ETSI TS 122 083-2018 Digital cellular telecommunications system (Phase 2+) (GSM) Universal Mobile Telecommunications System (UMTS) Call Waiting (CW) and Call Holding (HOLD) Supplem.pdf

1、 ETSI TS 122 083 V15.0.0 (2018-07) Digital cellular telecommunications system (Phase 2+) (GSM); Universal Mobile Telecommunications System (UMTS); Call Waiting (CW) and Call Holding (HOLD); Supplementary Services; Stage 1 (3GPP TS 22.083 version 15.0.0 Release 15) TECHNICAL SPECIFICATION GLOBAL SYST

2、EM FOR MOBILE COMMUNICATIONSRETSI ETSI TS 122 083 V15.0.0 (2018-07)13GPP TS 22.083 version 15.0.0 Release 15Reference RTS/TSGS-0122083vf00 Keywords GSM,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 -

3、NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electro

4、nic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF)

5、version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverab

6、leStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including p

7、hotocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. ETSI 2018. All rights reserved. DECTTM, PLUGT

8、ESTSTM, UMTSTMand the ETSI logo are trademarks of ETSI registered for the benefit of its Members. 3GPPTM and LTETMare trademarks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members. GSMand the GSM logo are

9、 trademarks registered and owned by the GSM Association. ETSI ETSI TS 122 083 V15.0.0 (2018-07)23GPP TS 22.083 version 15.0.0 Release 15Intellectual Property Rights Essential patents IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information per

10、taining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secre

11、tariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates o

12、n the ETSI Web server) which are, or may be, or may become, essential to the present document. Trademarks The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners. ETSI claims no ownership of these except for any which are indicated as being

13、the property of ETSI, and conveys no right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks. Foreword This Technical Specification

14、 (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The

15、 cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as de

16、scribed in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 122 083 V15.0.0 (2018-07)33GPP TS 22.083 version 15.0.0 Release 15Contents Intellectual Prope

17、rty Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 5g30 Scope 6g30.1 References 6g30.2 Abbreviations . 6g31 Call Waiting (CW) . 6g31.1 Definition . 6g31.2 Description . 6g31.2.1 Description 6g31.2.2 Applicability to telecommunication services 7g31.2.3 Terminology . 7g31.3 Normal proce

18、dures with successful outcome . 7g31.3.1 Provision . 7g31.3.2 Withdrawal . 7g31.3.5 Activation . 7g31.3.6 Deactivation 7g31.3.7 Invocation . 7g31.3.8 Normal operation with successful outcome 8g31.3.8.1 Incoming call from C 8g31.3.8.2 Terminating call by A or B . 8g31.3.11 Interrogation . 8g31.4 Exce

19、ptional procedures or unsuccessful outcome 8g31.4.1 Incoming call from subscriber C ignored by subscriber B 8g31.4.2 Incoming call from subscriber C is indicated as UDUB by subscriber B (or terminal B) 8g31.4.3 Release by subscriber C within the specified period 8g31.4.4 Incoming call from subscribe

20、r C is rejected by subscriber B . 8g31.5 Alternate procedures . 8g31.6 Interactions with other Supplementary Services 9g31.6.82.1 Call forwarding unconditional 9g31.6.82.2 Call forwarding on mobile subscriber busy 9g31.6.82.3 Call forwarding on no reply 9g31.6.83.2 Call hold 9g31.6.81.1 Calling line

21、 identification presentation . 9g31.6.84.2 MultiParty . 9g31.6.88.6 Barring of all incoming calls . 9g31.6.88.7 Barring of incoming calls when roaming outside the home PLMN country . 9g31.7 Interactions with other services 9g31.7.1 Multicall 9g31.8 Interworking considerations . 9g32 Call hold . 10g3

22、2.1 Definition . 10g32.2 Description . 10g32.2.1 Description 10g32.2.2 Applicability to telecommunication services 10g32.3 Normal procedures with successful outcome . 10g32.3.1 Provision . 10g32.3.2 Withdrawal . 11g32.3.5 Activation . 11g32.3.6 Deactivation 11g32.3.7 Invocation . 11g32.3.8 Normal op

23、eration with successful outcome 11g32.4 Exceptional procedures or unsuccessful outcome 12g32.4.1 Exceptional operation or unsuccessful outcome . 12g3ETSI ETSI TS 122 083 V15.0.0 (2018-07)43GPP TS 22.083 version 15.0.0 Release 152.4.6 Invocation . 12g32.5 Alternate procedures . 12g32.6 Interactions w

24、ith other Supplementary Services 12g32.6.83.1 Call waiting . 12g32.6.84.2 MultiParty . 12g32.7 Interactions with other services 13g32.7.1 Multicall 13g32.8 Interworking considerations . 13g3Annex A (informative): Change history . 14g3History 15g3ETSI ETSI TS 122 083 V15.0.0 (2018-07)53GPP TS 22.083

25、version 15.0.0 Release 15Foreword This Technical Specification has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the

26、 present document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document unde

27、r change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TS 122 083 V15.0.0 (2018-07)63GPP TS 22.083 version

28、 15.0.0 Release 150 Scope The present document describes the Supplementary Services belonging to the group Call Completion Supplementary Services. The general aspects, including definitions and recommended provision, of the description of Supplementary Services are given in specification TS 22.004 2

