ETSI TS 122 038-2018 Digital cellular telecommunications system (Phase 2+) (GSM) Universal Mobile Telecommunications System (UMTS) LTE (U)SIM Application Toolkit (USAT) Service des.pdf

1、 ETSI TS 122 038 V15.0.0 (2018-07) Digital cellular telecommunications system (Phase 2+) (GSM); Universal Mobile Telecommunications System (UMTS); LTE; (U)SIM Application Toolkit (USAT); Service description; Stage 1 (3GPP TS 22.038 version 15.0.0 Release 15) TECHNICAL SPECIFICATION ETSI ETSI TS 122

2、038 V15.0.0 (2018-07)13GPP TS 22.038 version 15.0.0 Release 15Reference RTS/TSGS-0122038vf00 Keywords GSM,LTE,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enr

3、egistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present d

4、ocument shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive w

5、ithin ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the pr

6、esent document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as author

7、ized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. ETSI 2018. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are tradem

8、arks of ETSI registered for the benefit of its Members. 3GPPTM and LTETMare trademarks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members. GSMand the GSM logo are trademarks registered and owned by the GS

9、M Association. ETSI ETSI TS 122 038 V15.0.0 (2018-07)23GPP TS 22.038 version 15.0.0 Release 15Intellectual Property Rights Essential patents IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information pertaining to these essential IPRs, if any, i

10、s publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on th

11、e ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may b

12、e, or may become, essential to the present document. Trademarks The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners. ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no right

13、 to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Genera

14、tion Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP a

15、nd ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting

16、 Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 122 038 V15.0.0 (2018-07)33GPP TS 22.038 version 15.0.0 Release 15Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs te

17、rminology 2g3Foreword . 5g31 Scope 6g32 References 6g32.1 Normative references . 7g33 Definitions and abbreviations . 7g33.1 Definitions 7g33.2 Abbreviations . 8g34 Description . 8g35 High level USAT requirements 9g36 SAT/USAT/ME interface requirements . 9g36.1 (U)SAT APIs 9g36.2 USAT proactive capa

18、bility . 10g36.3 ME Capability for support of bearer independent protocol 11g36.4 ME equipped with positioning features 11g37 USAT User Interface requirements 12g37.1 Data presentation requirements (e.g. Display) . 12g37.2 Data acquisition requirements (e.g. Keypad) . 12g37.3 Access requirements (e.

19、g. Menu) . 12g37.4 Menu capability 12g37.4.1 Set up capability . 12g37.4.2 Selection capability . 12g37.5 Soft-key capability . 12g37.6 User control of the SAT/USAT execution environment 12g37.7 MMS presentation requirements 13g38 Network interface requirements . 13g38.1 USAT/Network interaction 13g

20、38.2 Communication control capability . 13g38.3 Service Interworking requirements 13g39 USAT data exchange capabilities requirements . 14g39.1 Data exchange capabilities supported. 14g310 Charging requirements . 14g311 Security requirements . 14g311.1 Secure Environment requirements 15g312 Emergency

21、 calls . 15g313 Roaming . 15g314 Interaction with supplementary services 15g314.1 General . 15g314.2 Line Identification 15g314.2.1 Calling Line Identification Presentation (CLIP) . 15g314.2.2 Calling Line Identification Restriction (CLIR) . 15g314.2.3 Connected Line Identification Presentation (COL

22、P) 15g314.2.4 Connected Line Identification Restriction (COLR) 15g314.3 Call Forwarding 15g314.3.1 Call Forwarding Unconditional (CFU) . 15g314.3.2 Call Forwarding Busy (CFB) 16g3ETSI ETSI TS 122 038 V15.0.0 (2018-07)43GPP TS 22.038 version 15.0.0 Release 1514.3.3 Call Forwarding on No Reply (CFNRy)

23、 . 16g314.3.4 Call Forwarding on Not Reachable (CFNRc) . 16g314.4 Call Completion . 16g314.4.1 Call Hold (CH) . 16g314.4.2 Call Waiting (CW) 16g314.5 Multi Party (MPTY) . 16g314.6 Closed User Group (CUG) . 16g314.7 Advice of Charge (AoC) 16g314.8 Call Barring 16g314.8.1 Barring of all outgoing calls

24、 . 16g314.8.2 Barring of outgoing international calls . 16g314.8.2.1 Mobile originated calls 16g314.8.2.2 Forwarded Calls 16g314.8.3 Barring of outgoing international calls except those directed to the HPLMN country . 16g314.8.4 Barring of all incoming calls. 16g314.8.5 Barring of incoming calls whe

25、n roaming 17g314.9 Explicit Call Transfer (ECT) 17g314.10 Completion of Call to Busy Subscriber (CCBS) 17g314.11 Multiple Subscriber Profile (MSP) . 17g315 Interaction with network features . 17g315.1 Interactions with Operator Determined Barring (ODB) . 17g315.1.1 Barring of all outgoing calls . 17

26、g315.1.2 Barring of all outgoing international calls 17g315.1.3 Barring of all outgoing international calls except those directed to the home PLMN country . 17g315.1.4 Barring of outgoing calls when roaming outside the home PLMN country . 17g315.1.5 Barring of outgoing premium rate calls 17g315.1.6

27、Barring of incoming calls . 17g315.1.7 Barring of incoming calls when roaming outside the home PLMN country 17g315.1.8 Operator Specific Barring . 17g315.1.9 Barring of Supplementary Services Management . 18g315.2 Interactions with Optimal Routing (OR) 18g315.3 Interactions with MExE 18g315.4 Intera

