ETSI TS 122 097-2017 Digital cellular telecommunications system (Phase 2+) (GSM) Universal Mobile Telecommunications System (UMTS) LTE Multiple Subscriber Profile (MSP) Phase 2 Ser.pdf

1、 ETSI TS 122 097 V14.0.0 (2017-03) Digital cellular telecommunications system (Phase 2+) (GSM); Universal Mobile Telecommunications System (UMTS); LTE; Multiple Subscriber Profile (MSP) Phase 2; Service description; Stage 1 (3GPP TS 22.097 version 14.0.0 Release 14) TECHNICAL SPECIFICATION ETSI ETSI

2、 TS 122 097 V14.0.0 (2017-03)13GPP TS 22.097 version 14.0.0 Release 14Reference RTS/TSGS-0122097ve00 Keywords GSM,LTE,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucr

3、atif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the p

4、resent document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network

5、 drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors i

6、n the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except a

7、s authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2017. All rights reserved. DECT

8、TM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM A

9、ssociation. ETSI ETSI TS 122 097 V14.0.0 (2017-03)23GPP TS 22.097 version 14.0.0 Release 14Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available fo

10、r ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http

11、s:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essen

12、tial to the present document. Foreword The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS,

13、3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Dr

14、afting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 122 097 V14.0.0 (2017-03)33GPP TS 22.097 version 14.0.0 Release 14Contents Intellectual Property Rights 2g3Foreword . 2g3Modal ve

15、rbs terminology 2g3Foreword . 5g31 Scope 6g32 References 6g33 Definitions and abbreviations . 6g33.1 Definitions 6g33.2 Abbreviations . 7g34 Description . 7g34.1 Applicability to telecommunication services 7g35 Functional requirements . 7g35.1 Handling of the MSP Service . 7g35.1.1 Provision . 7g35.

16、1.2 Withdrawal . 7g35.1.3 Activation . 7g35.1.4 Deactivation 7g35.1.5 Invocation . 8g35.2 Handling of the Profile . 8g35.2.1 Provision . 8g35.2.2 Withdrawal . 8g35.2.3 Registration . 8g35.2.4 Selection . 8g35.2.5 Erasure 8g35.2.6 Interrogation . 8g35.3 Normal operation with successful outcome 9g35.3

17、.1 Mobile Originating Calls 9g35.3.2 Mobile Terminating Calls. 9g35.3.3 Mobile Originating Call Independent Supplementary Service Activities . 9g35.3.4 Call Related Supplementary Service Activities 9g35.4 Exceptional procedures or unsuccessful outcome 9g35.4.1 Roaming into networks not supporting MS

18、P 9g35.4.2 Registration or Selection of a profile that is already registered 9g35.4.3 Registration or Selection of a non-provisioned profile . 9g35.4.4 Registration or Selection attempts where MSP is not provisioned . 10g36 Interaction with supplementary services 10g36.1 Line Identification Services

19、 10g36.2 Call Hold (HOLD) 10g36.3 Call Waiting (CW) . 10g36.4 Call Forwarding 10g36.5 Multi Party Service (MPTY) 10g36.6 Closed User Group (CUG) . 10g36.7 Advice of Charge (AoC) 10g36.8 Call Barring 11g36.9 Explicit Call Transfer (ECT) 11g36.10 CCBS 11g36.11 eMLPP 11g36.12 Multicall . 11g37 Interact

20、ion with other services . 11g37.1 The Multi-Numbering Scheme . 11g37.2 The Short Message Service 11g37.3 Interactions with CAMEL 12g3ETSI ETSI TS 122 097 V14.0.0 (2017-03)43GPP TS 22.097 version 14.0.0 Release 147.4 Interactions with OR 12g37.5 Operator Determined Barring . 12g37.6 Roaming restricti

21、ons. 12g38 Cross-Phase Compatibility . 12g3Annex A (informative): Change history . 13g3History 14g3ETSI ETSI TS 122 097 V14.0.0 (2017-03)53GPP TS 22.097 version 14.0.0 Release 14Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The conten

22、ts of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows

23、: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z

24、the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TS 122 097 V14.0.0 (2017-03)63GPP TS 22.097 version 14.0.0 Release 141 Scope The present document gives an overall view of how this service shall operate both in the PLMN and within the Mobil

25、e Station (MS). This TS defines functionality and is not intended to constrain implementation. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publicati

26、on, edition number, version number, etc.) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to th

27、e latest version of that document in the same Release as the present document. 1 3GPP TR 22.905: “Vocabulary for 3GPP Specifications“. 2 3GPP TS 22.004: “General on supplementary services“. 3 3GPP TS 22.030: “ Man-machine Interface (MMI) of the mobile station (MS)“. 4 3GPP TS 23.040: “Technical real

28、ization of the Short Message Service (SMS) Point to Point (PP)“. 5 3GPP TS 22.135: “Multicall“. 6 3GPP TS 22.001: “Principles of circuit telecommunication services supported by a Public Land Mobile Network (PLMN) “. 3 Definitions and abbreviations 3.1 Definitions For the purposes of this TS the foll

29、owing definitions apply: Subscriber: The user who is provisioned with the MSP service Profile: A profile consists of a set of telecommunications services for the subscriber. In the case of the single numbering scheme there is a unique MSISDN associated with each profile. In the multi-numbering schem

