ETSI TS 122 105-2016 Digital cellular telecommunications system (Phase 2+) Universal Mobile Telecommunications System (UMTS) LTE Services and service capabilities (V13 0 0 3GPP TS .pdf

1、 ETSI TS 1Digital cellular telecoUniversal Mobile TelServices (3GPP TS 22.1TECHNICAL SPECIFICATION122 105 V13.0.0 (2016communications system (Phaelecommunications System (LTE; s and service capabilities .105 version 13.0.0 Release 1316-01) hase 2+); (UMTS); 13) ETSI ETSI TS 122 105 V13.0.0 (2016-01)

2、13GPP TS 22.105 version 13.0.0 Release 13Reference RTS/TSGS-0122105vd00 Keywords GSM,LTE,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfec

3、ture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be

4、modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretaria

5、t. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send you

6、r comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of E

7、TSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2016. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI log

8、o are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 122 105 V13.0.

9、0 (2016-01)23GPP TS 22.105 version 13.0.0 Release 13Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can

10、 be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI

11、 IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword

12、This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the correspo

13、nding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“

14、 are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 122 105 V13.0.0 (2016-01)33GPP TS 22.105 version 13.0.0 Release 1

15、3Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 5g31 Scope 6g32 References 6g32.1 Normative references . 6g32.2 Informative references 7g33 Definitions and abbreviations . 7g33.1 Definitions 7g33.2 Abbreviations . 8g34 Framework for the description of te

16、lecommunication services and applications. 8g34.1 General . 8g34.2 Basic telecommunication services 9g34.2.1 Bearer services 9g34.2.2 Teleservices 10g34.3 Supplementary services 10g34.4 Service Capabilities 10g35 Bearer Services . 11g35.1 Definition of bearer services 11g35.2 Description of bearer s

17、ervices 11g35.2.1 Information transfer 11g35.2.2 Information Quality 12g35.3 Supported bit rates 13g35.4 Range of QoS requirements 14g35.5 Supported End User QoS . 14g35.6 Radio Interface optimisation 16g35.7 Service Based QoS Control of IP based Services . 17g35.8 QoS control for IP bearer service

18、. 17g35.9 Ability to effectively handle a variety of different types of IP traffic 17g35.10 IP address support 18g36 Teleservices 18g36.1 Definition of teleservices 18g36.2 Description of teleservices . 18g36.3 Support of teleservices . 19g36.4 Existing Teleservices supported by PLMN 20g36.4.1 Speec

19、h . 20g36.4.2 Emergency Call 20g36.4.3 Short Message Service - Point to Point (SMS-PP) 20g36.4.4 Short Message Service - Cell Broadcast (SMS-CB) . 21g36.5 Internet Access . 21g37 Supplementary Services . 21g38 Service Capability features . 21g38.1 Framework service capability features . 22g38.2 Non-

20、Framework service capability features . 22g39 Standardised Protocols and Capabilities 23g39.1 Access protocols . 24g39.2 Execution Environment 24g310 Access dependent services and features . 25g3ETSI ETSI TS 122 105 V13.0.0 (2016-01)43GPP TS 22.105 version 13.0.0 Release 1311 Certificates . 26g3Anne

21、x A (informative): Examples of services built from service capabilities features 27g3Annex B (informative): Description and analysis of communication schemes . 28g3B.1 Communication schemes 28g3B.2 QoS related performance requirements for example end user applications . 28g3B.2.1 Performance require

22、ments for conversational real-time . 28g3B.2.2 Performance requirements for Interactive Services 30g3B.2.3 Performance requirements for streaming services 31g3B.2.4 Performance requirements for Background applications 32g3B.3 Adaptability and bearer service negotiation . 32g3Annex C (informative) :

23、Change history . 33g3History 35g3ETSI ETSI TS 122 105 V13.0.0 (2016-01)53GPP TS 22.105 version 13.0.0 Release 13Foreword This Technical Specification has been produced by the 3GPP. The contents of the present document are subject to continuing work within the TSG and may change following formal TSG

24、approval. Should the TSG modify the contents of this TS, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greate

25、r indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the specification. ETSI ETSI TS 122 1

26、05 V13.0.0 (2016-01)63GPP TS 22.105 version 13.0.0 Release 131 Scope Existing systems have largely standardised the complete sets of bearer services, teleservices and supplementary services which they provide. 3GPP specifications specify service capabilities rather than services, allowing service di

27、fferentiation and system continuity. This Technical Specification (TS) describes how and what kind of services the user has access to. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are either s

28、pecific (identified by date of publication, edition number, version number, etc.) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-sp

29、ecific reference implicitly refers to the latest version of that document in the same Release as the present document. 2.1 Normative references 1 3GPP TS 22.001: “Principles of circuit telecommunication services supported by a Public Land Mobile Network (PLMN)“. 2 3GPP TS 02.002: “Circuit Bearer ser

30、vices supported by a Public Land Mobile Network (PLMN)“. 3 3GPP TS 22.003: “Circuit Teleservices supported by a Public Land Mobile Network (PLMN)“. 4 3GPP TS 22.004: “General on supplementary services“. 5 3GPP TS 22.038: “ SIM toolkit Stage 1“. 6 3GPP TS 22.057: “Mobile Execution Environment (MExE);

