ETSI TS 122 220-2017 Universal Mobile Telecommunications System (UMTS) Service requirements for Home Node B (HNB) and Home eNode B (HeNB) (V14 0 0 3GPP TS 22 220 version 14 0 0 Rel.pdf

1、 ETSI TS 122 220 V14.0.0 (2017-03) Universal Mobile Telecommunications System (UMTS); Service requirements for Home Node B (HNB) and Home eNode B (HeNB) (3GPP TS 22.220 version 14.0.0 Release 14) TECHNICAL SPECIFICATION ETSI ETSI TS 122 220 V14.0.0 (2017-03)13GPP TS 22.220 version 14.0.0 Release 14R

2、eference RTS/TSGS-0122220ve00 Keywords UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The

3、 present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization o

4、f ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware t

5、hat the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following servic

6、es: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shal

7、l not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2017. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for

8、 the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 122 220 V14.0.0 (2017-03)23GPP TS 22.220 version 14.0.

9、0 Release 14Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellect

10、ual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including

11、 IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword The present document may refer to techni

12、cal specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform

13、.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must

14、not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 122 220 V14.0.0 (2017-03)33GPP TS 22.220 version 14.0.0 Release 14Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 5g3Introduction 5g31 Scope 6g32 References 6g33 D

15、efinitions, symbols and abbreviations . 6g33.1 Definitions 6g33.2 Abbreviations . 7g34 General . 7g34.1 Description . 7g35 Common requirements for Home NodeB / Home eNodeB 7g35.1 HNB and HeNB Installation, identification and location requirements . 7g35.2 OA 2 presented to TSG for approval; 3 or gre

16、ater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. Introduction In Rel-

17、8, 3GPP has specified the basic functionalities for the support of Home Node B (HNB) and Home eNodeB (HeNB). The requirements for these basic functionalities were captured in TS 22.011. From Rel-9 onward, it has been agreed to consolidate all the requirements from Rel-8 and further requirements for

18、HNB and HeNB in a new TS, which is this specification. ETSI ETSI TS 122 220 V14.0.0 (2017-03)63GPP TS 22.220 version 14.0.0 Release 141 Scope This specification defines the service requirements for the basic functionalities for the support of Home NodeB (HNB) and Home eNodeB (HeNB) jointly referred

19、to as H(e)NB and the further functionalities that will enable the mobile operators to provide more advanced services as well as improving the user experience. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document.

20、 References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a

21、 GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP TR 21.905: “Vocabulary for 3GPP Specifications“. 2 Void 3 3GPP TS 22.246: “Multimedia Broadcast/Multicast Service (MBMS) user services; Stage 1“. 4 3G

22、PP TS 22.101: “Service Aspects; Service Principles“. 5 TR-069 Amendment 2: “CPE WAN Management Protocol v1.1, Broadband Forum”, viewable at http:/www.broadband-forum.org/technical/download/TR-069Amendment2.pdf 6 3GPP TS 25.304: “User Equipment (UE) procedures in idle mode and procedures for cell res

23、election in connected mode”. 7 3GPP TS 36.304: “Evolved Universal Terrestrial Radio Access (E-UTRA); User Equipment (UE) procedures in idle mode“. 8 3GPP TS 22.115: “Service aspects; Charging and billing“. 9 3GPP TS 22.268: “Public Warning System (PWS) requirements“. 10 3GPP TS 22.011: “Service acce

24、ssibility“. 11 3GPP TS 31.115: “Secured packet structure for (Universal) Subscriber Identity Mobule (U)SIM Toolkit applications“. 12 3GPP TS 31.116: “Remote APDU Structure for (U)SIM Toolkit applications“. 3 Definitions, symbols and abbreviations 3.1 Definitions For the purposes of the present docum

25、ent, the terms and definitions given in TR 21.905 1 and the following apply. A term defined in the present document takes precedence over the definition of the same term, if any, in TR 21.905 1. Closed access mode: H(e)NB provides services only to its associated CSG members. Home based network: An I

26、P based network in the same premises as, and is connected to, the H(e)NB. Hybrid access mode: H(e)NB provides services to its associated CSG members and to non-CSG members. ETSI ETSI TS 122 220 V14.0.0 (2017-03)73GPP TS 22.220 version 14.0.0 Release 14Open access mode: H(e)NB operates as a normal No

27、deB or eNodeB. HNB: A HNB is a Customer-premises equipment that connects a 3GPP UE over UTRAN wireless air interface to a mobile operators network using a broadband IP backhaul. HeNB: A HeNB is a Customer-premises equipment that connects a 3GPP UE over EUTRAN wireless air interface to a mobile opera

28、tors network using a broadband IP backhaul. H(e)NB Gateway: H(e)NB Gateway is a mobile operators equipment (usually physically located on mobile operator premises) through which the H(e)NB gets access to mobile operators core network. H(e)NB Hosting Party: A H(e)NB Hosting Party has a contractual re

29、lationship with the operator, related to the provision of access to the operators network via one or more H(e)NBs. NOTE: A H(e)NB Hosting Party is likely to have the billing relationship with the operator. A H(e)NB Hosting Party will typically be the “lead” user in a household, but could be e.g. the

30、 corporate IT manager in an enterprise context. H(e)NB Subsystem: A H(e)NB Subsystem consists of the H(e)NB and the H(e)NB Gateway. 3.2 Abbreviations For the purposes of the present document, the abbreviations given in TR 21.905 1 and the following apply. An abbreviation defined in the present docum

