ETSI TS 122 060-2017 Digital cellular telecommunications system (Phase 2+) (GSM) Universal Mobile Telecommunications System (UMTS) General Packet Radio Service (GPRS) Service descr.pdf

1、 ETSI TS 122 060 V14.0.0 (2017-03) Digital cellular telecommunications system (Phase 2+) (GSM); Universal Mobile Telecommunications System (UMTS); General Packet Radio Service (GPRS); Service description; Stage 1 (3GPP TS 22.060 version 14.0.0 Release 14) TECHNICAL SPECIFICATION GLOBAL SYSTEM FOR MO

2、BILE COMMUNICATIONSRETSI ETSI TS 122 060 V14.0.0 (2017-03)13GPP TS 22.060 version 14.0.0 Release 14Reference RTS/TSGS-0122060ve00 Keywords GSM,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C

3、 Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/o

4、r print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version k

5、ept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.

6、aspx If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopyi

7、ng and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2017.

8、All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks register

9、ed and owned by the GSM Association. ETSI ETSI TS 122 060 V14.0.0 (2017-03)23GPP TS 22.060 version 14.0.0 Release 14Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any,

10、 is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on

11、the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may

12、 be, or may become, essential to the present document. Foreword The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross refe

13、rence between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in

14、clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 122 060 V14.0.0 (2017-03)33GPP TS 22.060 version 14.0.0 Release 14Contents Intellectual Property Rights

15、2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 5g31 Scope 6g32 References 6g33 Definitions and abbreviations . 7g33.1 Definitions 7g33.2 Abbreviations . 9g34 Main Concepts 10g35 Service Requirements . 11g35.1 GPRS reference model . 11g35.1.1 Bearer services 11g35.1.2 (Void) 11g35.1.3 (Void)

16、11g35.2 Network Interworking 11g35.2.1 Interworking with other data networks and other PLMNs 12g35.2.1.1 QoS when Interworking 12g35.2.2 GPRS Numbering Plan . 12g35.2.3 Addressing and routeing requirements . 12g35.2.3.1 PTP network layer services . 12g35.2.4 Interworking for subscriber roaming 12g35

17、.3 GPRS service description . 12g35.3.1 Point-To-Point Connectionless Network Service (PTP-CLNS) . 13g35.3.2 (Void) 13g35.3.3 Point-To-Multipoint (PTM) service overview 13g35.4 Service interworking 14g35.5 Transfer Characteristics 14g35.6 Service characteristics 15g35.6.1 Subscriber profile 15g35.6.

18、2 Quality of Service (QoS) 15g35.6.2.1 QoS parameter definitions . 15g35.6.2.1.1 Service precedence (priority) . 15g35.6.2.1.2 Reliability 15g35.6.2.1.3 Delay . 16g35.6.2.1.4 Throughput 16g35.6.2.2 QoS profile - PTP 17g35.6.2.3 Monitor . 17g35.6.3 Packet size 17g36 Operational Requirements 17g36.1 G

19、PRS UE Modes of Operation. 17g36.1.1 GPRS UE classes . 17g36.1.2 UE support for SMS over GPRS 19g36.2 Subscriber roaming. 19g36.3 Construction of GPRS subscriber numbers 19g36.4 Battery life extension 19g36.5 Format Of Message User Data . 19g36.6 Charging aspects 20g36.6.1 PTP and IP-M charging info

20、rmation . 20g36.6.2 Reverse Charging 20g36.7 Security services . 20g36.8 Message Screening . 21g3ETSI ETSI TS 122 060 V14.0.0 (2017-03)43GPP TS 22.060 version 14.0.0 Release 146.9 GPRS Operator Determined Barring 21g37 Normal procedures with successful outcome . 21g37.1 Provision 21g37.2 Withdrawal

21、. 22g37.3 GPRS-Attach, GPRS-Detach . 22g37.4 Registration 22g37.5 Void 23g37.6 Interrogation . 23g37.7 Activation . 23g37.8 De-activation 23g37.9 Invocation and operation 23g37.10 PIN and Password Management . 24g38 Exceptional procedures 24g38.1 Provision 24g38.2 Withdrawal . 24g38.3 Registration 2

22、4g38.4 Void 24g38.5 Interrogation . 24g38.6 Activation . 25g38.7 De-activation 25g38.8 Invocation and operation 25g38.9 PIN and Password management . 25g39 Addressing 25g39.1 Point to Point services 25g39.2 Point to Multipoint services 25g39.3 Overview 25g3Annex A (informative): Change history . 26g

23、3History 27g3ETSI ETSI TS 122 060 V14.0.0 (2017-03)53GPP TS 22.060 version 14.0.0 Release 14Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may chang

24、e following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presen

25、ted to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in t

26、he document. ETSI ETSI TS 122 060 V14.0.0 (2017-03)63GPP TS 22.060 version 14.0.0 Release 141 Scope This TS defines the stage one description of the General Packet Radio Service (GPRS). Stage one is an overall service description, primarily from the service subscribers and users points of view, but

27、does not deal with the details of the human interface itself. This TS includes information applicable to network operators, service providers and terminal, switch and data base manufacturers. This TS contains the core requirements for the packet switched networks specified by 3GPP which are sufficie

28、nt to provide a complete service. It defines a set of bearer services that provide packet mode transmission within the PLMN and interwork with external networks. The term GPRS shall be used in this document to refer the GPRS service offered via GERAN and UTRAN and the PS Domain of the 3G PLMN. The G