31、 Service description; Stage 1“. 7 3GPP TS 22.060: “General Packet Radio Service (GPRS) stage 1“. 8 3GPP TS 22.078: “Customised Applications for Mobile network Enhanced Logic (CAMEL); Service definition - Stage 1“. 9 3GPP TS 22.101: “Service principles“. 10 Void 11 3GPP TS 22.135: “Multicall, stage 1

32、“. 13 3GPP TS 33.102: “3G Security, Security Architecture“. 14 3GPP TS 23.107: “QoS Concept and Architecture; Stage 2“. 15 Open Mobile Alliance (OMA): OMA-RD-Parlay_Service_Access-V1_0-20100427-A 16 3GPP TS 22.340: “IP Multimedia System (IMS) messaging; Stage 1“. ETSI ETSI TS 122 105 V13.0.0 (2016-0

33、1)73GPP TS 22.105 version 13.0.0 Release 132.2 Informative references 12 ITU-T Recommendation F.700 (11/2000): “Framework Recommendation for multimedia services“. 17 ITU-T Recommendation E.105 (08/1992): “International telephone service“ 18 ITU-T Recommendation E.800 (09/2008): “Definitions of terms

34、 related to quality of service“ 19 ITU-T Recommendation G.114 (05/2003): “One-way transmission time“ 3 Definitions and abbreviations 3.1 Definitions For the purposes of this TS, the following definitions apply: Basic telecommunication service : this term is used as a common reference to both bearer

35、services and teleservices. Bearer service : is a type of telecommunication service that provides the capability of transmission of signals between access points. Call : a logical association between several users (this could be connection oriented or connection less). Connection : is a communication

36、 channel between two or more end-points (e.g. terminal, server etc.). Mobile termination : the mobile termination is the component of the user equipment which supports functions specific to management of the radio interface (Um). Multimedia service : Multimedia services are services that handle seve

37、ral types of media. For some services, synchronisation between the media is necessary (e.g. synchronised audio and video). A multimedia service may involve multiple parties, multiple connections, and the addition or deletion of resources and users within a single call. Nomadic Operating Mode : Mode

38、of operation where the terminal is transportable but being operated while stationary and may in addition require user co-operation (e.g. close to open spaces, antenna setup.). Quality of Service : the collective effect of service performances which determine the degree of satisfaction of a user of a

39、 service. It is characterised by the combined aspects of performance factors applicable to all services, such as; service operability performance; - service accessibility performance; - service retention performance; - service integrity performance; and - other factors specific to each service. Serv

40、ice Capabilities: Bearers defined by parameters, and/or mechanisms needed to realise services. These are within networks and under network control. Service Capability Feature: Functionality offered by service capabilities that are accessible via the standardised application interface Services: Servi

41、ces are made up of different service capability features. Supplementary service : is a service which modifies or supplements a basic telecommunication service. Consequently, it cannot be offered to a user as a standalone service. It shall be offered together with or in association with a basic telec

42、ommunication service. The same supplementary service may be common to a number of basic telecommunication services. ETSI ETSI TS 122 105 V13.0.0 (2016-01)83GPP TS 22.105 version 13.0.0 Release 13Teleservice; is a type of telecommunication service that provides the complete capability, including term

43、inal equipment functions, for communication between users according to standardised protocols and transmission capabilities established by agreement between operators. 3.2 Abbreviations For the purposes of this TS, the following abbreviations apply; BER Bit Error Rate CAMEL Customised Application fo

44、r Mobile network Enhanced Logic DTMF Dual Tone Multiple Frequency TR Technical Report TS Technical Specification ETSI European Telecommunications Standards Institute FAX Facsimile FER Frame Erasure Rate GSM Global System for Mobile Communications GERAN GSM / EDGE Radio Access Network. HE Home Enviro

45、nmentHSDPA High Speed Downlink Packet Access IN Intelligent Network ISDN Integrated Services Digital Network ITU International Telecommunication Union LCS Location Services MExE Mobile Execution Environment MMI Man Machine Interface MO Mobile OriginationMT Mobile Termination PC Personal ComputerPIN

46、Personal Identity Number PNP Private Numbering Plan POTS Plain Old Telephony Service QoS Quality of Service USIM User Service Identity Module SMS Short Message Service SAT SIM Application Toolkit SN Serving Network SoLSA Support of Localised Service Area UE User Equipment 4 Framework for the descrip

47、tion of telecommunication services and applications 4.1 General Telecommunication services defined by 3GPP specifications are the communication capabilities made available to users by home environment and serving network. A PLMN provides, in co-operation with other networks, a set of network capabil

48、ities which are defined by standardised protocols and functions and enable telecommunication services to be offered to users. A service provision by a HE/SN to a user may cover the whole or only part of the means required to fully support the service. The service classification and description which

49、 follow are independent of different possible arrangements for the ownership and provision to the user of the means required to support a service. ETSI ETSI TS 122 105 V13.0.0 (2016-01)93GPP TS 22.105 version 13.0.0 Release 134.2 Basic telecommunication services Basic telecommunication services are divided in two broad categories; - bearer services, which are telecommunication services providing the capability of transmission of signals between access points; - teleservices, which are telecommunication services providing the complet