ETSI TS 123 240-2016 Universal Mobile Telecommunications System (UMTS) LTE 3GPP Generic User Profile (GUP) Architecture (Stage 2) (V13 0 0 3GPP TS 23 240 version 13 0 0 Release 13).pdf

1、 ETSI TS 1Universal Mobile Tel3GPP GenArch(3GPP TS 23.2TECHNICAL SPECIFICATION123 240 V13.0.0 (2016elecommunications System (LTE; eneric User Profile (GUP); rchitecture (Stage 2) .240 version 13.0.0 Release 1316-01) (UMTS); 13) ETSI ETSI TS 123 240 V13.0.0 (2016-01)13GPP TS 23.240 version 13.0.0 Rel

2、ease 13Reference RTS/TSGS-0223240vd00 Keywords LTE,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Importan

3、t notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written aut

4、horization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document shoul

5、d be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following serv

6、ices: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version sh

7、all not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2016. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered f

8、or the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 123 240 V13.0.0 (2016-01)23GPP TS 23.240 version 13.

9、0.0 Release 13Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intelle

10、ctual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, includi

11、ng IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has

12、been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross ref

13、erence between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in

14、 clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 123 240 V13.0.0 (2016-01)33GPP TS 23.240 version 13.0.0 Release 13Contents Intellectual Property Rights

15、 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 5g3Introduction 5g31 Scope 6g32 References 6g33 Definitions, symbols and abbreviations . 6g33.1 Definitions 6g33.2 Symbols 7g33.3 Abbreviations . 7g34 Reference Architecture . 7g34.1 GUP Functionalities . 7g34.1.1 Harmonized access interface. 7

16、g34.1.2 Single point of access . 7g34.1.3 Authentication of profile access 7g34.1.4 Authorization of profile access . 7g34.1.5 Privacy control 8g34.1.6 Synchronization of data storage 8g34.1.7 Access of profile from visited network . 8g34.1.8 Location of Profile Components . 8g34.1.9 Charging for pr

17、ofile access . 8g34.2 GUP functional entities 9g34.2.1 GUP Server . 10g34.2.1.1 Single point of access 11g34.2.1.2 Location of profile components 12g34.2.1.3 Authentication of profile request . 12g34.2.1.4 Authorization of profile request 12g34.2.1.5 Synchronization of profile components 12g34.2.1.6

18、 Additional functionality 12g34.2.2 Repository Access Function (RAF) 12g34.2.3 GUP Data Repository . 13g34.2.4 Reference Points . 13g34.2.5 Applications 13g34.2.6 Message flow of using GUP . 13g34.3 Rg reference point procedures 15g34.3.1 Create procedure . 16g34.3.2 Delete procedure. 17g34.3.2a Lis

19、t procedure . 17g34.3.3 Modify procedure . 18g34.3.4 Query procedure . 19g34.3.5 Subscribe procedure 20g34.3.6 Unsubscribe procedure . 21g34.3.7 Notify procedure . 21g34.3.8 Common information definitions 22g34.3.8.1 Requestor data . 22g34.3.8.2 Redirection data 22g34.3.9 Error handling and common e

20、rror types . 22g34.4 Rp reference point procedures 23g34.4.1 Create Component procedure . 23g34.4.2 Delete Component procedure . 24g34.4.2a List Data procedure . 24g3ETSI ETSI TS 123 240 V13.0.0 (2016-01)43GPP TS 23.240 version 13.0.0 Release 134.4.3 Modify Data procedure . 25g34.4.4 Read Data proce

21、dure . 26g34.4.5 Subscribe To Data procedure 26g34.4.6 Unsubscribe To Data procedure 27g34.4.7 Notify Data procedure 28g34.4.8 Define Data procedure 28g34.4.9 Common information definitions 28g34.4.9.1 Requestor data . 28g34.4.10 Error handling and common error types . 29g35 GUP information model .

22、29g3Annex A (informative): Examples of 3GPP Generic User Profile usage . 32g3Annex B (informative): 3GPP Generic User Profile candidates 33g3Annex C (informative): Change history . 34g3History 35g3ETSI ETSI TS 123 240 V13.0.0 (2016-01)53GPP TS 23.240 version 13.0.0 Release 13Foreword This Technical

23、Specification has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the

24、TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is increment

25、ed for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. Introduction The fact of having several domains within the 3GPP mobile system (e.g. Circuit-Switched, Packet-S

26、witched, IP Multimedia Subsystem) and access technologies (e.g. GERAN, UTRAN and WLAN) introduces a wide distribution of data associated with the user. Further, the new functions both in terminals and networks mean that the data related to users, services and user equipment will be increased greatly

27、. This causes difficulties for users, subscribers, network operators and value added service providers to create, access and manage the user-related data located in different entities. The objective of specifying the 3GPP Generic User Profile is to provide a conceptual description to enable harmoniz

28、ed usage of the user-related information located in different entities. Technically the 3GPP Generic User Profile provides an architecture, data description and interface with mechanisms to handle the data. ETSI ETSI TS 123 240 V13.0.0 (2016-01)63GPP TS 23.240 version 13.0.0 Release 131 Scope The pr

29、esent document defines the stage 2 architecture description to the 3GPP Generic User Profile (GUP), which includes the elements necessary to realise the stage 1 requirements in TS 22.240 1. The present document includes the GUP reference architecture with descriptions of functional entities, and the

