ETSI TS 124 022-2018 Digital cellular telecommunications system (Phase 2+) (GSM) Universal Mobile Telecommunications System (UMTS) Radio Link Protocol (RLP) for circuit switched be .pdf

1、 ETSI TS 124 022 V15.0.0 (2018-07) Digital cellular telecommunications system (Phase 2+) (GSM); Universal Mobile Telecommunications System (UMTS); Radio Link Protocol (RLP) for circuit switched bearer and teleservices (3GPP TS 24.022 version 15.0.0 Release 15) TECHNICAL SPECIFICATION GLOBAL SYSTEM F

2、OR MOBILE COMMUNICATIONSRETSI ETSI TS 124 022 V15.0.0 (2018-07)13GPP TS 24.022 version 15.0.0 Release 15Reference RTS/TSGC-0324022vf00 Keywords GSM,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF

3、742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic

4、and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) vers

5、ion kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableSt

6、atus.aspx If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photo

7、copying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. ETSI 2018. All rights reserved. DECTTM, PLUGTESTS

8、TM, UMTSTMand the ETSI logo are trademarks of ETSI registered for the benefit of its Members. 3GPPTM and LTETMare trademarks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members. GSMand the GSM logo are tra

9、demarks registered and owned by the GSM Association. ETSI ETSI TS 124 022 V15.0.0 (2018-07)23GPP TS 24.022 version 15.0.0 Release 15Intellectual Property Rights Essential patents IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information pertain

10、ing to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretari

11、at. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on th

12、e ETSI Web server) which are, or may be, or may become, essential to the present document. Trademarks The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners. ETSI claims no ownership of these except for any which are indicated as being the

13、property of ETSI, and conveys no right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks. Foreword This Technical Specification (TS

14、) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cro

15、ss reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as descri

16、bed in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 124 022 V15.0.0 (2018-07)33GPP TS 24.022 version 15.0.0 Release 15Contents Intellectual Property

17、Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 5g31 Scope 6g32 References 6g32.1 Definitions and abbreviations . 7g32.1.1 Abbreviations 7g32.1.2 Definitions 8g33 Introduction 9g34 Frame structure . 10g34.1 Basic frame structure 10g34.2 RLP header . 10g34.3 Order of transmission . 10g3

18、4.4 Frame check sequence 10g35 Elements and procedure . 11g35.1 Modes . 11g35.1.1 Asynchronous Balanced Mode (ABM). 11g35.1.2 Asynchronous Disconnected Mode (ADM) . 11g35.2 Header and parameters . 11g35.2.1 Generally used bits 12g35.2.1.1 Command/response bit, C/R . 12g35.2.1.2 Poll/Final bit, P/F 1

19、2g35.2.2 Unnumbered frames, U . 12g35.2.2.1 Set asynchronous balanced mode SABM (11100) 12g35.2.2.2 Unnumbered Acknowledge. UA (00110) . 13g35.2.2.3 Disconnect, DISC (00010) 13g35.2.2.4 Disconnected Mode, DM (11000) . 13g35.2.2.5 Unnumbered Information, UI (00000) 13g35.2.2.6 Exchange Identification

20、, XID (11101) 13g35.2.2.7 Test, TEST (00111) . 14g35.2.2.8 Null information, NULL (11110) 14g35.2.2.9 REMAP (10001) . 15g35.2.3 Supervisory frames, S, and numbered information transfer and supervisory frames combined, I+S . 15g35.2.3.1 Numbering 15g35.2.3.2 Send Sequence number, N(S) 16g35.2.3.3 Rec

21、eive sequence number, N(R) . 16g35.2.3.4 L2R Status bit 16g35.2.3.5 Receive ready, RR (00) . 16g35.2.3.6 Reject, REJ (01) 16g35.2.3.7 Receive not ready, RNR (10) 16g35.2.3.8 Selective reject, SREJ (11) 16g35.2.3.9 Upgrading Proposal bit, UP bit . 17g35.3 Error Recovery . 17g35.3.1 Improper frames 17

