ETSI TS 124 083-2016 Digital cellular telecommunications system (Phase 2+) Universal Mobile Telecommunications System (UMTS) Call Waiting (CW) and Call Hold (HOLD) supplementary se.pdf

1、 ETSI TS 1Digital cellular telecoUniversal Mobile TelCall Waiting supp(3GPP TS 24.0TECHNICAL SPECIFICATION124 083 V13.0.0 (2016communications system (Phaelecommunications System (g (CW) and Call Hold (HOLD)p lementary services; Stage 3 .083 version 13.0.0 Release 13GLOBAL SYSTEMOBILE COMMUN16-01) ha

2、se 2+); (UMTS); D) 13) TEM FOR ICATIONSRETSI ETSI TS 124 083 V13.0.0 (2016-01)13GPP TS 24.083 version 13.0.0 Release 13Reference RTS/TSGC-0424083vd00 Keywords GSM,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 5

3、62 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of

4、any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Fo

5、rmat (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/sta

6、tus/status.asp If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including

7、photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Instit

8、ute 2016. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Mark

9、s registered and owned by the GSM Association. ETSI ETSI TS 124 083 V13.0.0 (2016-01)23GPP TS 24.083 version 13.0.0 Release 13Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPR

10、s, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are ava

11、ilable on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which a

12、re, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM i

13、dentities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should

14、“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI

15、 ETSI TS 124 083 V13.0.0 (2016-01)33GPP TS 24.083 version 13.0.0 Release 13Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 4g30 Scope 5g30.1 References 5g30.2 Abbreviations . 6g31 Call Waiting (CW) . 6g31.1 Waiting call indication and confirmation . 6g31.

16、2 Normal operation with successful outcome 7g31.2.1 Waiting call accepted; existing call released 7g31.2.2 Waiting call accepted; existing call on hold . 7g31.2.3 Existing call released by user A; waiting call accepted 8g31.3 Normal operation with unsuccessful outcome 8g31.3.1 Waiting call released

17、by subscriber B . 8g31.3.2 Waiting call released by calling user C . 9g31.3.3 Waiting call times out . 9g31.3.4 No reply condition timer expires 9g31.4 Activation . 9g31.5 Deactivation . 10g31.6 Interrogation . 10g31.7 Invocation . 11g31.8 Registration and erasure . 11g32 Call Hold (HOLD) . 11g32.1

18、Normal operation 11g32.1.1 Hold and retrieve functions . 11g32.1.2 Hold invocation 12g32.1.3 Retrieve procedure 12g32.1.4 Alternate from one call to the other 13g32.1.5 Auxiliary states for hold and retrieve 14g32.1.6 An example of dimensioned state space . 15g32.2 Activation and deactivation 15g32.

19、3 Registration, erasure and interrogation . 15g3Annex A (informative): Change history . 16g3History 17g3ETSI ETSI TS 124 083 V13.0.0 (2016-01)43GPP TS 24.083 version 13.0.0 Release 13Foreword This Technical Specification has been produced by the 3GPP. This TS specifies the procedures used at the rad

20、io interface for normal operation, registration, erasure, activation, deactivation, invocation and interrogation of call completion supplementary services within the 3GPP system. The contents of the present document are subject to continuing work within the TSG and may change following formal TSG ap

21、proval. Should the TSG modify the contents of this TS, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version 3.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 Indicates T

22、SG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the specification; ETSI ETSI TS 124 083 V13.0.0 (2

23、016-01)53GPP TS 24.083 version 13.0.0 Release 130 Scope The present document specifies the procedures used at the radio interface (Reference point Um as defined in 3GPP TS 24.002) for normal operation, registration, erasure, activation, deactivation, invocation and interrogation of call completion s

24、upplementary services. Provision and withdrawal of supplementary services is an administrative matter between the mobile subscriber and the service provider and cause no signalling on the radio interface. In 3GPP TS 24.010 the general aspects of the specification of supplementary services at the lay

