ETSI TS 122 042-2017 Digital cellular telecommunications system (Phase 2+) (GSM) Universal Mobile Telecommunications System (UMTS) LTE Network Identity and TimeZone (NITZ) Service .pdf

1、 ETSI TS 122 042 V14.0.0 (2017-03) Digital cellular telecommunications system (Phase 2+) (GSM); Universal Mobile Telecommunications System (UMTS); LTE; Network Identity and TimeZone (NITZ); Service description; Stage 1 (3GPP TS 22.042 version 14.0.0 Release 14) TECHNICAL SPECIFICATION ETSI ETSI TS 1

2、22 042 V14.0.0 (2017-03)13GPP TS 22.042 version 14.0.0 Release 14Reference RTS/TSGS-0122042ve00 Keywords GSM,LTE,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif

3、enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the presen

4、t document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network driv

5、e within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the

6、 present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as aut

7、horized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2017. All rights reserved. DECTTM, P

8、LUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Associ

9、ation. ETSI ETSI TS 122 042 V14.0.0 (2017-03)23GPP TS 22.042 version 14.0.0 Release 14Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETS

10、I members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ip

11、r.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential

12、to the present document. Foreword The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP

13、and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Draftin

14、g Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 122 042 V14.0.0 (2017-03)33GPP TS 22.042 version 14.0.0 Release 14Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs t

15、erminology 2g3Foreword . 4g31 Scope 5g32 References 5g33 Definitions and abbreviations . 5g34 Description . 5g35 Applicability . 6g36 Normal procedure . 6g36.1 Transfer of NITZ information 6g36.2 Use of NITZ information . 7g3Annex A (informative): Change history . 8g3History 9g3ETSI ETSI TS 122 042

16、V14.0.0 (2017-03)43GPP TS 22.042 version 14.0.0 Release 14Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. S

17、hould the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or grea

18、ter indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TS 122 042

19、V14.0.0 (2017-03)53GPP TS 22.042 version 14.0.0 Release 141 Scope The present document describes the feature Network Identity and Timezone (NITZ). This feature provides the means for serving PLMNs to transfer current identity, time, Daylight Saving Time and the local timezone to Mobile Stations (MS)

20、s, and for the MSs to store and use this information. This enhances roaming by permitting accurate indication of PLMN identities that are either newer than the Mobile Equipment (ME) or have changed their name since the ME was sold. Additionally time, Daylight Saving Time and timezone information can

21、 be utilised by MEs as desired. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. For

22、a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the pr

23、esent document. 1 3GPP TR 21.905: “Vocabulary for 3GPP Specifications“. 2 3GPP TS 24.008: “Mobile radio interface layer 3 specification; Core Network Protocols - Stage 3“. 3 3GPP TS 23.038: “Alphabets and Languages“. 3 Definitions and abbreviations In addition to the following definitions, abbreviat

24、ions used in the present document are listed in 3GPP TR 21.905 1. NITZ The feature Network Identity and Timezone as described in the present document. UCS2 Universal Character Set 2 UT Universal Time LTZ Local Time Zone, the offset from UT applying in that locality, including any adjustments for sum

25、mer time, etc. DST Daylight Saving Time. Adjustment for summer time. 4 Description The feature Network Identities and Timezone shall make it possible for a serving PLMN to transfer its current identity, universal time, DST and LTZ to MSs, and for the MS to store and use this information. Each one of

26、 these elements is optional. The feature significantly enhances roaming as itenables the accurate indication of network identities that are either newer than the ME or have changed their name since the ME was manufactured or sold. Additionally time and timezone information can be utilised by MEs as

27、desired. When using the default character set (see 3GPP TS 23.038 3), the serving PLMN shall make both a “short“ and a “long“ name available to the MS. As an alternative or, in addition, to the default character set, the serving PLMN can make a name available in UCS2. The MS shall be free to choose

28、one of these names depending upon its own characteristics and/or limitations, such as those of its display. NOTE: Guidance is sought, particularly from non-European operators, as to whether long and short name is required in UCS2 format. ETSI ETSI TS 122 042 V14.0.0 (2017-03)63GPP TS 22.042 version

29、14.0.0 Release 14The Network Operator may change the network identity at any time. However the change of network identity need not force immediate transfer of information to the MS. As a network option, it shall be possible to send universal time (UT) by the network. Time information shall include:

30、Year, Month, Day, Hour, Minute, Second, Timezone and DST. The expected accuracy of the time information is in the order of minutes. NOTE: Universal time indicates the time at which this information element (see 3GPP TS 24.008 2) may have been sent by the network. Thus it can be assumed that the accu

