ETSI TS 122 034-2018 Digital cellular telecommunications system (Phase 2+) (GSM) Universal Mobile Telecommunications System (UMTS) High Speed Circuit Switched Data (HSCSD) Stage 1 .pdf

1、 ETSI TS 122 034 V15.0.0 (2018-07) Digital cellular telecommunications system (Phase 2+) (GSM); Universal Mobile Telecommunications System (UMTS); High Speed Circuit Switched Data (HSCSD); Stage 1 (3GPP TS 22.034 version 15.0.0 Release 15) TECHNICAL SPECIFICATION GLOBAL SYSTEM FOR MOBILE COMMUNICATI

2、ONSRETSI ETSI TS 122 034 V15.0.0 (2018-07)13GPP TS 22.034 version 15.0.0 Release 15Reference RTS/TSGS-0122034vf00 Keywords GSM,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but

3、 non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions

4、 of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specifi

5、c network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find

6、 errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm

7、 except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. ETSI 2018. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETS

8、I logo are trademarks of ETSI registered for the benefit of its Members. 3GPPTM and LTETMare trademarks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members. GSMand the GSM logo are trademarks registered an

9、d owned by the GSM Association. ETSI ETSI TS 122 034 V15.0.0 (2018-07)23GPP TS 22.034 version 15.0.0 Release 15Intellectual Property Rights Essential patents IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information pertaining to these essentia

10、l IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates ar

11、e available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) wh

12、ich are, or may be, or may become, essential to the present document. Trademarks The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners. ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and

13、 conveys no right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks. Foreword This Technical Specification (TS) has been produced b

14、y ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between

15、GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of

16、the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 122 034 V15.0.0 (2018-07)33GPP TS 22.034 version 15.0.0 Release 15Contents Intellectual Property Rights 2g3Foreword .

17、2g3Modal verbs terminology 2g3Foreword . 5g31 Scope 6g32 References 6g33 Abbreviations and definitions 6g33.1 Abbreviations . 6g33.2 Definitions 6g34 Description . 7g34.1 General . 7g34.2 Applicability . 7g34.3 General Bearer Services . 7g34.4 Parameters to be indicated and negotiated . 7g34.4.1 Cal

18、l set-up . 7g34.4.1.1 T services 8g34.4.1.2 NT services . 8g34.4.2 Network initiated modification . 8g34.4.2.1 T services 8g34.4.2.2 NT services . 8g34.4.3 User initiated modification . 8g34.4.3.1 T services 8g34.4.3.2 NT services . 8g34.5 Air Interface Resource Allocation 9g34.5.1 Minimum GERAN Air

19、 Interface Resource Allocation and Allocation Increment . 9g34.5.2 Flexible Air Interface Resource Allocation 9g34.6 Symmetric and asymmetric connections 9g34.6.1 Symmetric connections . 9g34.6.2 Asymmetric connections. 9g34.6.2.1 Asymmetric air interface connection 9g34.6.2.2 Channel coding asymmet

20、ry . 9g34.6.3 Network choice of connection symmetry . 10g34.7 User Equipment/Mobile Equipment requirements . 10g34.8 Mobility Management 10g34.9 Roaming . 10g34.10 Quality of Service . 10g34.10.1 Bit error rate 10g34.10.1.1 GERAN TCH/F Bit Error Rate . 10g34.10.1.2 Overall GBS Bit Error Rate 10g34.1

21、0.2 GERAN Radio resource management 10g34.10.3 Call set-up delay . 10g34.10.4 End-to-end delay . 10g34.10.5 Throughput . 11g34.10.6 Network planning and interference levels 11g34.11 Mapping of FNUR to GERAN TCH/F for T services 11g34.12 Mapping of GERAN AIUR to GERAN TCH/F for NT services . 11g34.13

22、 GBS MMI aspects 11g34.14 GBS Subscription aspects 11g34.15 GBS charging aspects . 11g34.16 O and M aspects . 11g34.17 Multislot security aspects . 12g35 Exceptional procedures or unsuccessful outcome 12g36 Interworking requirements . 12g3ETSI ETSI TS 122 034 V15.0.0 (2018-07)43GPP TS 22.034 version

23、 15.0.0 Release 156.1 Service interworking 12g36.1.1 Interworking with supplementary services . 12g36.1.2 Interworking with other services 12g36.2 Network interworking 12g3Annex A (informative): Change history . 13g3History 14g3ETSI ETSI TS 122 034 V15.0.0 (2018-07)53GPP TS 22.034 version 15.0.0 Rel

24、ease 15Foreword This Technical Specification has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document,

25、 it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control.

26、y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TS 122 034 V15.0.0 (2018-07)63GPP TS 22.034 version 15.0.0 Release 15

27、1 Scope The present document specifies the Stage 1 description of High Speed Circuit Switched Data (HSCSD). HSCSD is a feature that introduce General Bearer Services and a multislot mechanism is used for user rates that can be achieved with one or more TCH/F. Multislot also defines a flexible use of

28、 air interface resources which makes efficient and flexible use of higher user rates feasible. The Multislot mechanism is only applicable to GERAN. At UTRAN radio access parameters used for GBS user data are specified at TS 23.107. 2 References The following documents contain provisions which, throu

29、gh reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest ve

30、rsion applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP TR 21.905: “Vocabulary for 3GPP Specifications“. 2 3GPP TS 22.002: “Bearer Se

31、rvices (BS) supported by a Public Land Mobile Network (PLMN)“. 3 3GPP TS 22.004: “General on supplementary services“. 4 3GPP TS 405.002: “ Multiplexing and multiple access on the radio path“. 3 Abbreviations and definitions 3.1 Abbreviations For the purposes of the present document, the following ab

