ETSI TS 122 340-2017 Digital cellular telecommunications system (Phase 2+) (GSM) Universal Mobile Telecommunications System (UMTS) LTE IP Multimedia Subsystem (IMS) messaging Stage.pdf

1、 ETSI TS 122 340 V14.0.0 (2017-03) Digital cellular telecommunications system (Phase 2+) (GSM); Universal Mobile Telecommunications System (UMTS); LTE; IP Multimedia Subsystem (IMS) messaging; Stage 1 (3GPP TS 22.340 version 14.0.0 Release 14) TECHNICAL SPECIFICATION ETSI ETSI TS 122 340 V14.0.0 (20

2、17-03)13GPP TS 22.340 version 14.0.0 Release 14Reference RTS/TSGS-0122340ve00 Keywords GSM,LTE,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous

3、-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall n

4、ot be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secr

5、etariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document,

6、 please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written

7、 permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2017. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTM

8、and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI T

9、S 122 340 V14.0.0 (2017-03)23GPP TS 22.340 version 14.0.0 Release 14Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-

10、members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Purs

11、uant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present doc

12、ument. Foreword The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identitie

13、s can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal fo

14、rms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 122 340 V14.0.0 (2017-03)33GPP TS 22.340 version 14.0.0 Release 14Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Fore

15、word . 4g3Introduction 4g31 Scope 5g32 References 5g33 Definitions, symbols and abbreviations . 6g33.1 Definitions 6g33.2 Abbreviations . 6g34 Informative description of messaging services in the IMS 7g35 Informative description of messaging types . 8g36 Immediate messaging requirements . 8g36.1 Gen

16、eral requirements . 8g36.2 Message content requirements . 9g36.3 Management requirements . 9g36.4 Message delivery requirements 9g36.5 Storage requirements 10g36.6 User privacy requirements 10g36.7 Message Filtering . 10g37 Session based messaging requirements 11g37.1 General requirements . 11g37.2

17、Message content requirements . 12g37.3 Management requirements . 13g37.4 Message delivery requirements 13g37.5 Storage requirements 13g37.6 User privacy requirements 14g37.7 Message Filtering . 14g38 Addressing requirements 15g39 Security. 15g310 Charging . 15g311 Interworking . 16g311.1 General . 1

18、6g311.2 Requirements for SMS-Immediate Messaging service-level interworking 16g311.3 Requirements for SMS-Session based Messaging service-level interworking . 17g3Annex A (informative): Change history . 19g3History 20g3ETSI ETSI TS 122 340 V14.0.0 (2017-03)43GPP TS 22.340 version 14.0.0 Release 14Fo

19、reword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, i

20、t will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y

21、the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. Introduction In todays world there are many different types of messaging services

22、 available both in the wired and wireless worlds. Some messaging services are supported in both environments; others are only to be found in one. The expectations of the services differ in that some are designed to be used in what is perceived as real time, whereas others are designed as a mailbox s

23、ervice where the message is stored ready for collection or delivery at a later stage. The 3GPP Technical Report TR22.940 identifies the issues and needs surrounding messaging solutions related to the 3GPP IP Multimedia Subsystem (IMS) taking into consideration use cases that illustrate the needs of

24、both service providers and users. This Technical Specification takes the Technical Report into account when defining the requirements for the support of IMS Messaging. IMS Messaging services incorporates one or more of the following messaging types Immediate messaging and Session based messaging. Wi

25、th Immediate messaging the sender expects immediate message delivery in what is perceived as real time. With Session based messaging a communications association is established between two or more users before communication can take place. In the simplest form Session based messaging maybe a direct

26、communication between two users. This specification defines the requirements for both the Immediate message type and the Session based message type. The specification provides the ability to develop interoperable messaging services that use Immediate and/or Session based message types. ETSI ETSI TS

27、122 340 V14.0.0 (2017-03)53GPP TS 22.340 version 14.0.0 Release 141 Scope The present document specifies the stage one description of the IMS Messaging services. Stage one is an overall service description and defines service requirements, primarily from the subscribers and service providers points

28、of view, and does not deal with the details of the human interface itself. The present TS includes information applicable to network operators, service providers and terminal, switch and database manufacturers. The present TS contains the requirements for IMS Messaging services, which are sufficient

29、 to provide a complete service. The messaging types identified in this document are: immediate messaging and session based messaging. It is highly desirable that technical solutions for IMS Messaging services should be sufficiently flexible to allow for possible enhancements. Additional functionalit

30、ies not documented in this 3GPP TS may implement requirements which are considered outside the scope of this 3GPP TS. Such additional functionality shall not compromise conformance to the core requirements of the service. 2 References The following documents contain provisions which, through referen

31、ce in this text, constitute provisions of the present document. References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version appl

32、ies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 Void 2 3GPP TS 22.250: 3rdGeneration Partnership Project; Technical Specification Group Serv

33、ices and System Aspects; Stage 1, IMS Group Management 3 RFC 2486: “The Network Access Identifier“ 4 3GPP TS 21.133; 3rdGeneration Partnership Project; Technical Specification Group Services and System Aspects; 3G Security; Security Threats and Requirements 5 3GPP TS 26.140; 3rdGeneration Partnershi

34、p Project; Technical Specification Group Services and System Aspects; Multimedia Messaging Service (MMS); Media formats and codecs 6 3GPP TS 26.234: “End-to-end transparent streaming Service (PSS); Protocols and Codecs“. 7 3GPP TS 22.228; 3rdGeneration Partnership Project; Technical Specification Gr

35、oup Services and System Aspects; Service requirements for the Internet Protocol (IP) multimedia core network subsystem; Stage 1 8 3GPP TS 26.244: “Transparent end-to-end packet switched streaming service (PSS); 3GPP file format (3GP)”; 9 3GPP TS 26.245: “Transparent end-to-end packet switched stream

36、ing service (PSS); Timed text format”. ETSI ETSI TS 122 340 V14.0.0 (2017-03)63GPP TS 22.340 version 14.0.0 Release 143 Definitions, symbols and abbreviations 3.1 Definitions Immediate messaging: A type of IMS Messaging service by which the sender expects immediate message delivery in (near) real ti

37、me fashion IMS Messaging services: A group of services, supported by capabilities of the 3GPP IP Multimedia Subsystem 3GPP TS 22.228 7, that allows an IMS user to send and receive messages to other users. IMS messaging services comprise of one or more types: Immediate messaging and Session based mes

38、saging. Session based messaging: A type of IMS Messaging service by which the sender expects immediate message delivery in (near) real time fashion . In addition the sender(s) and the receiver(s) have to join to a messaging session e.g. chat room, before message exchange can take place 3.2 Abbreviat

39、ions IP Internet Protocol IMS IP Multimedia Subsystem OMA Open Mobile Alliance ETSI ETSI TS 122 340 V14.0.0 (2017-03)73GPP TS 22.340 version 14.0.0 Release 144 Informative description of messaging services in the IMS As 3GPP has developed the concept of IMS it is thought useful to consider how a SIP

40、 based IP network can be utilised to provide messaging capabilities. One of the chief characteristics of SIP is its ability to rapidly and efficiently create real-time sessions between groups of users. It therefore appears that SIP based messaging would be a potential candidate to provide the equiva

41、lent of “Chat Room” and “Instant Messaging” (IM) type services found on the Internet today. Typical characteristics instant messaging are instant delivery of the messages to the targeted recipient(s) and interaction with presence information where users are able to see who is on-line as well as thei

42、r status. A chat room is a “place“ where multiple persons can join, follow and contribute to the ongoing discussion and leave the “room“ at any time. Chat rooms are more permanent in nature when compared to IM exchanges and may be created by users or service providers. Additionally, chat rooms can b

43、e further divided to the private and public chat rooms. Normally, users who are participating in chat room will receive all the messages that are sent by the other participants. Similarly, the users are also able to send private messages to the chat room or even privately to some participant. Unfort

44、unately, the most popular internet based instant messaging services are usually based upon closed and proprietary protocols which has made it impossible for different service providers to allow interoperable messaging between their respective users. Additionally, internet based services do not take

45、into consideration the wireless environment and the needs of operators to provide services that are commercially viable by for example, providing support for charging. This technical specification will further elaborate the essential messaging characteristic of these services and state how they may

46、be enhanced, e.g. operators may be able to create and then advertise chat rooms containing specific content where users who join the room may be charged an entrance fee, Join to chat Harry Amanda Peter Ken Invite Amanda to join to chat Join to chat Message Message Message Send a private message to K

47、en Chat Server Figure 1. Example IMS Messaging service: Chat room ETSI ETSI TS 122 340 V14.0.0 (2017-03)83GPP TS 22.340 version 14.0.0 Release 145 Informative description of messaging types Messaging can be divided to two different main classes based on the expectation of the sender. The sender eith

48、er expects the message to be delivered immediately or he does not care so much whether the message is delivered immediately or later. The immediate case can be further divided to two different sub-classes based on the actions required form the user before he can engage in a communication. The user c

49、an both send and receive messages without any prior actions or he may be required to join to a messaging session before the message exchange can take place. The messaging types considered in this specification are - Immediate messaging: Typically, sender is aware of the availability of the recipient(s) (possibly through the use of the Presence service) before sending this type of message as, if the recipient is not available, the message may be discarded or deferred. An immediate message may be deferred by the recipients network based on th