ETSI TS 122 183-2017 Digital cellular telecommunications system (Phase 2+) (GSM) Universal Mobile Telecommunications System (UMTS) Customized Ringing Signal (CRS) requirements Stag.pdf

1、 ETSI TS 122 183 V14.0.0 (2017-03) Digital cellular telecommunications system (Phase 2+) (GSM); Universal Mobile Telecommunications System (UMTS); Customized Ringing Signal (CRS) requirements; Stage 1 (3GPP TS 22.183 version 14.0.0 Release 14) TECHNICAL SPECIFICATION GLOBAL SYSTEM FOR MOBILE COMMUNI

2、CATIONSRETSI ETSI TS 122 183 V14.0.0 (2017-03)13GPP TS 22.183 version 14.0.0 Release 14Reference RTS/TSGS-0122183ve00 Keywords GSM,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association

3、 but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print vers

4、ions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a spe

5、cific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you

6、find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and micro

7、film except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2017. All rights r

8、eserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned

9、 by the GSM Association. ETSI ETSI TS 122 183 V14.0.0 (2017-03)23GPP TS 22.183 version 14.0.0 Release 14Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly

10、 available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web

11、 server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may

12、become, essential to the present document. Foreword The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference betwee

13、n GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 o

14、f the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 122 183 V14.0.0 (2017-03)33GPP TS 22.183 version 14.0.0 Release 14Contents Intellectual Property Rights 2g3Foreword

15、 2g3Modal verbs terminology 2g3Foreword . 4g31 Scope 5g32 References 5g33 Definitions, symbols and abbreviations . 5g33.1 Definitions 5g33.2 Abbreviations . 6g34 CRS Service Requirements 6g34.1 Basic functionality of CRS service . 6g34.1.1 Functionality - IMS domain 7g34.1.2 Functionality - CS doma

16、in 7g34.2 Normal procedures with successful outcome . 8g34.2.1 Provisioning and Withdrawal . 8g34.2.2 Activation and Deactivation and Update 8g34.2.2.1 Activation 8g34.2.2.2 Deactivation 8g34.2.2.3 Update . 8g34.2.3 Basic scenarios 8g34.2.3.1 Only calling party has activated the CRS service . 8g34.2

17、3.2 Only called party has activated the CRS service . 8g34.2.3.3 Both parties have activated the CRS service . 9g34.2.4 Interaction with Supplementary Services . 9g34.2.4.2 Originating Identification Restriction (OIR) . 9g34.2.4.3 Communication Diversion (CDIV) . 9g34.2.4.4 Communication Waiting (C

18、W) 10g34.2.4.5 Explicit Communication Transfer (ECT) 11g34.3 CRS service configuration 12g34.4 The content of CRS 12g34.5 Inter-working CRS . 12g34.5.1 Inter-working between PLMNs 12g34.5.2 Inter-working between CS and IMS . 13g3Annex A (informative): Change history . 14g3History 15g3ETSI ETSI TS 12

19、2 183 V14.0.0 (2017-03)43GPP TS 22.183 version 14.0.0 Release 14Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG appro

20、val. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 o

21、r greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TS 12

22、2 183 V14.0.0 (2017-03)53GPP TS 22.183 version 14.0.0 Release 141 Scope The document specifies the requirements and technical considerations for Customized Ringing Signal (CRS) service in the PS and CS domains, especially additional features for roaming and interoperability support. This document co

23、nsiders voice and multi-media CRS, so the CRS user may experience favourable songs, multi-media clips or other customized CRS. This document specifies the CRS filtering service requirements that allow the user to filter the CRS. 2 References The following documents contain provisions which, through

24、reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest versi

25、on applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP TR 21.905: “Vocabulary for 3GPP Specifications“. 2 3GPP TS 22.173: “IP Multimedi

26、a Core Network Subsystem (IMS) Multimedia Telephony Service and supplementary services; Stage 1“. 3 3GPP TS 22.240: “Service requirements for 3GPP Generic User Profile (GUP); Stage 1“. 4 ETSI TISPAN TR 181 015: “Requirements for Customized Originating and Terminating Multimedia Information Presentat

27、ion (COMIP/CTMIP) and Customized Originating and Terminating Multimedia Information Filtering (COMIF/CTMIF) Requirements Analysis“. 3 Definitions, symbols and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in TR 21.905 1 and the following appl

28、y. A term defined in the present document takes precedence over the definition of the same term, if any, in TR 21.905 1. Ringing Signal: A Ringing Signal is played to the called party as an incoming communication indication during establishment of a communication. It is provided by the UE of the cal

29、led party. Customized Ringing Signal: A Ringing Signal that is customized by the calling party or the called party, and it can contain additional media types. It is provided by the network. CRS inter-action: CRS inter-action is the interaction of the CRS service with other services, e.g. inter-actio

30、n with Call Forwarding. CRS inter-working : CRS inter-working is the interworking of a CRS service over different domains or subsystems (CS or IMS) as well as between PLMNs. CRS content provider: A service provider that provides a set of Ring Signals for use as CRS for subscribes of the CRS service.

