ETSI TS 122 340-2016 Digital cellular telecommunications system (Phase 2+) Universal Mobile Telecommunications System (UMTS) LTE IP Multimedia Subsystem (IMS) messaging Stage 1 (V1.pdf

1、 ETSI TS 1Digital cellular telecoUniversal Mobile TelIP Multimedia S(3GPP TS 22.3TECHNICAL SPECIFICATION122 340 V13.0.0 (2016communications system (Phaelecommunications System (LTE; ia Subsystem (IMS) messagingStage 1 .340 version 13.0.0 Release 1316-01) hase 2+); (UMTS); ing; 13) ETSI ETSI TS 122 3

2、40 V13.0.0 (2016-01)13GPP TS 22.340 version 13.0.0 Release 13Reference RTS/TSGS-0122340vd00 Keywords GSM,LTE,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enre

3、gistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present do

4、cument shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive wi

5、thin ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present docum

6、ent, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by wri

7、tten permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2016. All rights reserved. DECTTM, PLUGTESTSTM, UM

8、TSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ET

9、SI TS 122 340 V13.0.0 (2016-01)23GPP TS 22.340 version 13.0.0 Release 13Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and

10、non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/).

11、Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present

12、 document. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being refere

13、nces to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“

14、, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 122 340 V13.0.0 (2016-01)33GPP TS 22.340 vers

15、ion 13.0.0 Release 13Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 4g3Introduction 4g31 Scope 5g32 References 5g33 Definitions, symbols and abbreviations . 6g33.1 Definitions 6g33.2 Abbreviations . 6g34 Informative description of messaging services in t

16、he IMS 7g35 Informative description of messaging types . 8g36 Immediate messaging requirements . 8g36.1 General requirements . 8g36.2 Message content requirements . 9g36.3 Management requirements . 9g36.4 Message delivery requirements 9g36.5 Storage requirements 10g36.6 User privacy requirements 10g

17、36.7 Message Filtering . 10g37 Session based messaging requirements 11g37.1 General requirements . 11g37.2 Message content requirements . 12g37.3 Management requirements . 13g37.4 Message delivery requirements 13g37.5 Storage requirements 13g37.6 User privacy requirements 14g37.7 Message Filtering .

18、 14g38 Addressing requirements 15g39 Security. 15g310 Charging . 15g311 Interworking . 16g311.1 General . 16g311.2 Requirements for SMS-Immediate Messaging service-level interworking 16g311.3 Requirements for SMS-Session based Messaging service-level interworking . 17g3Annex A (informative): Change

19、history . 19g3History 20g3ETSI ETSI TS 122 340 V13.0.0 (2016-01)43GPP TS 22.340 version 13.0.0 Release 13Foreword This Technical Specification has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may

20、 change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2

21、presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporate

22、d in the document. Introduction In todays world there are many different types of messaging services available both in the wired and wireless worlds. Some messaging services are supported in both environments; others are only to be found in one. The expectations of the services differ in that some a

23、re designed to be used in what is perceived as real time, whereas others are designed as a mailbox service where the message is stored ready for collection or delivery at a later stage. The 3GPP Technical Report TR22.940 identifies the issues and needs surrounding messaging solutions related to the

24、3GPP IP Multimedia Subsystem (IMS) taking into consideration use cases that illustrate the needs of both service providers and users. This Technical Specification takes the Technical Report into account when defining the requirements for the support of IMS Messaging. IMS Messaging services incorpora

25、tes one or more of the following messaging types Immediate messaging and Session based messaging. With Immediate messaging the sender expects immediate message delivery in what is perceived as real time. With Session based messaging a communications association is established between two or more use

26、rs before communication can take place. In the simplest form Session based messaging maybe a direct communication between two users. This specification defines the requirements for both the Immediate message type and the Session based message type. The specification provides the ability to develop i

27、nteroperable messaging services that use Immediate and/or Session based message types. ETSI ETSI TS 122 340 V13.0.0 (2016-01)53GPP TS 22.340 version 13.0.0 Release 131 Scope The present document specifies the stage one description of the IMS Messaging services. Stage one is an overall service descri

28、ption and defines service requirements, primarily from the subscribers and service providers points of view, and does not deal with the details of the human interface itself. The present TS includes information applicable to network operators, service providers and terminal, switch and database manu

29、facturers. The present TS contains the requirements for IMS Messaging services, which are sufficient to provide a complete service. The messaging types identified in this document are: immediate messaging and session based messaging. It is highly desirable that technical solutions for IMS Messaging

30、services should be sufficiently flexible to allow for possible enhancements. Additional functionalities not documented in this 3GPP TS may implement requirements which are considered outside the scope of this 3GPP TS. Such additional functionality shall not compromise conformance to the core require