25、er 3 radio interface are given. 3GPP TS 24.080 specifies the formats and coding for the supplementary services. Definitions and descriptions of supplementary services are given in 3GPP TS 22.004 and 3GPP TS 22.08x and 3GPP TS 22.09x-series. 3GPP TS 22.083 is related specially to call completion supp

26、lementary services. Technical realization of supplementary services is described in 3GPP TS 23.011 and GSM 03.8x and GSM 03.9x-series. 3GPP TS 23.083 is related specially to call completion supplementary services. The procedures for Call Control, Mobility Management and Radio Resource management at

27、the layer 3 radio interface are defined in 3GPP TS 24.007 and 3GPP TS 24.008. The following supplementary services belong to the call completion supplementary services and are described in the present document: - Call waiting (CW) (clause 1); - Call hold (HOLD) (clause 2). 0.1 References The followi

28、ng documents contain provisions which, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. For a specific reference, subsequent revisions do not apply.

29、 For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP TR 21.905: “Vocabulary for 3GPP S

30、pecifications“. 2 3GPP TS 22.004: “General on supplementary services“. 3 3GPP TS 22.081: “Line identification supplementary services - Stage 1“. 4 3GPP TS 22.082: “Call Forwarding (CF) supplementary services - Stage 1“. 5 3GPP TS 22.083: “Call Waiting (CW) and Call Hold (HOLD) supplementary services

31、 - Stage 1“. 6 3GPP TS 22.084: “MultiParty (MPTY) supplementary services - Stage 1“. 7 3GPP TS 22.085: “Closed User Group (CUG) supplementary services - Stage 1“. 8 3GPP TS 22.086: “Advice of charge (AoC) supplementary services - Stage 1“. 9 3GPP TS 22.088: “Call Barring (CB) supplementary services

32、- Stage 1“. 10 3GPP TS 22.090: “Unstructured Supplementary Services Data (USSD) - Stage 1“. ETSI ETSI TS 124 083 V13.0.0 (2016-01)63GPP TS 24.083 version 13.0.0 Release 1311 3GPP TS 22.091: “ECT supplementary services operation - Stage 1“. 12 3GPP TS 23.011: “Technical realization of supplementary s

33、ervices“. 13 3GPP TS 23.081: “Line identification supplementary services - Stage 2“. 14 3GPP TS 23.082: “Call Forwarding (CF) supplementary services - Stage 2“. 15 3GPP TS 23.083: “Call Waiting (CW) and Call Hold (HOLD) supplementary services - Stage 2“. 16 3GPP TS 23.084: “MultiParty (MPTY) supplem

34、entary services - Stage 2“. 17 3GPP TS 23.085: “Closed User Group (CUG) supplementary services - Stage 2“. 18 3GPP TS 23.086: “Advice of Charge (AoC) supplementary services - Stage 2“. 19 3GPP TS 23.088: “Call Barring (CB) supplementary services - Stage 2“. 20 3GPP TS 23.090: “Unstructured supplemen

35、tary services operation - Stage 2“. 21 3GPP TS 23.091: “Explicit Call Transfer (ECT) supplementary service - Stage 2“. 22 3GPP TS 24.002: “GSM-UMTS Public Land Mobile Network (PLMN) Access Reference Configuration“. 23 3GPP TS 24.007: “Mobile radio interface signalling layer 3; General aspects“. 24 3

36、GPP TS 24.008: “Mobile radio interface layer 3 specification“. 25 3GPP TS 24.010: “Mobile radio interface layer 3; Supplementary services specification; General aspects“. 26 3GPP TS 24.080: “Mobile radio interface layer 3 supplementary services specification; Formats and coding“. 27 3GPP TS 24.082:

37、“Call Forwarding (CF) supplementary services - Stage 3“. 0.2 Abbreviations Abbreviations used in the present document are listed in 3GPP TR 21.905. 1 Call Waiting (CW) 1.1 Waiting call indication and confirmation When this service is activated for the controlling subscriber B and the B-subscriber ha

