio