ETSI TS 123 087-2017 Digital cellular telecommunications system (Phase 2+) (GSM) Universal Mobile Telecommunications System (UMTS) User-to-User Signalling (UUS) supplementary servi.pdf

1、 ETSI TS 123 087 V14.0.0 (2017-04) Digital cellular telecommunications system (Phase 2+) (GSM); Universal Mobile Telecommunications System (UMTS); User-to-User Signalling (UUS) supplementary service; Stage 2 (3GPP TS 23.087 version 14.0.0 Release 14) floppy3TECHNICAL SPECIFICATION GLOBAL SYSTEM FOR

2、MOBILE COMMUNICATIONSRETSI ETSI TS 123 087 V14.0.0 (2017-04)13GPP TS 23.087 version 14.0.0 Release 14Reference RTS/TSGC-0423087ve00 Keywords GSM,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742

3、 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and

4、/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version

5、 kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatu

6、s.aspx If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocop

7、ying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2017

8、. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks regist

9、ered and owned by the GSM Association. ETSI ETSI TS 123 087 V14.0.0 (2017-04)23GPP TS 23.087 version 14.0.0 Release 14Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if an

10、y, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available o

11、n the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or m

12、ay be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by the ETSI 3rdGeneration Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identi

13、ties. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “s

14、hould not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI

15、 TS 123 087 V14.0.0 (2017-04)33GPP TS 23.087 version 14.0.0 Release 14Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 5g31 Scope 6g32 References 6g33 Definitions and abbreviations . 6g33.1 Definitions 6g33.2 Abbreviations . 7g34 General . 7g34.1 Activatio

16、n of UUS components 7g34.1.1 Implicit request . 7g34.1.2 Explicit request . 8g34.1.3 UUS required option . 8g35 Handling of User-to-user signalling . 8g35.1 Timers 8g35.2 Information flows of UUS services 9g35.2.1 Service 1 (UUS1) 9g35.2.1.1 Flow control 9g35.2.1.2 Information flows 10g35.2.1.2.1 Im

17、plicit activation 11g35.2.1.2.2 Explicit activation 12g35.2.2 Service 2 (UUS2) 13g35.2.2.1 Flow control 13g35.2.2.2 Information flows 13g35.2.3 Service 3 (UUS3) 15g35.2.3.1 Flow control 15g35.2.3.2 Information flows 16g35.3 Messages and their contents . 19g35.3.1 Information elements used in the mes

18、sages 19g35.3.2 Messages between MS and MSC 19g35.3.3 Messages between MSC and VLR (B interface) 20g35.3.4 Messages between MSC MSC (E interface) 20g36 Interaction with other supplementary services . 21g36.1 Call forwarding unconditional (CFU) 21g36.2 Call forwarding on mobile subscriber busy (CFB)

19、. 21g36.3 Call forwarding on no reply (CFNRy) . 21g36.4 Call forwarding on mobile subscriber not reachable (CFNRc) 21g36.5 Call waiting (CW) 21g36.6 Call hold (HOLD) 21g36.7 Completion of calls to busy subscribers (CCBS) . 22g36.8 Explicit call transfer (ECT) 22g36.9 Multi party service (MPTY) . 22g

20、36.10 Advice of charge (AoC) . 22g36.11 Barring of outgoing calls (BAOC) . 22g36.12 Barring of outgoing international calls (BOIC) 22g36.13 Barring of outgoing international calls except those directed to the home PLMN country (BOIC-exHC) 22g36.14 Barring of incoming calls (BAIC) 22g36.15 Barring of

21、 incoming calls when roaming outside the home PLMN country (BIC-Roam) . 22g36.16 Call deflection (CD) . 22g37 Interaction with other network features 23g37.1 Customised Applications for Mobile network Enhanced Logic (CAMEL) . 23g3ETSI ETSI TS 123 087 V14.0.0 (2017-04)43GPP TS 23.087 version 14.0.0 R

22、elease 147.2 Support for Optimal Routeing(SOR) 23g38 Interworking with other networks 23g38.1 Interworking with GSM PLMN/ISDN network supporting only a maximum User-user information element length of 35 octets . 23g38.2 Interworking with non-ISDN network . 23g39 Network entity functions 24g39.1 Orig

23、inating network processes . 24g39.1.1 Procedures in MSC . 24g39.1.2 Procedures in VLR 28g39.2 Terminating network processes 29g39.2.1 Procedures in GMSC 29g39.2.2 Procedures in MSC . 30g39.3 Procedures common in serving and remote networks 36g39.4 Processes used during Active Call . 46g39.4.1 Proces

24、s and procedures in serving MSC . 46g39.4.2 Process and procedures in serving VLR . 52g39.4.3 Process and procedures in remote MSC . 53g310 Information stored in the HLR and in the VLR . 57g310.1 Information stored in the HLR . 57g310.2 Transfer of information from HLR to VLR 57g310.3 Information st

25、ored in the VLR . 57g311 State transition model . 57g312 Handover 57g3Annex A (informative): Change history . 58g3History 59g3ETSI ETSI TS 123 087 V14.0.0 (2017-04)53GPP TS 23.087 version 14.0.0 Release 14Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership

26、 Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release date and an increase i

27、n version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, co

28、rrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TS 123 087 V14.0.0 (2017-04)63GPP TS 23.087 version 14.0.0 Release 141 Scope The present document gives the stage 2 description of the User-to-User signalling suppl

29、ementary services. The User-to-user supplementary service is divided into 3 different services: - Service 1 (UUS1) - Service 2 (UUS2) - Service 3 (UUS3) 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. - Ref

30、erences are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. - For a specific reference, subsequent revisions do not apply. - For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a

31、 GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP TS 21.905: “3G Vocabulary“. 2 3GPP TS 22.087: “User-to-user signalling (UUS); Stage 1“. 3 3GPP TS 23.018: “Basic Call Handling Technical Realization“.