32、breviations apply: AIUR Air Interface User Rate EDGE Enhanced Data rates for GSM Evolution FNUR Fixed Network User Rate GBS General Bearer Services GERAN GSM/EDGE radio access network HSCSD High Speed Circuit Switched Data MO Mobile Originated MT Mobile TerminatedNT Non Transparent T Transparent UE

33、User Equipment (same as MS in GSM specifications) Additional abbreviations can be found in TS 22.905 1. 3.2 Definitions For the purposes of the present document, the following terms and definitions apply: Fixed Network User Rate: user rate between IWF and the fixed network. Air Interface User Rate:

34、user rate between Mobile Termination and IWF. For T services it is the maximum possible AIUR not including padding. For NT services it is the maximum possible AIUR. ETSI ETSI TS 122 034 V15.0.0 (2018-07)73GPP TS 22.034 version 15.0.0 Release 15maximum possible GERAN AIUR: highest possible GERAN AIUR

35、 that the multiple TCH/F can provide, e.g. 2 TCH/F using TCH/F9.6 provides a maximum possible AIUR of 19,2 kbit/s. padding: fill bits needed to adapt the maximum possible AIUR supported by a given number of TCH/F with a given channel coding to a FNUR that is lower than the maximum possible AIUR. 4 D

36、escription 4.1 General HSCSD is a feature that introduce General Bearer Services (GBS) and a multislot mechanism is used for user rates that can be achieved with one or more TCH/F. HSCSD also defines mechanisms for the use of air interface resources which makes efficient and flexible use of higher u

37、ser rates feasible. The Multislot mechanism is only applicable to GERAN. 4.2 Applicability GBS shall provide flexible ways of supporting GSM Phase 2, T and NT data services and new data services at the higher rates. Data compression shall be applicable to NT GBS. Supplementary Services applicable to

38、 the General Bearer Services are specified at TS 22.004, 3. 4.3 General Bearer Services The General Bearer Services are defined in TS 22.002 2. The General Bearer Services (GBS) consist of two Bearer Services, and they are as follows: - asynchronous; - synchronous. 4.4 Parameters to be indicated and

39、 negotiated 4.4.1 Call set-up The parameters to be indicated, and negotiated, if applicable, during the call set-up shall include: - FNUR; - GERAN Channel coding(s) acceptable (for the call); - maximum number of GERAN TCH/F (that the mobile user can accept); - wanted AIUR (desired rate that the mobi

40、le user wants the network to allocate). The wanted AIUR is applicable to NT services only; - indication if the user initiated modification is required, and if so, the network resource needs; - channel coding asymmetry indication. Some of the parameters are only utilised by GERAN. When UTRAN radio ac

41、cess bearer is allocated the values are ignored. The GERAN channel coding(s) acceptable shall be indicated by the mobile at call set-up and is not negotiable. It indicates the GERAN channel coding(s) that may be chosen by the network for the call. The maximum number of GERAN TCH/F shall be indicated

42、 at call set-up. It enables the mobile user to limit the number of GERAN TCH/F used and thus to control an essential parameter for charging. It sets the upper limit of number of TCH/F that the network may allocate to the mobile. The wanted AIUR (applicable to NT services only) indicates the AIUR tha

43、t the mobile user wants and which the network shall try to reach but which it is not allowed to exceed. The exception where the network is allowed to exceed the wanted AIUR is when the network can achieve the GERAN AIUR with a lower number of TCH/F, e.g. wanted ETSI ETSI TS 122 034 V15.0.0 (2018-07)

44、83GPP TS 22.034 version 15.0.0 Release 15GERAN AIUR indicated by the mobile is 14,4 kbit/s, GERAN channel codings acceptable are both TCH/F9.6 and TCH/F4.8 and maximum number of TCH/F are 3, then the network shall choose 2 x 9,6 over 3 x 4,8 if a channel coding of TCH/F9.6 is available on two TCH/F.

45、 If the user wishes to make use of the user initiated modification procedure, this shall be indicated at the call set-up. It shall be possible to reserve a different FNUR than the AIUR. Channel coding asymmetry indication is only applicable to NT calls where the user has indicated acceptance for cha

46、nnel coding(s) based on enhanced modulation. In this case the user may indicate preference for channel coding symmetry, downlink biased channel coding asymmetry, or uplink biased channel coding asymmetry. The channel coding asymmetry indication is only applicable in direction UE to network. 4.4.1.1

47、T services The ME or the network may propose to modify the FNUR. The calling entity may accept or release the call. Autobauding is not allowed. The AIUR is always equal to the FNUR. Fax Group 3 can make use of HSCSD. The GERAN channel coding selected must be one of the channel coding(s) indicated in

48、 the channel coding(s) acceptable parameter, the number of TCH/F selected shall not exceed the maximum number of TCH/F parameter, and the combination of the two shall result in an AIUR that is equal to the FNUR. 4.4.1.2 NT services The ME or the network may propose to modify the FNUR. The calling en

49、tity may accept or release the call. Autobauding is allowed. The wanted AIUR is indicated by the mobile at call set-up. 4.4.2 Network initiated modification 4.4.2.1 T services For transparent calls the radio resource parameters must remain within limits that allow the transparent call to maintain it is characteristics of fixed end to end throughput and delay. This means that in GERAN the channel coding and the number of TCH/F used may change during the call as long as a channel coding indicated in the channel coding(s) acceptable parameter is used, the maxi