ETSI TS 124 087-2018 Digital cellular telecommunications system (Phase 2+) (GSM) Universal Mobile Telecommunications System (UMTS) User-to-User Signalling (UUS) Supplementary Servi_1.pdf

1、 ETSI TS 124 087 V15.0.0 (2018-07) Digital cellular telecommunications system (Phase 2+) (GSM); Universal Mobile Telecommunications System (UMTS); User-to-User Signalling (UUS) Supplementary Service; Stage 3 (3GPP TS 24.087 version 15.0.0 Release 15) TECHNICAL SPECIFICATION GLOBAL SYSTEM FOR MOBILE

2、COMMUNICATIONSRETSI ETSI TS 124 087 V15.0.0 (2018-07)13GPP TS 24.087 version 15.0.0 Release 15Reference RTS/TSGC-0424087vf00 Keywords GSM,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Asso

3、ciation but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or pri

4、nt versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept o

5、n a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx

6、If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying an

7、d microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. ETSI 2018. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTM

8、and the ETSI logo are trademarks of ETSI registered for the benefit of its Members. 3GPPTM and LTETMare trademarks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members. GSMand the GSM logo are trademarks re

9、gistered and owned by the GSM Association. ETSI ETSI TS 124 087 V15.0.0 (2018-07)23GPP TS 24.087 version 15.0.0 Release 15Intellectual Property Rights Essential patents IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information pertaining to the

10、se essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest

11、 updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web

12、 server) which are, or may be, or may become, essential to the present document. Trademarks The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners. ETSI claims no ownership of these except for any which are indicated as being the property o

13、f ETSI, and conveys no right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks. Foreword This Technical Specification (TS) has been

14、 produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross referen

15、ce between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in cla

16、use 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 124 087 V15.0.0 (2018-07)33GPP TS 24.087 version 15.0.0 Release 15Contents Intellectual Property Rights 2g3

17、Foreword . 2g3Modal verbs terminology 2g3Foreword . 4g31 Scope 5g32 References 5g33 Definitions and abbreviations . 5g33.1 Definitions 5g33.2 Abbreviations . 6g34 User-to-User Signalling (UUS); served mobile subscriber side . 6g34.1 UUS1 6g34.1.1 Operation when implicitly activated . 7g34.1.2 Operat

18、ion when explicitly activated . 7g34.1.2.1 UUS required 8g34.1.2.2 UUS not required 9g34.2 UUS2 9g34.2.1 Operation 10g34.2.1.1 UUS required 11g34.2.1.2 UUS not required 12g34.3 UUS3 12g34.3.1 Activation when originating a call 12g34.3.1.1 UUS required 14g34.3.1.2 UUS not required 14g34.3.2 Activatio

19、n during an active call 15g34.3.3 Invocation and operation 16g34.3.4 Flow Control . 16g34.4 Combination of UUS Services . 17g35 User-to-User Signalling (UUS); remote mobile subscriber side 18g35.1 UUS1 19g35.1.1 Operation when explicitly activated, UUS required . 19g35.1.2 Operation when explicitly

20、activated, UUS not required . 20g35.2 UUS2 21g35.2.1 Operation, UUS required 21g35.2.2 Operation, UUS not required 22g35.3 UUS3 23g35.3.1 Activation when originating a call 23g35.3.1.1 UUS required 23g35.3.1.2 UUS not required 23g35.3.2 Activation during an active call 24g36 Identification of parall

21、el transactions in UUS 24g3Annex A (normative): Cause values used in UUS supplementary service 25g3Annex B (informative): Change history . 26g3History 27g3ETSI ETSI TS 124 087 V15.0.0 (2018-07)43GPP TS 24.087 version 15.0.0 Release 15Foreword This Technical Specification has been produced by the 3GP

22、P. This TS gives the stage 3 description of the User-to-User signalling supplementary services within the 3GPP system. The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of this TS, it wi

23、ll be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version 3.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 Indicates TSG approved document under change control. y the second digi

24、t is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the specification; ETSI ETSI TS 124 087 V15.0.0 (2018-07)53GPP TS 24.087 version 15.0.0 Release 151 Scope This

25、 Technical Specification gives the stage 3 description of the User-to-User signalling supplementary services. The User-to-user supplementary service is divided into 3 different services: - Service 1 (UUS1) - Service 2 (UUS2) - Service 3 (UUS3) 2 References The following documents contain provisions

26、which, through reference in this text, constitute provisions of the present document. - References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. - For a specific reference, subsequent revisions do not apply. - For a non-specific refere

27、nce, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP TR 21.905: “Vocabulary for 3GPP Specifications“. 2 3GPP TS

28、23.087: “Digital cellular telecommunications system (Phase 2+); User-to-User Signalling (UUS); Stage 2“. 3 3GPP TS 24.008: “Digital cellular telecommunications system (Phase 2+); Mobile radio interface layer 3 specification “. 4 3GPP TS 24.080: “Digital cellular telecommunications system (Phase 2+);

29、 Mobile radio interface layer 3 supplementary services specification; Formats and coding“. 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the following definitions apply: Remote party: For service 1 and 2 the remote party is the called party of a call to wh

30、ich the served subscriber activates the UUS supplementary service. For service 3 the remote party can be either the called or the calling party of an established call to whom the use of the UUS supplementary service is requested by the served subscriber. Served subscriber: The subscriber who has a p

