ETSI TS 123 087-2018 Digital cellular telecommunications system (Phase 2+) (GSM) Universal Mobile Telecommunications System (UMTS) User-to-User Signalling (UUS) supplementary servi_1.pdf

1、 ETSI TS 123 087 V15.0.0 (2018-07) Digital cellular telecommunications system (Phase 2+) (GSM); Universal Mobile Telecommunications System (UMTS); User-to-User Signalling (UUS) supplementary service; Stage 2 (3GPP TS 23.087 version 15.0.0 Release 15) TECHNICAL SPECIFICATION GLOBAL SYSTEM FOR MOBILE

2、COMMUNICATIONSRETSI ETSI TS 123 087 V15.0.0 (2018-07)13GPP TS 23.087 version 15.0.0 Release 15Reference RTS/TSGC-0423087vf00 Keywords GSM,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Asso

3、ciation but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or pri

4、nt versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept o

5、n a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx

6、If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying an

7、d microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. ETSI 2018. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTM

8、and the ETSI logo are trademarks of ETSI registered for the benefit of its Members. 3GPPTM and LTETMare trademarks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members. GSMand the GSM logo are trademarks re

9、gistered and owned by the GSM Association. ETSI ETSI TS 123 087 V15.0.0 (2018-07)23GPP TS 23.087 version 15.0.0 Release 15Intellectual Property Rights Essential patents IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information pertaining to the

10、se essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest

11、 updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web

12、 server) which are, or may be, or may become, essential to the present document. Trademarks The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners. ETSI claims no ownership of these except for any which are indicated as being the property o

13、f ETSI, and conveys no right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks. Foreword This Technical Specification (TS) has been

14、 produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross referen

15、ce between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in cla

16、use 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 123 087 V15.0.0 (2018-07)33GPP TS 23.087 version 15.0.0 Release 15Contents Intellectual Property Rights 2g3

17、Foreword . 2g3Modal verbs terminology 2g3Foreword . 5g31 Scope 6g32 References 6g33 Definitions and abbreviations . 6g33.1 Definitions 6g33.2 Abbreviations . 7g34 General . 7g34.1 Activation of UUS components 7g34.1.1 Implicit request . 7g34.1.2 Explicit request . 8g34.1.3 UUS required option . 8g35

18、 Handling of User-to-user signalling . 8g35.1 Timers 8g35.2 Information flows of UUS services 9g35.2.1 Service 1 (UUS1) 9g35.2.1.1 Flow control 9g35.2.1.2 Information flows 9g35.2.1.2.1 Implicit activation 10g35.2.1.2.2 Explicit activation 11g35.2.2 Service 2 (UUS2) 12g35.2.2.1 Flow control 12g35.2.

19、2.2 Information flows 12g35.2.3 Service 3 (UUS3) 14g35.2.3.1 Flow control 14g35.2.3.2 Information flows 15g35.3 Messages and their contents . 18g35.3.1 Information elements used in the messages 18g35.3.2 Messages between MS and MSC 18g35.3.3 Messages between MSC and VLR (B interface) 19g35.3.4 Messa

20、ges between MSC MSC (E interface) 19g36 Interaction with other supplementary services . 20g36.1 Call forwarding unconditional (CFU) 20g36.2 Call forwarding on mobile subscriber busy (CFB) . 20g36.3 Call forwarding on no reply (CFNRy) . 20g36.4 Call forwarding on mobile subscriber not reachable (CFNR

21、c) 20g36.5 Call waiting (CW) 20g36.6 Call hold (HOLD) 20g36.7 Completion of calls to busy subscribers (CCBS) . 21g36.8 Explicit call transfer (ECT) 21g36.9 Multi party service (MPTY) . 21g36.10 Advice of charge (AoC) . 21g36.11 Barring of outgoing calls (BAOC) . 21g36.12 Barring of outgoing internat

22、ional calls (BOIC) 21g36.13 Barring of outgoing international calls except those directed to the home PLMN country (BOIC-exHC) 21g36.14 Barring of incoming calls (BAIC) 21g36.15 Barring of incoming calls when roaming outside the home PLMN country (BIC-Roam) . 21g36.16 Call deflection (CD) . 21g37 In

23、teraction with other network features 22g37.1 Customised Applications for Mobile network Enhanced Logic (CAMEL) . 22g3ETSI ETSI TS 123 087 V15.0.0 (2018-07)43GPP TS 23.087 version 15.0.0 Release 157.2 Support for Optimal Routeing(SOR) 22g38 Interworking with other networks 22g38.1 Interworking with

24、GSM PLMN/ISDN network supporting only a maximum User-user information element length of 35 octets . 22g38.2 Interworking with non-ISDN network . 22g39 Network entity functions 22g39.1 Originating network processes . 22g39.1.1 Procedures in MSC . 22g39.1.2 Procedures in VLR 26g39.2 Terminating networ

25、k processes 27g39.2.1 Procedures in GMSC 27g39.2.2 Procedures in MSC . 28g39.3 Procedures common in serving and remote networks 34g39.4 Processes used during Active Call . 44g39.4.1 Process and procedures in serving MSC . 44g39.4.2 Process and procedures in serving VLR . 50g39.4.3 Process and proced

26、ures in remote MSC . 51g310 Information stored in the HLR and in the VLR . 55g310.1 Information stored in the HLR . 55g310.2 Transfer of information from HLR to VLR 55g310.3 Information stored in the VLR . 55g311 State transition model . 55g312 Handover 55g3Annex A (informative): Change history . 56

