ETSI TS 122 060-2016 Digital cellular telecommunications system (Phase 2+) Universal Mobile Telecommunications System (UMTS) General Packet Radio Service (GPRS) Service description.pdf

1、 ETSI TS 1Digital cellular telecoUniversal Mobile TelGeneral PacSer(3GPP TS 22.0TECHNICAL SPECIFICATION122 060 V13.0.0 (2016communications system (Phaelecommunications System (acket Radio Service (GPRS); ervice description; Stage 1 .060 version 13.0.0 Release 13GLOBAL SYSTEMOBILE COMMUN16-01) hase 2

2、+); (UMTS); 13) TEM FOR ICATIONSRETSI ETSI TS 122 060 V13.0.0 (2016-01)13GPP TS 22.060 version 13.0.0 Release 13Reference RTS/TSGS-0122060vd00 Keywords GSM,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 0001

3、7 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any ele

4、ctronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (P

5、DF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/sta

6、tus.asp If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photoco

7、pying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 201

8、6. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks regis

9、tered and owned by the GSM Association. ETSI ETSI TS 122 060 V13.0.0 (2016-01)23GPP TS 22.060 version 13.0.0 Release 13Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if a

10、ny, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available

11、on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or

12、may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identiti

13、es. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “sho

14、uld not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI T

15、S 122 060 V13.0.0 (2016-01)33GPP TS 22.060 version 13.0.0 Release 13Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 5g31 Scope 6g32 References 6g33 Definitions and abbreviations . 7g33.1 Definitions 7g33.2 Abbreviations . 9g34 Main Concepts 10g35 Service

16、Requirements . 11g35.1 GPRS reference model . 11g35.1.1 Bearer services 11g35.1.2 (Void) 11g35.1.3 (Void) 11g35.2 Network Interworking 11g35.2.1 Interworking with other data networks and other PLMNs 12g35.2.1.1 QoS when Interworking 12g35.2.2 GPRS Numbering Plan . 12g35.2.3 Addressing and routeing r

17、equirements . 12g35.2.3.1 PTP network layer services . 12g35.2.4 Interworking for subscriber roaming 12g35.3 GPRS service description . 12g35.3.1 Point-To-Point Connectionless Network Service (PTP-CLNS) . 13g35.3.2 (Void) 13g35.3.3 Point-To-Multipoint (PTM) service overview 13g35.4 Service interwork

18、ing 14g35.5 Transfer Characteristics 14g35.6 Service characteristics 15g35.6.1 Subscriber profile 15g35.6.2 Quality of Service (QoS) 15g35.6.2.1 QoS parameter definitions . 15g35.6.2.1.1 Service precedence (priority) . 15g35.6.2.1.2 Reliability 15g35.6.2.1.3 Delay . 16g35.6.2.1.4 Throughput 16g35.6.

19、2.2 QoS profile - PTP 17g35.6.2.3 Monitor . 17g35.6.3 Packet size 17g36 Operational Requirements 17g36.1 GPRS UE Modes of Operation. 17g36.1.1 GPRS UE classes . 17g36.1.2 UE support for SMS over GPRS 19g36.2 Subscriber roaming. 19g36.3 Construction of GPRS subscriber numbers 19g36.4 Battery life ext

20、ension 19g36.5 Format Of Message User Data . 19g36.6 Charging aspects 20g36.6.1 PTP and IP-M charging information . 20g36.6.2 Reverse Charging 20g36.7 Security services . 20g3ETSI ETSI TS 122 060 V13.0.0 (2016-01)43GPP TS 22.060 version 13.0.0 Release 136.8 Message Screening . 21g36.9 GPRS Operator

21、Determined Barring 21g37 Normal procedures with successful outcome . 21g37.1 Provision 21g37.2 Withdrawal . 22g37.3 GPRS-Attach, GPRS-Detach . 22g37.4 Registration 22g37.5 Void 23g37.6 Interrogation . 23g37.7 Activation . 23g37.8 De-activation 23g37.9 Invocation and operation 23g37.10 PIN and Passwo

22、rd Management . 24g38 Exceptional procedures 24g38.1 Provision 24g38.2 Withdrawal . 24g38.3 Registration 24g38.4 Void 24g38.5 Interrogation . 24g38.6 Activation . 25g38.7 De-activation 25g38.8 Invocation and operation 25g38.9 PIN and Password management . 25g39 Addressing 25g39.1 Point to Point serv

23、ices 25g39.2 Point to Multipoint services 25g39.3 Overview 25g3Annex A (informative): Change history . 26g3History 27g3ETSI ETSI TS 122 060 V13.0.0 (2016-01)53GPP TS 22.060 version 13.0.0 Release 13Foreword This Technical Specification has been produced by the 3rdGeneration Partnership Project (3GPP

24、). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release date and an increase in version numb

25、er as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, upd

26、ates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TS 122 060 V13.0.0 (2016-01)63GPP TS 22.060 version 13.0.0 Release 131 Scope This TS defines the stage one description of the General Packet Radio Service (GPRS). Stage one is an

27、 overall service description, primarily from the service subscribers and users points of view, but does not deal with the details of the human interface itself. This TS includes information applicable to network operators, service providers and terminal, switch and data base manufacturers. This TS c

28、ontains the core requirements for the packet switched networks specified by 3GPP which are sufficient to provide a complete service. It defines a set of bearer services that provide packet mode transmission within the PLMN and interwork with external networks. The term GPRS shall be used in this doc