38、s calls only in states U10 (Active) or U26 (MO Modify) as defined in 3GPP TS 24.008, the arrival of an incoming call from subscriber C shall, if no other call is waiting be signalled to the mobile station B by a normal call indication. In that case the network and the mobile station shall act in acc

39、ordance with 3GPP TS 24.008. The transaction identifier shall be the transaction identifier (C-B) allocated to the waiting call and must not be the same as the transaction identifier (A-B) for the already existing call (see figure 1.1). In the CALL CONFIRMED message sent to the network the Cause inf

40、ormation element shall be included with cause #17 “user busy“ (see figure 1.1). When the ALERTING message is received by the network the call waiting timer T2 shall be started or if call forwarding on no reply is activated for the B-subscriber the no reply condition timer T3 shall be started. If the

41、 network received a non-zero SS Screening indicator from the calling users mobile station the ALERTING/FACILITY message sent to a calling mobile user shall include the Facility information element with an invoke of the Notification operation indicating that the call is waiting (see figure 1.2). If t

42、he network did not receive a non-zero SS Screening indicator from the calling users mobile station it shall not send a notification, i.e. either the ALERTING message does not include the Notification operation or the FACILITY message is omitted. ETSI ETSI TS 124 083 V13.0.0 (2016-01)73GPP TS 24.083

43、version 13.0.0 Release 13MS Network SETUP .Transaction identifier(C-B). .Cause #17 (user busy). ALERTING - .Transaction identifier(C-B). start T2/T3 NOTE: The SETUP message shall include a “Signal Information“ element with value #7 (call waiting tone on). This shall be used by the MS to generate an

44、appropriate call waiting indication. Figure 1.1: Call indication to the mobile station on arrival of an incoming call and call confirmation from the mobile station MS Network SETUP - CALL PROCEEDING .Transaction identifier(A-B). HOLD ACKNOWLEDGE .Transaction identifier(C-B). stop T2/T3 CONNECT ACKNO

45、WLEDGE Facility (Invoke = ActivateSS (CW, BasicServiceCode) RELEASE COMPLETE Facility (Invoke = DeactivateSS (CW, BasicServiceCode) RELEASE COMPLETE Facility (Invoke = InterrogateSS (CW) RELEASE COMPLETE HOLD ACKNOWLEDGE RETRIEVE ACKNOWLEDGE RETRIEVE (TI A-C) - HOLD ACKNOWLEDGE (TI A-B) New Version

46、Subject/Comment Apr 1999 GSM 04.83 6.0.0 Transferred to 3GPP CN1 CN#03 24.083 R99 3.0.0 Approved at CN#03 CN#11 24.083 3.0.0 Rel-4 4.0.0 Release 4 after CN#11 CN#16 24.083 4.0.0 Rel-4 4.0.1 References updated CN#16 24.083 4.0.1 Rel-5 5.0.0 Rel-5 created after CN#16 CN#26 24.083 6.0.0 Rel-6 6.0.0 Rel

47、-6 created after CN#26 CT#36 24.083 6.0.0 Rel-7 7.0.0 Upgraded unchanged from Rel-6 CT#42 24.083 7.0.0 Rel-8 8.0.0 Upgraded unchanged from Rel-7 2009-12 24.083 8.0.0 - Rel-9 9.0.0 Update to Rel-9 version (MCC) 2011-03 24.083 9.0.0 - Rel-10 10.0.0 Update to Rel-10 version (MCC) 2012-09 24.083 10.0.0

48、- Rel-11 11.0.0 Update to Rel-11 version (MCC) 2014-09 24.083 11.0.0 - Rel-12 12.0.0 Update to Rel-12 version (MCC) 2015-12 24.083 12.0.0 - 13.0.0 Update to Rel-13 version (MCC) ETSI ETSI TS 124 083 V13.0.0 (2016-01)173GPP TS 24.083 version 13.0.0 Release 13History Document history V13.0.0 January 2016 Publication