31、racy of the time information when it arrives at the MS is usually within a couple minutes. The serving PLMN shall make Local Time Zone (LTZ) available to the MS as an offset from Universal Time in units of 15 minutes. When the LTZ is compensated for DST (summertime), the serving PLMN shall provide a

32、 DST parameter to indicate this. The adjustment for DST can be +1h or +2h. For PLMNs which cover more than one timezone, it is assumed that the Network Operator will arrange for boundaries between subsets of the PLMN service area to be approximately aligned with timezone boundaries. When an MS chang

33、es Local Time Zone the PLMN is not required to immediately transfer new time zone information. Similarly the PLMN will transfer the LTZ changes arising from summer/winter adjustments when convenient to the network operator. The MS will implement the new time zone information at an appropriate time f

34、ollowing receipt. The information passed to MSs supporting the NITZ feature is controlled by the serving PLMN Operator through administrative interaction. The interface necessary to support this administrative interaction is outside the scope of the present document. 5 Applicability Network Identity

35、 and Timezone is both an optional network feature and an optional MS feature. The NITZ feature is not intended to replace the existing method of PLMN Indication, nor is it intended to discharge the administration and maintenance of the associated MoU Permanent Document, SE13. 6 Normal procedure 6.1

36、Transfer of NITZ information Network name, time, DST and timezone information can be transferred from the serving PLMN to the MS: 1) Upon registering on the network. 2) When the MS geographically relocates to a different Local Time Zone. 3) When the network changes its Local Time Zone, e.g. between

37、summer and winter time. 4) When the network changes its identity. 5) At any time during a signalling connection with mobile station. Transfer of relevant information shall not unduly consume scarce network resources. ETSI ETSI TS 122 042 V14.0.0 (2017-03)73GPP TS 22.042 version 14.0.0 Release 146.2

38、Use of NITZ information Relevant information shall be presented to the MS user at the earliest opportunity. It is expected that the MS will display the most up to date information transferred to it. Switching off the MS should not cause the updated name of the network(s) to be deleted. Removal of th

39、e SIM/USIM should not cause the updated name of the network(s) to be deleted. However, the number of different network identities retained in the ME is a manufacturer issue. Usage of time information in MS is a ME manufacturer issue. For example, time information can be utilised to time stamp transa

40、ctions for logging purposes. ETSI ETSI TS 122 042 V14.0.0 (2017-03)83GPP TS 22.042 version 14.0.0 Release 14Annex A (informative): Change history Change history TSG SA# SA Doc. SA1 Doc Spec CR Rev Rel Cat Subject/Comment Old New Work Item June 1999 GSM 02.42 Transferred to 3GPP SA1 8.0.0 SA#04 22.04

41、2 3.0.0 SA#05 22.042 001 Editorial update of references for GSM/3GPP use. 3.0.0 3.0.1 SP-11 SP-010065 S1-010258 22.042 Rel-4 Transferred to 3GPP Release 4 3.0.1 4.0.0 SP-15 SP-020045 S1-020457 22.042 003 - Rel-4 F Editorial CR to correct terms and references 4.0.0 4.1.0 TEI SP-16 SP-020267 S1-021043

42、 22.042 Rel-5 Updated from Rel-4 to Rel5 4.1.0 5.0.0 SP-20 SP-030241 S1-030378 22.042 005 - Rel-5 A Alignment of TS 22.042 (NITZ) with implementation in TS 24.008 5.0.0 5.1.0 TEI5 SP-26 SP-040744 S1-040997 22.042 Rel-6 Updated from Rel-5 to Rel-6 5.1.0 6.0.0 SP-36 22.042 Rel-7 Updated from Rel-6 to

43、Rel-7 6.0.0 7.0.0 SP-42 - - Rel-8 Updated from Rel-7 to Rel-8 7.0.0 8.0.0 SP-46 - - - - - - - Updated to Rel-9 by MCC 8.0.0 9.0.0 2011-03 - - - - - - - Update to Rel-10 version (MCC) 9.0.0 10.0.0 2012-09 - - - - - - - Update to Rel-11 version (MCC) 10.0.0 11.0.0 2014-10 - - - - - - - Update to Rel-12 version (MCC) 11.0.0 12.0.0 2015-12 Update to Rel-13 version (MCC) 12.0.0 13.0.0 2017-03 - - - - - - - Updated to Rel-14 by MCC 13.0.0 14.0.0 ETSI ETSI TS 122 042 V14.0.0 (2017-03)93GPP TS 22.042 version 14.0.0 Release 14History Document history V14.0.0 March 2017 Publication