30、ir interfaces and procedures, as well as the high-level information model for the GUP data. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. - References are either specific (identified by date of publicatio

31、n, edition number, version number, etc.) or non-specific. - For a specific reference, subsequent revisions do not apply. - For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to

32、 the latest version of that document in the same Release as the present document. 1 3GPP TS 22.240: “Stage 1 Service Requirement for the 3GPP Generic User Profile (GUP)“. 2 Liberty Discovery Service Specification, http:/www.projectliberty.org/ 3 Liberty ID-WSF SOAP Binding Specification, http:/www.p

33、rojectliberty.org/ 4 Liberty ID-WSF Data Services Template, http:/www.projectliberty.org/ 5 Liberty ID-WSF Security and Privacy Overview, http:/www.projectliberty.org/ 6 Liberty ID-WSF Security Mechanisms, http:/www.projectliberty.org/ 3 Definitions, symbols and abbreviations 3.1 Definitions For the

34、 purposes of the present document the following definitions apply: 3GPP Generic User Profile (GUP): The 3GPP Generic User Profile is the collection of user related data which affects the way in which an individual user experiences services and which may be accessed in a standardized manner as descri

35、bed in this specification. GUP Component: A GUP component is logically an individual part of the Generic User Profile. Data Element: the indivisible unit of Generic User Profile information. Data Element Group: A pre-defined set of Data Elements and/or other Data Element Groups closely related to ea

36、ch other. One or more Data Element Groups can constitute the GUP Component. Data Description Method: A method describing how to define the data contained in the Generic User Profile. ETSI ETSI TS 123 240 V13.0.0 (2016-01)73GPP TS 23.240 version 13.0.0 Release 133.2 Symbols For the purposes of the pr

37、esent document the following symbols apply: Rg Reference Point between Applications and the GUP Server. Rp Reference Point between the GUP Server and GUP Data Repositories, and between Applications and GUP Data Repositories. 3.3 Abbreviations For the purposes of the present document the following ab

38、breviations apply: FFS For Further Study GUP 3GPP Generic User Profile HPLMN Home PLMN LCS Location servicesOSA Open Service Access PLMN Public Land Mobile Network RAF Repository Access Function UE User EquipmentXML eXtensible Markup Language 4 Reference Architecture 4.1 GUP Functionalities 4.1.1 Ha

39、rmonized access interface The GUP harmonized access interface is the interface which can be used by the GUP suppliers and GUP consumers to access, manage and transfer the profile data. This application layer interface is independent of the profile structure. 4.1.2 Single point of access There exists

40、 for each Profile a single point of access, which knows the location of the various components of the Profile. A discovery service, e.g. Liberty Discovery Service Specification 2 may be used to get the contact reference information for this access point if not known by other means. 4.1.3 Authenticat

41、ion of profile access A GUP functionality exists that is responsible to authenticate applications. Authentication is a vital function to be passed before any kind of access to GUP data is granted. GUP shall adopt generic mechanisms such as used for the OSA framework approach. More specifically GUP s

42、hall use authentication mechanisms from Liberty Alliance Project as specified in Liberty ID-WSF Security and Privacy Overview 5, Liberty Discovery Service 2 and Liberty ID-WSF Security Mechanisms 6. 4.1.4 Authorization of profile access A GUP functionality exists that is responsible to authorise app

43、lications to access GUP data based on User specific or common privacy rules. All attempts to access the GUP data are to be authorized according to the defined policies which shall include the requestor information, the requested data, the target subscriber and the performed operation, or some of tho

44、se. GUP shall use authorization mechanisms from Liberty Alliance Project as specified in Liberty ID-WSF Security and Privacy Overview 5 and Liberty ID-WSF Security Mechanisms 6. ETSI ETSI TS 123 240 V13.0.0 (2016-01)83GPP TS 23.240 version 13.0.0 Release 13The GUP data structures need to satisfy the

45、 requirement to provide the authorization information on the different levels: profile, component or data element. In addition to the generic authorization data, additional service specific data may be defined (e.g. for LCS). The same applies for the authorization decision logic. The execution of th

46、e authorization logic leads to a decision whether a requestor is allowed to make the request at all, and additionally to which part of data the requestor has the appropriate access rights with regard to the nature of the request. GUP provides mechanisms for the different GUP entities for managing th

47、e authorization data. Both HPLMN based applications and non-HPLMN based applications are expected to send requests to the GUP Server. The GUP server shall have functionality to apply different authorization criteria, policy control and load control to HPLMN and non-HPLMN applications. Policy control

48、 and load control are out of the scope of the present document. 4.1.5 Privacy control The tight connection of authentication, authorization and subscriber specific privacy requirements results in privacy control. Privacy control implies a centralized management for access rights including the subscr

49、ibers privacy requirements. GUP shall use privacy control mechanisms and other privacy related features from Liberty Alliance Project as specified in Liberty ID-WSF Security and Privacy Overview 5 and Liberty ID-WSF Security Mechanisms 6. 4.1.6 Synchronization of data storage The GUP data repository holds the master copy of the GUP component data. Applications or GUP server may copy (i.e. read) the component data or request synchronization. The present document defines how the data is requested and sent. What is thereafter done with the dat