29、ument to refer the GPRS service offered via GERAN and UTRAN and the PS Domain of the 3G PLMN. The GPRS shall not prevent the users operation of other 3GPP services. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present doc

30、ument. References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (inclu

31、ding a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP TS 22.001: “ Principles of telecommunication services supported by a Public Land Mobile Network (PLMN)“. 2 3GPP TS 24.002: “ Public Land Mobile

32、Network (PLMN) access reference configuration“. 3 ISO 8348: “Information processing systems - data communications - network service definition“. 4 Internet STD 5:RFC 791: Internet protocol, RFC 950: “Internet standard subnetting procedure“, RFC 919: “Broadcasting internet datagrams“, RFC 922: “Broad

33、casting internet datagrams in the presence of subnets“, RFC 792: “Internet control message protocol“, RFC 1112: “Host extensions for IP multicasting“ RFC 1122:“ Requirements for Internet hosts - communication layers“. RFC 1920:“ Internet official protocol standards“, RFC 1458: “Requirements for mult

34、icast protocols“, RFC 1301: “Multicast transport protocol“. 5 3GPP TS22.004: “ General on supplementary services“. 6 3GPP TS 22.030: “ Man-Machine Interface (MMI) of the User Equipment (UE)“ 7 3GPP TS 42.017 : “Subscriber Identity Modules (SIM) Functional characteristics“. 8 3GPP TS 22.041: “Operato

35、r Determined Barring (ODB)“ 9 3GPP TS 27.060: “General Packet Radio Service (GPRS); Mobile Station (MS) supporting GPRS“. 10 3GPP TS 43.055: Dual Transfer Mode; Stage 2“ ETSI ETSI TS 122 060 V13.0.0 (2016-01)73GPP TS 22.060 version 13.0.0 Release 133 Definitions and abbreviations 3.1 Definitions For

36、 the purposes of this 3GPP TS the following definitions apply: A access delay: The value of elapsed time between an access request and a successful access (source: ITU-T X.140). accuracy: A performance criterion that describes the degree of correctness with which a function is performed. (The functi

37、on may or may not be performed with the desired speed.) (source: ITU-T I.350). B bearer service: A type of telecommunication service that provides the capability for the transmission of signals between user-network interfaces (source: ITU-T I.112). C conversational service: An interactive service wh

38、ich provides for bi-directional communication by means of real-time (no store-and-forward) end-to-end information transfer from user to user (source: ITU-T I.113). D destination user: Entity to which calls to the General Packet Radio Service (GPRS) are directed. F G I interactive service: A service

39、which provides the means for bi-directional exchange of information between users. Interactive services are divided into three classes of services: conversational services, messaging services and retrieval services (source: ITU-T I.113). interface: The common boundary between two associated systems

40、(source: ITU-T I.112). M mean bit rate: A measure of throughput. The average (mean) bit rate available to the user for the given period of time (source: ITU-T I.210). messaging service: An interactive service which offers user-to-user communication between individual users via storage units with sto

41、re-and-forward, mailbox and/or message handling, (e.g., information editing, processing and conversion) functions (source: ITU-T I.113). mobile termination: The part of the UE which terminates the radio transmission to and from the network and adapts terminal equipment capabilities to those of the r

42、adio transmission multicast service: A unidirectional PTM service in which a message is transmitted from a single source entity to multiple destinations. multipoint: A value of the service attribute “communication configuration“, which denotes that the communication involves more than two network te

43、rminations (source: ITU-T I.113). N network operator: Entity which provides the network operating elements and resources for the execution of the General Packet Radio Service (GPRS). ETSI ETSI TS 122 060 V13.0.0 (2016-01)83GPP TS 22.060 version 13.0.0 Release 13network service data unit (NSDU): A un

44、it of data passed between the user and the GPRS network across a Network Service Access Point (NSAP). network termination: A functional group on the network side of a user-network interface (source: ITU-T I.112). O P packet: An information unit identified by a label at layer 3 of the OSI reference m

45、odel (source: ITU-T I.113). A network protocol data unit (NPDU). packet data protocol (PDP): Any protocol which transmits data as discrete units known as packets, e.g., IP. packet transfer mode: Also known as packet mode. A transfer mode in which the transmission and switching functions are achieved

46、 by packet oriented techniques, so as to dynamically share network transmission and switching resources between a multiplicity of connections (source: ITU-T I.113). PLMN Operator: Public Land Mobile Network operator. The entity which offers a GPRS. point-to-multipoint (PTM) service: A service type i

47、n which data is sent to all service subscribers or a pre-defined subset of all subscribers within an area defined by the Service Requester. point-to-point (PTP): A value of the service attribute “communication configuration“, which denotes that the communication involves only two network termination

48、s. point-to-point (PTP) service: A service type in which data is sent from a single network termination to another network termination. protocol: A formal set of procedures that are adopted to ensure communication between two or more functions within the within the same layer of a hierarchy of funct

49、ions (source: ITU-T I.112). protocol data unit (PDU): In the reference model for OSI, a unit of data specified in an (N)-protocol layer and consisting of (N)-protocol control information and possibly (N)-user data (source: ITU-T X.200 / ISO-IEC 7498-1). push service: service type which delivers information (data/multimedia) initiated from a network (which may be external to the PLMN) to the UE. The service will cause a PDP context to be activated if needed. Q quality of service: The collective effect of service performances which determine the d