31、ments of the service. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. For a specific

32、 reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present docu

33、ment. 1 Void 2 3GPP TS 22.250: 3rdGeneration Partnership Project; Technical Specification Group Services and System Aspects; Stage 1, IMS Group Management 3 RFC 2486: “The Network Access Identifier“ 4 3GPP TS 21.133; 3rdGeneration Partnership Project; Technical Specification Group Services and Syste

34、m Aspects; 3G Security; Security Threats and Requirements 5 3GPP TS 26.140; 3rdGeneration Partnership Project; Technical Specification Group Services and System Aspects; Multimedia Messaging Service (MMS); Media formats and codecs 6 3GPP TS 26.234: “End-to-end transparent streaming Service (PSS); Pr

35、otocols and Codecs“. 7 3GPP TS 22.228; 3rdGeneration Partnership Project; Technical Specification Group Services and System Aspects; Service requirements for the Internet Protocol (IP) multimedia core network subsystem; Stage 1 8 3GPP TS 26.244: “Transparent end-to-end packet switched streaming serv

36、ice (PSS); 3GPP file format (3GP); 9 3GPP TS 26.245: “Transparent end-to-end packet switched streaming service (PSS); Timed text format. ETSI ETSI TS 122 340 V13.0.0 (2016-01)63GPP TS 22.340 version 13.0.0 Release 133 Definitions, symbols and abbreviations 3.1 Definitions Immediate messaging: A type

37、 of IMS Messaging service by which the sender expects immediate message delivery in (near) real time fashion IMS Messaging services: A group of services, supported by capabilities of the 3GPP IP Multimedia Subsystem 3GPP TS 22.228 7, that allows an IMS user to send and receive messages to other user

38、s. IMS messaging services comprise of one or more types: Immediate messaging and Session based messaging. Session based messaging: A type of IMS Messaging service by which the sender expects immediate message delivery in (near) real time fashion . In addition the sender(s) and the receiver(s) have t

39、o join to a messaging session e.g. chat room, before message exchange can take place 3.2 Abbreviations IP Internet Protocol IMS IP Multimedia Subsystem OMA Open Mobile Alliance ETSI ETSI TS 122 340 V13.0.0 (2016-01)73GPP TS 22.340 version 13.0.0 Release 134 Informative description of messaging servi

40、ces in the IMS As 3GPP has developed the concept of IMS it is thought useful to consider how a SIP based IP network can be utilised to provide messaging capabilities. One of the chief characteristics of SIP is its ability to rapidly and efficiently create real-time sessions between groups of users.

41、It therefore appears that SIP based messaging would be a potential candidate to provide the equivalent of Chat Room and Instant Messaging (IM) type services found on the Internet today. Typical characteristics instant messaging are instant delivery of the messages to the targeted recipient(s) and in

42、teraction with presence information where users are able to see who is on-line as well as their status. A chat room is a “place“ where multiple persons can join, follow and contribute to the ongoing discussion and leave the “room“ at any time. Chat rooms are more permanent in nature when compared to

43、 IM exchanges and may be created by users or service providers. Additionally, chat rooms can be further divided to the private and public chat rooms. Normally, users who are participating in chat room will receive all the messages that are sent by the other participants. Similarly, the users are als

44、o able to send private messages to the chat room or even privately to some participant. Unfortunately, the most popular internet based instant messaging services are usually based upon closed and proprietary protocols which has made it impossible for different service providers to allow interoperabl

45、e messaging between their respective users. Additionally, internet based services do not take into consideration the wireless environment and the needs of operators to provide services that are commercially viable by for example, providing support for charging. This technical specification will furt

46、her elaborate the essential messaging characteristic of these services and state how they may be enhanced, e.g. operators may be able to create and then advertise chat rooms containing specific content where users who join the room may be charged an entrance fee, Join to chat Harry Amanda Peter Ken

47、Invite Amanda to join to chat Join to chat Message Message Message Send a private message to Ken Chat Server Figure 1. Example IMS Messaging service: Chat room ETSI ETSI TS 122 340 V13.0.0 (2016-01)83GPP TS 22.340 version 13.0.0 Release 135 Informative description of messaging types Messaging can be

48、 divided to two different main classes based on the expectation of the sender. The sender either expects the message to be delivered immediately or he does not care so much whether the message is delivered immediately or later. The immediate case can be further divided to two different sub-classes b

49、ased on the actions required form the user before he can engage in a communication. The user can both send and receive messages without any prior actions or he may be required to join to a messaging session before the message exchange can take place. The messaging types considered in this specification are - Immediate messaging: Typically, sender is aware of the availability of the recipient(s) (possibly through the use of the Presence service) before sending this type of message as, if the recipient is not available, the message may b