27、g3History 57g3ETSI ETSI TS 123 087 V15.0.0 (2018-07)53GPP TS 23.087 version 15.0.0 Release 15Foreword This Technical Specification (TS) has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change

28、 following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 present

29、ed to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in th

30、e document. ETSI ETSI TS 123 087 V15.0.0 (2018-07)63GPP TS 23.087 version 15.0.0 Release 151 Scope The present document gives the stage 2 description of the User-to-User signalling supplementary services. The User-to-user supplementary service is divided into 3 different services: - Service 1 (UUS1)

31、 - Service 2 (UUS2) - Service 3 (UUS3) 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. - References are either specific (identified by date of publication, edition number, version number, etc.) or non-speci

32、fic. - For a specific reference, subsequent revisions do not apply. - For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Rele

33、ase as the present document. 1 3GPP TS 21.905: “3G Vocabulary“. 2 3GPP TS 22.087: “User-to-user signalling (UUS); Stage 1“. 3 3GPP TS 23.018: “Basic Call Handling Technical Realization“. 4 3GPP TS 23.078: “CAMEL Stage 2“. 5 3GPP TS 23.079: “Support for Optimal Routeing (SOR) Technical Realization“.

34、3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the following terms and definitions apply. Burst parameter: parameter indicating the absolute maximum number of UUS 3 service related user information messages that can be sent at intervals indicated by the val

35、ue of timer T2-UUS3 Remote network: network of the remote subscriber Remote subscriber: for service 1 and 2 the remote subscriber is the called party of a call to which the served subscriber activates the UUS supplementary service. For service 3 the remote subscriber can be either the called or the

36、calling party of an established call to whom the use of the UUS supplementary service is requested by the served subscriber Served subscriber: subscriber who has a provision of the UUS supplementary service and who activates the UUS supplementary service. For service 1 and 2 the served subscriber is

37、 always the calling subscriber, for service 3 either the calling or the called subscriber can be the served subscriber Serving network: network of the served subscriber User-to-User Information (UUI): information transferred by using the UUS supplementary service UUS Service: UUS services (Service 1

38、, 2 and 3) are components of the UUS supplementary service. If the UUS supplementary service is provided to a subscriber, he can handle the UUS services independently within a call ETSI ETSI TS 123 087 V15.0.0 (2018-07)73GPP TS 23.087 version 15.0.0 Release 153.2 Abbreviations For the purposes of th

39、e present document, the following abbreviations apply: ACM Address Complete Message ANM ANswer Message CON CONnectCPG Call ProGress IAM Initial Address Message MS Mobile Station REL RELease SIFOC Send Info For Outgoing Call SRI Send Routing Info UUI User-to-User Information UUS User-to-User Signalli

40、ngUUS1 User-to-User Signalling Service 1 UUS2 User-to-User Signalling Service 2 UUS3 User-to-User Signalling Service 3 Further GSM related abbreviations are listed in GSM 01.04. 4 General The UUS supplementary service allows the transfer of UUI to a remote subscriber over the signalling channel in a

41、ssociation with a call to this subscriber. The UUS supplementary service is divided in Service 1, Service 2 and Service 3. The UUS Service 1 allows the transfer of UUI embedded within Call Control messages. The UUS Service 2 allows the transfer of UUI with a specific User-to-user message after the s

42、erved subscriber has received an address complete indication and prior to the answer indication from the B-side. The UUS Service 3 allows the transfer of UUI with a specific User-to-user message during an active call. For the use of the UUS supplementary service in GSM PLMNs the support of UUS capab

43、ilities within the inter-exchange signalling system (e.g. ISUP) is necessary. However this is out of scope of the present document. 4.1 Activation of UUS components If any of the UUS Services 1, 2 or 3 shall be used within a call, the UUS capabilities have to be activated by the served subscriber ei

44、ther when initiating this outgoing call (Service 1, 2 and 3) or during an established call (Service 3). The UUS capabilities for a call can be requested by means of an implicit request or an explicit request. UUS Service 1 can be requested either implicitly or explicitly. Service 2 and 3 can only be

45、 requested explicitly. 4.1.1 Implicit request The UUS1 service is activated implicitly by the presence of UUI in the set-up request from the mobile station. The network shall transfer the received UUI transparently to the B-side. For the purpose of UUS service 1 implicitly requested, no explicit che

46、ck for the availability of UUS capabilities at the destination network has to be performed by the originating network. If the calling subscriber has UUS 1 provisioned and implicitly requested, the network shall transfer all UUI contained in call control messages. If the calling subscriber has UUS1 n

47、ot provisioned, the contained UUI shall be discarded by the serving MSC. The call shall be established without further restrictions. The served subscriber shall not be informed whether the implicit request was successful or not. ETSI ETSI TS 123 087 V15.0.0 (2018-07)83GPP TS 23.087 version 15.0.0 Re

48、lease 154.1.2 Explicit request Any UUS Service can be explicitly activated by the served subscriber within the set-up request initiating a mobile originated call. In addition UUS Service 3 can be activated during an established call with a Facility message. A UUS Service 1 request can be accompanied

49、 by appropriate UUI. The network shall check for the availability of UUS capabilities for the call by passing the UUS request and the eventually accompanied UUI to the remote side. If a UUS Service is available for the call an appropriate “UUS provided“ indication for this UUS Service shall be sent within the first backward message from the remote side. A UUS Service shall not be activated for the call if a “UUS not provided“ indication or no indication about the availability of this UUS Service is received from the remote side. Service 3 can be explicitly act