31、 A 3GPP operator may be a CRS content provider. ETSI ETSI TS 122 183 V14.0.0 (2017-03)63GPP TS 22.183 version 14.0.0 Release 143.2 Abbreviations For the purposes of the present document, the abbreviations given in TR 21.905 1 and the following apply. An abbreviation defined in the present document t

32、akes precedence over the definition of the same abbreviation, if any, in TR 21.905 1. CRS Customized Ringing Signal 4 CRS Service Requirements 4.1 Basic functionality of CRS service The Customized Ringing Signal service (CRS service) is an operator specific service by which an operator enables the s

33、ubscriber to customize the ringing signal which is played to the called party. The CRS content will be provided to the called party only its allowed by the called party. The called party does not need to be a CRS subscriber to experience the CRS set by calling subscriber. - The service shall support

34、 the CRS content types of audio, video, image, graphic, text, location, and electronic business card. - CRS can contain one or several content types, and at most one element of each type. - The called party should be able to simultaneously experience multiple CRS contents, e.g. audio and video. - Th

35、e service user shall be able to subscribe to the services, activate the services, update the settings, e.g. to change his active CRS. - The CRS service shall override the default ringing signal towards the called party provided that media components are compatible. - The called party shall be able t

36、o experience the CRS set by the called service subscriber. - The called party shall be able to experience the CRS set by the calling service subscriber. - The operator should have the capability to store multiple CRSs per service subscriber. - It should be possible to inform the user about status an

37、d changes in his service, e.g. service expiry date or a particular CRS content. Note: In the CS domain, this information may be provided by existing means such as SMS and web access. - The operator shall be able to charge for the CRS service and the related contents on event, volume or media type ba

38、sis. - It shall be possible for a subscriber to subscribe to CRS that is provided by a third party content provider. - CRS service should not negatively affect the conversation between calling and called parties, e.g. no voice /video clipping. - If the CRS cant be played for some reason (for example

39、 the CRS system fails, or the CRS content expiry is up, or the called user roams from 3G network to 2G network, or other reasons), the called party shall experience the default ringing signal instead of the CRS. - When the multi-media CRS fails to be played in some condition (such as the caller roa

40、ms from 3G network to 2G network or network congestion occurs), the voice CRS may be played instead if possible. - The operator shall be able to verify that the party is authorised to store and update CRS content. - The operator shall allow the calling party to select from the pre-stored CRS content

41、 according to the called party on a per call basis. ETSI ETSI TS 122 183 V14.0.0 (2017-03)73GPP TS 22.183 version 14.0.0 Release 14- As service option, if a specific text (object of the communication) is provided by the calling party, this information should replace any potential text information pr

42、e-stored in the network. 4.1.1 Functionality - IMS domain The CRS services in IMS domain are defined by: - For the CRS service, the called partys operator shall be able to configure which CRS should have priority, the one set by the called or calling CRS service subscriber. The called partys operato

43、r shall be able to take into account the called CRS service subscribers preferences. By default, if no preference is set, the CRS set by the called party has priority. - When the called party answers the communication the CRS shall stop or continue to play during the conversation, depending on opera

44、tor or user preferences. By default, if no preference is set, when the called party answers the communication the CRS shall stop. - When the calling party is setting up a communication, the calling party shall be able to send an indication to the CRS service which CRS to play to the called party. -

45、The called party shall have the capability to copy the CRS of the calling party as his own CRS while the CRS is being played.The pre-requisites are that the calling party has enabled CRS sharing, if applicable, for that instance of CRS and that both parties are subscribers to the same HPLMN. Note 1:

46、 A CRS might also be copied offline via e.g. web interface but that functionality does not require standardisation. Note 2: The expression “to copy the CRS“ does not necessarily mean that the CRS is actually copied. It may also mean that a purchase request is being sent to the CRS service provider.

47、 The CRS service shall be able to send CRS to the called party on per call basis. - The CRS service shall send an indication to the multimedia information presentation service which multimedia information to play to the called party (e.g. when the called party is notified about an incoming communic

48、ation, the CRS subscriber can send an indication to the CRS service which CRS to play to the called party). - The CRS subscriber may be able to replace one CRS with another one while it is playing. - The CRS subscriber may be able to receive CRS service after communication establishment. 4.1.2 Funct

49、ionality - CS domain The CRS services in CS domain are defined by: - For the CRS service, the called partys operator shall be able to configure which CRS should have priority, the one set by the called or calling CRS service subscriber. By default, if no preference is set, the CRS set by the called party has priority. - When the called party answers the communication the CRS shall stop. - The called party shall have the capability to copy the CRS of the calling party as his own CRS. The pre-requisites are that the calling user has enabled CRS shari