29、PRS shall not prevent the users operation of other 3GPP services. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication, edition number, version n

30、umber, etc.) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that docu

31、ment in the same Release as the present document. 1 3GPP TS 22.001: “ Principles of telecommunication services supported by a Public Land Mobile Network (PLMN)“. 2 3GPP TS 24.002: “ Public Land Mobile Network (PLMN) access reference configuration“. 3 ISO 8348: “Information processing systems - data

32、communications - network service definition“. 4 Internet STD 5:RFC 791: Internet protocol, RFC 950: “Internet standard subnetting procedure“, RFC 919: “Broadcasting internet datagrams“, RFC 922: “Broadcasting internet datagrams in the presence of subnets“, RFC 792: “Internet control message protocol

33、“, RFC 1112: “Host extensions for IP multicasting“ RFC 1122:“ Requirements for Internet hosts - communication layers“. RFC 1920:“ Internet official protocol standards“, RFC 1458: “Requirements for multicast protocols“, RFC 1301: “Multicast transport protocol“. 5 3GPP TS22.004: “ General on supplemen

34、tary services“. 6 3GPP TS 22.030: “ Man-Machine Interface (MMI) of the User Equipment (UE)“ 7 3GPP TS 42.017 : “Subscriber Identity Modules (SIM) Functional characteristics“. 8 3GPP TS 22.041: “Operator Determined Barring (ODB)“ 9 3GPP TS 27.060: “General Packet Radio Service (GPRS); Mobile Station

35、(MS) supporting GPRS“. 10 3GPP TS 43.055: Dual Transfer Mode; Stage 2“ ETSI ETSI TS 122 060 V14.0.0 (2017-03)73GPP TS 22.060 version 14.0.0 Release 143 Definitions and abbreviations 3.1 Definitions For the purposes of this 3GPP TS the following definitions apply: A access delay: The value of elapsed

36、 time between an access request and a successful access (source: ITU-T X.140). accuracy: A performance criterion that describes the degree of correctness with which a function is performed. (The function may or may not be performed with the desired speed.) (source: ITU-T I.350). B bearer service: A

37、type of telecommunication service that provides the capability for the transmission of signals between user-network interfaces (source: ITU-T I.112). C conversational service: An interactive service which provides for bi-directional communication by means of real-time (no store-and-forward) end-to-e

38、nd information transfer from user to user (source: ITU-T I.113). D destination user: Entity to which calls to the General Packet Radio Service (GPRS) are directed. F G I interactive service: A service which provides the means for bi-directional exchange of information between users. Interactive serv

39、ices are divided into three classes of services: conversational services, messaging services and retrieval services (source: ITU-T I.113). interface: The common boundary between two associated systems (source: ITU-T I.112). M mean bit rate: A measure of throughput. The average (mean) bit rate availa

40、ble to the user for the given period of time (source: ITU-T I.210). messaging service: An interactive service which offers user-to-user communication between individual users via storage units with store-and-forward, mailbox and/or message handling, (e.g., information editing, processing and convers

41、ion) functions (source: ITU-T I.113). mobile termination: The part of the UE which terminates the radio transmission to and from the network and adapts terminal equipment capabilities to those of the radio transmission multicast service: A unidirectional PTM service in which a message is transmitted

42、 from a single source entity to multiple destinations. multipoint: A value of the service attribute “communication configuration“, which denotes that the communication involves more than two network terminations (source: ITU-T I.113). N network operator: Entity which provides the network operating e

43、lements and resources for the execution of the General Packet Radio Service (GPRS). ETSI ETSI TS 122 060 V14.0.0 (2017-03)83GPP TS 22.060 version 14.0.0 Release 14network service data unit (NSDU): A unit of data passed between the user and the GPRS network across a Network Service Access Point (NSAP

44、). network termination: A functional group on the network side of a user-network interface (source: ITU-T I.112). O P packet: An information unit identified by a label at layer 3 of the OSI reference model (source: ITU-T I.113). A network protocol data unit (NPDU). packet data protocol (PDP): Any pr

45、otocol which transmits data as discrete units known as packets, e.g., IP. packet transfer mode: Also known as packet mode. A transfer mode in which the transmission and switching functions are achieved by packet oriented techniques, so as to dynamically share network transmission and switching resou

46、rces between a multiplicity of connections (source: ITU-T I.113). PLMN Operator: Public Land Mobile Network operator. The entity which offers a GPRS. point-to-multipoint (PTM) service: A service type in which data is sent to ”all service subscribers or a pre-defined subset of all subscribers” within

47、 an area defined by the Service Requester. point-to-point (PTP): A value of the service attribute “communication configuration“, which denotes that the communication involves only two network terminations. point-to-point (PTP) service: A service type in which data is sent from a single network termi

48、nation to another network termination. protocol: A formal set of procedures that are adopted to ensure communication between two or more functions within the within the same layer of a hierarchy of functions (source: ITU-T I.112). protocol data unit (PDU): In the reference model for OSI, a unit of d

49、ata specified in an (N)-protocol layer and consisting of (N)-protocol control information and possibly (N)-user data (source: ITU-T X.200 / ISO-IEC 7498-1). push service: service type which delivers information (data/multimedia) initiated from a network (which may be external to the PLMN) to the UE. The service will cause a PDP context to be activated if needed. Q quality of service: The collective effect of service performances which determine the degree of satisfaction of a user of the service (ITU-T E.800). The set of performance parameters tha