22、g35.3.2 N(S) sequence error 17g35.3.3 N(R) error . 17g35.3.4 Time-out and checkpointing . 18g35.3.4.1 Treatment of errors during link establishment, link reset and link disconnect 18g35.3.4.2 Treatment of errors during numbered information transfer . 18g35.3.5 Contentious situations . 18g35.4 Transi

23、tions between 240 bit and 576 bit frame lengths 18g35.5 List of system parameters . 19g35.5.1 RLP Version N 20g3ETSI ETSI TS 124 022 V15.0.0 (2018-07)43GPP TS 24.022 version 15.0.0 Release 155.5.2 Maximum number of outstanding I frames k (Window size) . 20g35.5.3 Timer T1. 21g35.5.4 Maximum number o

24、f retransmissions N2 . 21g35.5.5 Data Compression Parameters 21g35.5.6 Re-sequencing period (Timer T4) . 21g35.5.7 Optional features . 21g35.6 Support for discontinuous transmission (DTX) 22g35.6.1 In case of A/Gb mode . 22g35.6.2 In case of Iu mode . 22g36 Service definitions 22g36.1 Introduction 2

25、2g36.2 Conventions 23g36.3 Queue model 23g36.4 List of Primitives 24g36.5 Possible RLP time sequence diagrams . 26g3Annex A (informative): RLP SDL Diagrams . 29g3A.1 List of RLP entity states . 29g3A.1.1 (main) states . 29g3A.1.2 state variables . 30g3A.2 List of RLP entity events 32g3Annex B (infor

26、mative): Change history . 64g3History 65g3ETSI ETSI TS 124 022 V15.0.0 (2018-07)53GPP TS 24.022 version 15.0.0 Release 15Foreword This Technical Specification (TS) has been produced by the 3rdGeneration Partnership Project (3GPP). The present document specifies the Radio Link Protocol (RLP) for circ

27、uit switched data transmission within the 3GPP system. The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying ch

28、ange of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of subs

29、tance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TS 124 022 V15.0.0 (2018-07)63GPP TS 24.022 version 15.0.0 Release 151 Scope The present document specifies the Radio Link Pro

30、tocol (RLP) for circuit switched data transmission within a PLMN. RLP covers the Layer 2 functionality of the ISO OSI Reference Model (ISO/IEC 7498 22). It is based on ideas contained in ISO/IEC 3309 21, ISO/IEC 4335 20 and ISO/IEC 7809 26 (HDLC of ISO) as well as ITU-T Recommendation X.25 30 and Q.

31、92x (LAP-B and LAP-D of ITU, respectively.) RLP has been tailored to the special needs of digital radio transmission. RLP provides to its users the OSI Data Link Service (ISO/IEC 8886 24). RLP is intended for use with non-transparent data-transfer. Protocol conversion may be provided for a variety o

32、f protocol configurations. Those foreseen immediately are: - character-mode protocols using start-stop transmission (IA5); - X.25 LAP-B. For reasons of better presentation, material about protocol conversion has been placed within those Specifications concerned with the relevant Terminal Adapters, i

33、.e. 3GPP TS 27.002 10 for the asynchronous case and 3GPP TS 27.003 11 for the synchronous case. Care must be taken that that material also applies to Interworking Functions; see 3GPP TS 29.007 13. The present document is valid for a PLMN in A/Gb mode as well as in Iu mode. If text applies only for o

34、ne of these systems it is explicitly mentioned by using the terms “A/Gb mode“ and “Iu mode“. Please note, that the Gb interface does not play any role in the scope of the present document although the term “A/Gb mode“ is used. 2 References The following documents contain provisions which, through re

35、ference in this text, constitute provisions of the present document. - References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. - For a specific reference, subsequent revisions do not apply. - For a non-specific reference, the latest v

36、ersion applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 Void. 2 3GPP TS 44.021: “Rate adaption on the Mobile Station - Base Station Syste

37、m (MS - BSS) interface“. 3 3GPP TS 48.004: “Base Station System - Mobile services Switching Centre (BSS - MSC) interface Layer 1 specification“. 4 3GPP TS 48.020: “Rate adaption on the Base Station System - Mobile services Switching Centre (BSS - MSC) interface“. 5 3GPP TS 25.410: “UTRAN Iu interfac