28、ctions with CAMEL 18g316 Compatibility of USAT MEs and applications . 18g316.1 USAT Classification. 18g316.2 ME/USIM operation . 18g316.3 ME/UICC capability information exchange . 19g316.4 ME and compatibility 19g316.5 Void 19g317 Void 19g3Annex A (informative): Change history . 20g3History 22g3ETSI

29、 ETSI TS 122 038 V15.0.0 (2018-07)53GPP TS 22.038 version 15.0.0 Release 15Foreword This Technical Specification has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG a

30、pproval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval;

31、 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI T

32、S 122 038 V15.0.0 (2018-07)63GPP TS 22.038 version 15.0.0 Release 151 Scope This 3GPP Technical Specification defines the stage one description of the USIM application Toolkit (USAT). Stage one is an overall service description, primarily from the subscribers and serving environments points of view,

33、 and does not deal with the details of the human interface itself. This TS includes information applicable to network operators, serving environments and terminal, switch and database manufacturers. This TS contains the core requirements for a USIM application Toolkit (USAT) which are sufficient to

34、provide a complete service. It is highly desirable however, that technical solutions for a USIM application Toolkit (USAT) are sufficiently flexible to allow for possible enhancements. Additional functionalities not documented in this TS may implement requirements which are considered outside the sc

35、ope of this TS. This additional functionality may be on a network-wide basis, nation-wide basis or particular to a group of users. Such additional functionality shall not compromise conformance to the core requirements of the service. MEScope ofthis TSPLMNSAT/USATServer(s)SIM/USIMSAT/USATGSM/UMTSFig

36、ure 1: Scope of this TS As indicated in Figure 1, the scope of this TS encompasses the USAT functionality in the UE (comprising USIM and ME) and the interaction with the PLMN environment. The USAT Server is not necessarily a separate entity as shown in the figure; nodes providing USAT services may a

37、lso exist within the PLMN. The functionalities of the USAT servers (such as charging aspects, security level classification etc.) are not covered by this specification. The requirements are considered to be applicable to both GSM and UMTS systems. 2 References The following documents contain provisi

38、ons which, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. For a specific reference, subsequent revisions do not apply. ETSI ETSI TS 122 038 V15.0.

39、0 (2018-07)73GPP TS 22.038 version 15.0.0 Release 15 For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the presen

40、t document. 2.1 Normative references 1 3GPP TS 31.101: “UICC-Terminal Interface; Physical and Logical Characteristics“. 2 Void. 3 Void. 4 3GPP TS 51.011: “Specification of the Subscriber Identity Module, Mobile Equipment (SIM - ME) interface“ Release 4. 5 Void. 6 Void. 7 3GPP TR 21.905: “Vocabulary

41、for 3GPP Specifications“. 8 Void. 9 Void. 10 Void. 11 Void. 12 Void. 13 Void. 14 3GPP TS 31.111: “USIM Application Toolkit (USAT)“. 15 3GPP TS 31.102: “Characteristics of the USIM Application“. 16 3GPP TS 22.140: “Multimedia Messaging Service (MMS); Stage 1“. 17 3GPP TS 51.014: “Specification of the

42、 SIM Application Toolkit for the Subscriber Identity Module - Mobile Equipment (SIM - ME) interface“ Release 4. 18 ETSI TS 102 240: “UICC Application Programming Interface and Loader Requirements; Service description“ Release 6. 19 3GPP TS 22.071: “Location Services (LCS); Service description; Stage

43、 1“ 3 Definitions and abbreviations 3.1 Definitions For the purposes of this TS the following definitions apply: applet: a small program that is intended not to be run on its own, but rather to be embedded inside another application. application: USAT information in the form of software, application

44、s, associated resources (e.g. libraries) and/or data. bearer independent protocol: Mechanism at the interface between the USIM and the ME which provide access to the data bearers supported by the ME. buffer: A dedicated memory used to temporarily store data to be sent and/or retrieved. content: data

45、 and/or information associated with, or independent of, a particular application which may be presented to or collected from a user. ETSI ETSI TS 122 038 V15.0.0 (2018-07)83GPP TS 22.038 version 15.0.0 Release 15data channel: allow the USIM and the network to exchange data using a selected data exch

46、ange capability. link: radio resource. USAT service: a service enhanced (or made possible) by USAT technology. USAT execution environment: the USAT execution environment provides the mechanisms to operate single or multiple USAT-applications. USAT serving environment: an entity which delivers USAT s

47、ervices to the subscriber. This is normally the PLMN operator, but could be an entity with USAT responsibility (which may have been delegated by the PLMN operator). USAT subscriber: the owner of a PLMN subscription who has entered into an agreement with a USAT serving environment for USAT services.

48、Access to USAT services though other types of networks is out of scope of this specification. USAT server: a node supporting USAT services in the USAT service environment. user: the user of a USAT UE , who may or may not be the subscriber. (U)SIM: SIM and/or USIM. 3.2 Abbreviations For the purposes

49、of this TS the following abbreviations apply: API Application Programming Interface CAMEL Customized Applications for Mobile network Enhanced Logic CS Circuit Switched CSE CAMEL Service Environment IN Intelligent Network ME Mobile Equipment MExE Mobile Execution Environment MMI Man Machine Interface NO Network Operator PLMN Public Land Mobile Network SAT SIM Application Toolkit SCI Subscriber Controlled Input SIM Subscriber Identity Module UE User Equipment USAT USIM Application Toolkit USIM Universal Subscriber Identity Module Fur