30、e there is the ability to have a unique MSISDN associated with each basic service in each profile. Service Provider (SP): The organisation through which the subscriber obtains PLMN telecommunication services. This may be the network operator or possibly a separate body. Profile Identification (Profi

31、le ID): The profile IDs allow unambiguous identification of each profile. This will allow the subscriber to select the preferred profile for outgoing calls and for subscriber actions. For terminating calls the profile ID shall be part of the notification of the profile. Registered Profile: The regis

32、tered profile is that registered by/for the subscriber Selected Profile: For mobile originated calls and short messages this is the registered profile unless the subscriber explicitly selects an alternative profile. For mobile terminating activities, this is the profile associated with the MSISDN ad

33、dressed. Mobile Terminating Activities: These include mobile terminating calls, short messages (SMS MT) and Call Independent Supplementary Services (e.g. NI-USSD). ETSI ETSI TS 122 097 V14.0.0 (2017-03)73GPP TS 22.097 version 14.0.0 Release 14Default Profile: Profile to be used when roaming to non-s

34、upporting network 3.2 Abbreviations For the purposes of this TS the following abbreviations apply, in addition, abbreviations used in this TS are listed in 3GPP TS 21.905 1. MSP Multiple Subscriber Profile 4 Description Multiple Subscriber Profile is an optional service to enable mobile subscribers

35、to have several profiles associated with a single IMSI, with each profile being a subscription option. Each profile may be used for mobile originated and mobile terminated calls. Up to four different profiles can be provisioned against a subscriber using the MSP feature. This will allow the subscrib

36、er to separate her telecommunication service needs into different identities (e.g. business and home). The charges accrued for services shall be associated with the appropriate profile, allowing separate charging for each profile. A supporting visited network shall indicate on the billing record for

37、 charging purposes the profile used. 4.1 Applicability to telecommunication services The applicability of this supplementary service is defined in 3GPP TS 22.004 2. 5 Functional requirements 5.1 Handling of the MSP Service This clause describes the normal procedures for the handling of the MSP servi

38、ce. 5.1.1 Provision The MSP service shall be provided after prior arrangement with the service provider. If the MSP service is provisioned for the subscriber at the first time the subscriber shall also be provisioned with at least two profiles. 5.1.2 Withdrawal Withdrawal of the MSP service shall be

39、 done by either the service provider at the subscribers request or for administrative reasons. The MSP service shall be withdrawn when there is only one profile remaining. 5.1.3 Activation The MSP service is activated by the service provider as a result of provision. 5.1.4 Deactivation The MSP servi

40、ce is deactivated by the service provider as a result of withdrawal. ETSI ETSI TS 122 097 V14.0.0 (2017-03)83GPP TS 22.097 version 14.0.0 Release 145.1.5 Invocation The MSP service is invoked by mobile originated and mobile terminating calls. 5.2 Handling of the Profile This subclause describes the

41、normal procedures for selecting the registered profile for mobile originated calls, short messages and call independent supplementary service related activities. For mobile terminating activities the profile is selected automatically by association with the MSISDN addressed. 5.2.1 Provision The prov

42、ision of profiles (up to a maximum of four) is provided by prior arrangement with the service provider. The subscriber may select any provisioned profile on a per call basis or register one of them. The subscriber will nominate one of their provisioned profiles as the default profile to be used when

43、 roaming to non-supporting networks. The subscriber may subsequently nominate an alternative default (i.e. roaming) profile, nevertheless the default profile can only be changed by the service provider. 5.2.2 Withdrawal The Service Provider shall be able to withdraw profiles. The registered profile

44、shall never be withdrawn, and consequently if the registered profile needs to be withdrawn the service provider shall first register the subscriber onto another profile. 5.2.3 Registration Registration is the procedure by which information is written to the network to allocate a particular profile t

45、o be used for all outgoing calls and supplementary service related activities. Registration to a profile shall take place either by the service provider or with an appropriate control procedure by the subscriber as defined in 3GPP TS 22.030 3. At all times only one profile shall be registered. The n

46、etwork shall indicate to the user whether an attempt to register a profile has been successful or not. 5.2.4 Selection The profile to be used for mobile originated calls is selected either implicitly or explicitly: - Implicit selection occurs if the served subscriber does not indicate a profile ID w

47、hen initiating a call or short message. In this case the selected profile is the registered profile. - Explicit selection occurs if the served subscriber does indicate a profile ID when initiating a call or short message. The control procedure used to select the profile is as defined in 3GPP TS 22.0

48、30 3. For mobile terminating activities, the profile is selected according to the MSISDN addressed. 5.2.5 Erasure A previous registration can be erased in the following ways: - the subscriber can register to another profile which causes the previous registration to be overridden; - the registered pr

49、ofile is erased as a result of withdrawal of the MSP service. 5.2.6 Interrogation The subscriber shall be able to interrogate which profile is the registered profile and all other available profile IDs, with an appropriate control procedure as defined in 3GPP TS 22.030 3. ETSI ETSI TS 122 097 V14.0.0 (2017-03)93GPP TS 22.097 version 14.0.0 Release 145.3 Normal operation with successful outcome 5.3.1 Mobile Originating Calls Mobile originating calls shall be handled according to the selected profile. This shall be the registered profile unless an