38、e: General Aspects and Principles“. 6 3GPP TS 25.411: “UTRAN Iu interface Layer 1“. 7 3GPP TS 25.414: “UTRAN Iu interface data transport and transport signalling“. 8 3GPP TS 25.415: “UTRAN Iu interface user plane protocols“. 9 3GPP TS 27.001: “General on Terminal Adaptation Functions (TAF) for Mobil

39、e Stations (MS)“. 10 3GPP TS 27.002: “Terminal Adaptation Functions (TAF) for services using Asynchronous bearer capabilities“. 11 3GPP TS 27.003: “Terminal Adaptation Functions (TAF) for services using Synchronous bearer capabilities“. ETSI ETSI TS 124 022 V15.0.0 (2018-07)73GPP TS 24.022 version 1

40、5.0.0 Release 1512 Void. 13 3GPP TS 29.007: “General requirements on interworking between the Public Land Mobile Network (PLMN) and the Integrated Services Digital Network (ISDN) or Public Switched Telephone Network (PSTN)“. 14 ITU-T Recommendation Q.920: “ISDN user-network interface data link layer

41、 - General aspects“. 15 ITU-T Recommendation Q.921: “ISDN user-network interface - Data link layer specification“. 16 ITU-T Recommendation Q.921bis: “Abstract test suite for LAPD conformance testing“. 17 ITU-T Recommendation Q.922: “ISDN data link layer specification for frame mode bearer services“.

42、 18 ITU-T Recommendation V.42bis: “Data compression procedures for Data Circuit-terminating Equipment (DCE) using error correction procedures“. 19 ITU-T Recommendation X.25: “Interface between Data Terminal Equipment (DTE) and Data Circuit-terminating Equipment (DCE) for terminals operating in packe

43、t mode and connected to public data networks by dedicated Circuit“. 20 ISO/IEC 4335: “Information technology - Telecommunications and information exchange between systems - High-level Data Link Control (HDLC) procedures - Elements of procedures“. 21 ISO/IEC 3309: “Information technology - Telecommun

44、ications and information exchange between systems - High-level Data Link Control (HDLC) procedures - Frame structure“. 22 ISO/IEC 7498: “Information technology - Open Systems Interconnection - Basic Reference Model“. 23 ISO/IEC 8885: “Information technology - Telecommunication and information exchan

45、ge between systems - High-level Data Link Control (HDLC) procedures - General purpose XID frame information field content and format“. 24 ISO/IEC 8886: “Information technology - Open Systems Interconnection - Data link service definition“. 25 ISO/TR 8509: “Information processing systems - Open Syste

46、ms Interconnection - Service conventions“. 26 ISO/IEC 7809: “Information technology - Telecommunications and information exchange between systems - High-level Data Link Control (HDLC) procedures - Classes of procedures“. 27 ISO/IEC 7776: “Information technology - Telecommunications and information e

47、xchange between systems - High-level data link control procedures - Description of the X.25 LAPB-compatible DTE data link procedures“. 28 3GPP TR 21.905: “Vocabulary for 3GPP Specifications“. 29 3GPP TS 43.051: “GSM/EDGE Radio Access Network (GERAN) overall description; Stage 2“. 30 ITU-T Recommenda

48、tion X.25: “Interface between Data Terminal Equipment (DTE) and Data Circuit-terminating Equipment (DCE) for terminals operating in the packet mode and connected to public data networks by dedicated circuit“. 2.1 Definitions and abbreviations 2.1.1 Abbreviations For the purposes of the present docum

49、ent, the abbreviations given in 3GPP TR 21.905 28 and the following apply: ABM Asynchronous Balanced Mode ADM Asynchronous Disconnected Mode ATM Asynchronous Transfer Mode. ETSI ETSI TS 124 022 V15.0.0 (2018-07)83GPP TS 24.022 version 15.0.0 Release 15C/R Command/Response bit DISC Disconnect frame DM Disconnected Mode frame DTX Discontinuous Transmission FCS Frame Check Sequence L2R Layer 2 Relay function N(R) Receive sequence numberN(S) Send sequence number NULL Null information frame P/F Poll/Fi