31、ent takes precedence over the definition of the same abbreviation, if any, in TR 21.905 1. CSG Closed Subscriber Group HNB Home NodeB HeNB Home eNodeB H(e)NB HNB and HeNB 4 General 4.1 Description Access to 3G and evolved 3G (EPS) services may be provided via UTRAN or E-UTRAN cellular base stations

32、belonging to e.g. domestic, business, commercial enterprises. This type of access may be provided by the PLMN by means of HNB and HeNB (jointly referred to as H(e)NB). The H(e)NB provides services either only to a Closed Subscriber Group (CSG) or to other mobile subscribers too. The H(e)NB is connec

33、ted to the mobile operator core network using IP via any suitable access technology. 5 Common requirements for Home NodeB / Home eNodeB 5.1 HNB and HeNB Installation, identification and location requirements - H(e)NB shall have a unique equipment identity. - All the H(e)NBs serving the same CSG shar

34、e the same unique (within the PLMN) identity called CSG Identity. NOTE: CSGs of different PLMNs are considered different, even if the PLMNs are indicated to the UE as “equivalent PLMNs“ 10. ETSI ETSI TS 122 220 V14.0.0 (2017-03)83GPP TS 22.220 version 14.0.0 Release 14- It shall be possible to suppo

35、rt at least 125 million CSG Identities within a PLMN of an operator. - The radio transmitter of a H(e)NB shall not be activated until configured and authorised by the operator. - When installing, provisioning, configuring or re-configuring an H(e)NB the operator shall be able to: - verify the H(e)NB

36、s identity. - obtain the geographical location of the H(e)NB. NOTE: The scenario where a H(e)NB is connected to one operators network and later changed to another operators network is not required. - The operator shall be able to determine that the H(e)NB is installed and operated in accordance with

37、 all relevant regulatory requirements. - The operator shall be able to configure the settings of the H(e)NB. In the case where the H(e)NB has detrimental impact on the spectrum usage, the H(e)NB can be set to out-of-service by the operator. - Installation and activation of a new H(e)NB shall require

38、 no reconfiguration of the operators network. - The impact of H(e)NB on the core network should be minimised. 5.2 OA this allows a maximum length of 48 characters coded on one byte, 24 characters on two bytes, 16 characters on 3 bytes down to a minimum of 12 characters if all characters are encoded

39、on 4 bytes. - If available and depending on operator preferences a HNB Name may be stored together with the associated CSG Identity in the UEs Operator CSG List. - If available and depending on operator preferences a HNB Name may be stored together with the associated CSG Identity in the UEs Allowed

40、 CSG List. - A HNB Name present in the Operator CSG list shall take precedence over a HNB Name present in the Allowed CSG list, which in turn shall take precedence over the broadcasted HNB Name. NOTE 2: The UEs Operator CSG List and Allowed CSG List are stored on the USIM or, optionally, in the ME a

41、s specified in section 5.3.2. NOTE 3: The HNB Name is necessary in order to aid the user in choosing the correct CSG identity when performing a manual CSG identity selection. ETSI ETSI TS 122 220 V14.0.0 (2017-03)113GPP TS 22.220 version 14.0.0 Release 145.5 Mobility Aspects for Home NodeB and Home

42、eNodeB 5.5.1 PLMN selection The standard automatic and manual network selection procedures are used to register a UE on a PLMN via a H(e)NB. 5.5.2 Idle-mode operation In addition to normal cell reselection procedures, the following requirements apply: - It shall be possible to support idle mode mobi

43、lity between a H(e)NB cell and other cells and between H(e)NB cells. - A UE in idle mode shall prefer to select a cell whose CSG Identity is in the UEs Allowed CSG List or in the Operator CSG list, when the cell reselection criteria has been met. NOTE: All CSG identities on the Allowed CSG list and

44、the Operator CSG list have the same priority. - The cell reselection procedure should not result in excessive power consumption in the UE. 5.5.3 Connected mode operation - It shall be possible to support service continuity, including handover, between a H(e)NB cell and other cells and between H(e)NB

45、 cells. This includes H(e)NB cells in residential and enterprise environment. - For operational and deployment purposes, handovers between a H(e)NB cell and other cells and between H(e)NB cells should not significantly increase mobility related signalling. - Data session(s) may be terminated by the

46、network after the UE leaves the H(e)NB coverage area on a per UE basis (e.g. based on subscriber tariff change). 5.5.4 Manual CSG selection The user shall be able to request the UE to perform a scan for available CSGs. When such request is received the UE shall perform a scan of available CSGs, thei

47、r CSG Identities and their HNB Names. In the UE display, the available CSGs shall be represented by their associated HNB Names and PLMN Name(s). If the HNB Name is not available, the CSG Identity shall be displayed instead. An indication shall be given to the user as to which of the available CSGs i

48、s contained in the Allowed CSG List or Operator CSG list. The available CSGs shall be displayed in the following order: - The CSGs, whose CSG Identities are contained in the Allowed CSG list. - The CSGs, whose CSG Identities are contained in the Operator CSG List. - Any other CSG, whose CSG Identity

49、 is not included in the Allowed CSG List or the Operator CSG list. The HPLMN shall configure, on a PLMN basis, the UE to display the available CSGs so that either: - all CSGs are displayed, or - only CSGs in the Operator CSG List are displayed. NOTE: It is assumed that OMA DM/OTA will be used by the HPLMN to configure the ME/USIM By default, the UE shall display all available CSGs for any PLMN, unless the UE has been configured by the HPLMN, for a specific PLMN, to display only CSGs in the Operator CSG List that are