29、. The group of Call Completion Supplementary Services is divided into the following two Supplementary Services: - Call waiting (clause 1); - Call hold (clause 2). 0.1 References The following documents contain provisions which, through reference in this text, constitute provisions of the present doc

30、ument. References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (inclu

31、ding a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP TR 21.905: “Vocabulary for 3GPP Specifications“. 2 3GPP TS 22.004: “General on Supplementary Services“. 3 3GPP TS 22.030: “Man-Machine Interface

32、 (MMI) of the Mobile Station (MS)“. 4 3GPP TS 22.081: “Line identification Supplementary Services - Stage 1“. 5 3GPP TS 22.084: “Digital cellular telecommunication system; MultiParty (MPTY) Supplementary Services - Stage 1“. 6 3GPP TS 22.135: “Multicall Stage 1“. 0.2 Abbreviations Abbreviations used

33、 in the present document are listed in TR 21.905 1. 1 Call Waiting (CW) 1.1 Definition The Call Waiting Service permits a mobile subscriber to be notified of an incoming call (as per basic call procedures) whilst the traffic channel is not available for the incoming call and the mobile subscriber is

34、 engaged in an active or held call. Subsequently, the subscriber can either accept, reject, or ignore the incoming call. 1.2 Description 1.2.1 Description This service operates when the traffic channel at the controlling subscriber B is not available and B is engaged in an active or held call. ETSI

35、ETSI TS 122 083 V15.0.0 (2018-07)73GPP TS 22.083 version 15.0.0 Release 15When a third party (calling subscriber C) attempts to connect to that termination, the controlling subscriber B is given an appropriate indication of the waiting call. A notification that the call is waiting will be sent back

36、towards the calling subscriber C. The maximum number of waiting calls at one time per mobile access is one. This means that no further calls are offered to the subscriber while a call is waiting. NOTE: As a network option this maximum number of waiting calls may be greater than one. This is consider

37、ed as a possible future enhancement. 1.2.2 Applicability to telecommunication services The applicability of this Supplementary Service to the ongoing call is defined in TS 22.004 2. The incoming, waiting, call may be of any kind. 1.2.3 Terminology (Controlling) subscriber B This is the subscriber wh

38、o is provided by the network with the Call Waiting Service and who reacts to the Call Waiting. Subscriber C This is the subscriber who has originated a call to B which causes the Call Waiting Service to be invoked. Subscriber A This represents a subscriber who is engaged in a call with B, being eith

39、er the calling or the called party. T2; No answer time out The duration of this time out is the time the network will wait for a response from subscriber B, to the offered call from subscriber C. The value of the timer is between 0.5 and 2 minutes at the service providers discretion. 1.3 Normal proc

40、edures with successful outcome 1.3.1 Provision This Supplementary Service is provisioned for all Basic Services (BS) subscribed to and to which it is applicable, i.e. not provisioned to any subset of these BS. 1.3.2 Withdrawal Withdrawal will be at the request of the subscriber or for administrative

41、 reasons. 1.3.5 Activation This Supplementary Service will be activated either collectively for all applicable Basic Services or on a Basic Service group basis by the subscriber using a control procedure, as specified in TS 22.030 3, or by the service provider. The controlling subscriber shall be in

42、formed by the network of the success or otherwise of her action. 1.3.6 Deactivation The service will be deactivated either collectively for all applicable Basic Services or on a Basic Service group basis by the subscriber using a control procedure, as specified in TS 22.030 3, or by the service prov

43、ider. The controlling subscriber shall be informed by the network of the success or otherwise of her action. 1.3.7 Invocation This service is invoked by the network on arrival of an incoming call if the service is active and the controlling subscriber Bs traffic channel is not available, B is engage

44、d in an active or held call and there is no other call currently waiting. ETSI ETSI TS 122 083 V15.0.0 (2018-07)83GPP TS 22.083 version 15.0.0 Release 151.3.8 Normal operation with successful outcome 1.3.8.1 Incoming call from C When an incoming call from subscriber C arrives, the served mobile subs

45、criber is connected to - at least - one call (active or held) and a NDUB (Network Determined User Busy) condition does not exist, then the CW service shall be invoked and the call shall be offered to subscriber B with an appropriate indication, e.g. with a “Call Waiting Tone“. If a response to the o

46、ffered call is received from the mobile termination at B, then the subscriber C shall be given an indication (e.g. ringing tone) that the called subscriber is being informed of the incoming call and, if possible, that call waiting is in operation. 1.3.8.2 Terminating call by A or B If either subscri

47、ber A or subscriber B requests that the call is terminated, then this call shall be terminated as for basic call (see TS 22.030 3 for more information). Subscriber B shall then be given the normal notification that there is a new call to her, as for a normal terminating call. The network shall conti

48、nue to indicate; e.g. ringing tone towards subscriber C as for a normal call. B can then accept the call from C before the expiry of T2. Subscriber B can also free resources by using the Call Hold Supplementary Service. Subscriber B shall then be able to accept the waiting call from subscriber C bef

49、ore the expiry of T2. Alternatively, subscriber B may specifically request release or hold of the connection to A and accept the waiting call as one action (see TS 22.030 3). In this case, the network connects subscriber B to subscriber C with no further notifications to either subscriber. This must be done before the expiry of T2. 1.3.11 Interrogation Status check The controlling subscriber may interrogate the network by the use of a control procedure, as specified in TS 22.030 3. The network shall respond with an appropriate indication tell