31、rovision of the UUS supplementary service and who activates the UUS supplementary service. For service 1 and 2 the served subscriber is always the calling subscriber, for service 3 either the calling or the called subscriber can be the served subscriber. User-to-User Information (UUI): The informati

32、on transferred by using the UUS supplementary service. UUS not required: If the “UUS not required“ indication is given by the subscriber, the call will be completed even if UUI cannot be passed to the called subscriber. UUS required: If the “UUS required“ indication is given by the subscriber, the c

33、all shall not be completed if UUI cannot be passed to the called subscriber. UUS Service: The UUS services (Service 1, 2 and 3) are components of the UUS supplementary service. If the UUS supplementary service is provided to a subscriber, he can handle the UUS services independently within a call. E

34、TSI ETSI TS 124 087 V15.0.0 (2018-07)63GPP TS 24.087 version 15.0.0 Release 153.2 Abbreviations For the purposes of the present document, the following abbreviations apply: MS A Mobile Station A, the mobile station of the served subscriber MS B Mobile Station B, the mobile station of the remote subs

35、criber UUI User-to-User Information UUS User-to-User SignallingUUS1 User-to-User Signalling Service 1 UUS2 User-to-User Signalling Service 2 UUS3 User-to-User Signalling Service 3 Further GSM related abbreviations are listed in 3GPP TR 21.905. 4 User-to-User Signalling (UUS); served mobile subscribe

36、r side 4.1 UUS1 For UUS1, both parties may exchange UUI during the set-up and the clearing phases of a call by including User-user information element(s) in basic call control messages (ALERTING, CONNECT, DISCONNECT, PROGRESS, RELEASE, RELEASE COMPLETE, SETUP). UUS1 can be activated implicitly or ex

37、plicitly. When UUS1 has been activated, either subscriber may include UUI when accepting, rejecting or terminating the call. UUS1 is automatically deactivated when the call is cleared. ETSI ETSI TS 124 087 V15.0.0 (2018-07)73GPP TS 24.087 version 15.0.0 Release 154.1.1 Operation when implicitly acti

38、vated To activate UUS1 implicitly, the MS A shall include a User-user information element in the SETUP message as part of a normal call request. See 3GPP TS 24.008. Implicitly activated UUS1 is active for the duration of the call; i.e. the remote party is not required to send a response to the impli

39、cit activation request. However, the remote party may include a User-user information element in the call response. The served subscriber or the remote party may terminate the call before a connection is established. MS A NETWORK SETUP - User-user . ALERTING User-user (Note 1), (Note 2) Figure 1: UU

40、S1 when implicitly activated NOTE 1: The User-user information element is optional. NOTE 2: Under normal conditions DISCONNECT message is used for clearing the call, but also RELEASE or RELEASE COMPLETE message may be used as the first call clearing message. 4.1.2 Operation when explicitly activated

41、 UUS1 is explicitly requested by the MS A when including a Facility information element with a UserUserService invoke component in the SETUP message. See 3GPP TS 24.008, 3GPP TS 24.080. The UserUserService invoke component shall indicate whether the service is “UUS required“ or “UUS not required“. I

42、f the remote party accepts the request, the network shall include a Facility information element with a UserUserService Return Result component in the ALERTING or the CONNECT message sent to the MS A. If the request is not accepted, the network shall include a Facility information element with a Use

43、rUserService Return Error component in the DISCONNECT message (when UUS required) or in the ALERTING or in the CONNECT message (when UUS not required) sent to the MS A. See errors in 3GPP TS 24.080. An explicit activation request may include UUI. The network may include User-user information element

44、 when accepting the activation request. The served subscriber or the remote party may terminate the call before a connection is established. For UUS1 explicit activation SS Version Indicator value 3 or above has to be used. ETSI ETSI TS 124 087 V15.0.0 (2018-07)83GPP TS 24.087 version 15.0.0 Release

45、 154.1.2.1 UUS required If the MS A gives the “UUS required“ indication, the call shall not be completed if UUI cannot be passed to the remote party. MS A NETWORK SETUP - Facility (Invoke=UserUserService (UUS1, UUS required), User-user (Note 1) . . ALERTING User-user (Note 1), (Note 5) Figure 2: Req

46、uest for explicit activation of UUS1, UUS required NOTE 1: The User-user information element is optional. NOTE 2: The Return Result component in the Facility information element shall be sent either in the ALERTING or in the CONNECT message. NOTE 3: If the remote party rejects the service request or

47、 does not respond with an explicit service 1 acceptance or rejection, DISCONNECT message is sent to the MS A with Facility information element including Return Error component with error value “rejectedByUser“. If the network rejects the request, the error value shall be “rejectedByNetwork“. See inf

48、ormation on Cause values in Annex A. NOTE 4: If the MS A does not receive an explicit service 1 acceptance or rejection in the ALERTING or the CONNECT message, the MS A shall clear the call. UUS1 is not activated. NOTE 5: Under normal conditions DISCONNECT message is used for clearing the call, but

49、also RELEASE or RELEASE COMPLETE message may be used as the first call clearing message. ETSI ETSI TS 124 087 V15.0.0 (2018-07)93GPP TS 24.087 version 15.0.0 Release 154.1.2.2 UUS not required If the MS A gives the “UUS not required“ indication, the call will be completed even if UUI cannot be passed to the remote pa