32、 4 3GPP TS 23.078: “CAMEL Stage 2“. 5 3GPP TS 23.079: “Support for Optimal Routeing (SOR) Technical Realization“. 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the following terms and definitions apply. Burst parameter: parameter indicating the absolute ma

33、ximum number of UUS 3 service related user information messages that can be sent at intervals indicated by the value of timer T2-UUS3 Remote network: network of the remote subscriber Remote subscriber: for service 1 and 2 the remote subscriber is the called party of a call to which the served subscr

34、iber activates the UUS supplementary service. For service 3 the remote subscriber can be either the called or the calling party of an established call to whom the use of the UUS supplementary service is requested by the served subscriber Served subscriber: subscriber who has a provision of the UUS s

35、upplementary service and who activates the UUS supplementary service. For service 1 and 2 the served subscriber is always the calling subscriber, for service 3 either the calling or the called subscriber can be the served subscriber Serving network: network of the served subscriber User-to-User Info

36、rmation (UUI): information transferred by using the UUS supplementary service ETSI ETSI TS 123 087 V14.0.0 (2017-04)73GPP TS 23.087 version 14.0.0 Release 14UUS Service: UUS services (Service 1, 2 and 3) are components of the UUS supplementary service. If the UUS supplementary service is provided to

37、 a subscriber, he can handle the UUS services independently within a call 3.2 Abbreviations For the purposes of the present document, the following abbreviations apply: ACM Address Complete Message ANM ANswer Message CON CONnectCPG Call ProGress IAM Initial Address Message MS Mobile Station REL RELe

38、ase SIFOC Send Info For Outgoing Call SRI Send Routing Info UUI User-to-User Information UUS User-to-User SignallingUUS1 User-to-User Signalling Service 1 UUS2 User-to-User Signalling Service 2 UUS3 User-to-User Signalling Service 3 Further GSM related abbreviations are listed in GSM 01.04. 4 Genera

39、l The UUS supplementary service allows the transfer of UUI to a remote subscriber over the signalling channel in association with a call to this subscriber. The UUS supplementary service is divided in Service 1, Service 2 and Service 3. The UUS Service 1 allows the transfer of UUI embedded within Ca

40、ll Control messages. The UUS Service 2 allows the transfer of UUI with a specific User-to-user message after the served subscriber has received an address complete indication and prior to the answer indication from the B-side. The UUS Service 3 allows the transfer of UUI with a specific User-to-user

41、 message during an active call. For the use of the UUS supplementary service in GSM PLMNs the support of UUS capabilities within the inter-exchange signalling system (e.g. ISUP) is necessary. However this is out of scope of the present document. 4.1 Activation of UUS components If any of the UUS Ser

42、vices 1, 2 or 3 shall be used within a call, the UUS capabilities have to be activated by the served subscriber either when initiating this outgoing call (Service 1, 2 and 3) or during an established call (Service 3). The UUS capabilities for a call can be requested by means of an implicit request o

43、r an explicit request. UUS Service 1 can be requested either implicitly or explicitly. Service 2 and 3 can only be requested explicitly. 4.1.1 Implicit request The UUS1 service is activated implicitly by the presence of UUI in the set-up request from the mobile station. The network shall transfer th

44、e received UUI transparently to the B-side. For the purpose of UUS service 1 implicitly requested, no explicit check for the availability of UUS capabilities at the destination network has to be performed by the originating network. If the calling subscriber has UUS 1 provisioned and implicitly requ

45、ested, the network shall transfer all UUI contained in call control messages. If the calling subscriber has UUS1 not provisioned, the contained UUI shall be discarded by the serving MSC. The call shall be established without further restrictions. ETSI ETSI TS 123 087 V14.0.0 (2017-04)83GPP TS 23.087

46、 version 14.0.0 Release 14The served subscriber shall not be informed whether the implicit request was successful or not. 4.1.2 Explicit request Any UUS Service can be explicitly activated by the served subscriber within the set-up request initiating a mobile originated call. In addition UUS Service

47、 3 can be activated during an established call with a Facility message. A UUS Service 1 request can be accompanied by appropriate UUI. The network shall check for the availability of UUS capabilities for the call by passing the UUS request and the eventually accompanied UUI to the remote side. If a

48、UUS Service is available for the call an appropriate “UUS provided“ indication for this UUS Service shall be sent within the first backward message from the remote side. A UUS Service shall not be activated for the call if a “UUS not provided“ indication or no indication about the availability of th

49、is UUS Service is received from the remote side. Service 3 can be explicitly activated during an active call by both parties. This may lead to a collision of activation requests. The collision of activation requests occurs when there is an outstanding request for service 3 and a subsequent request is received from the remote user. The entity (user or network) that observes the collision shall reject the second request with Facility message. This leads to the rejection of both requests. 4.1.3 UUS required option As an option at call set-up the served subscri