ETSI TS 124 093-2016 Digital cellular telecommunications system (Phase 2+) Universal Mobile Telecommunications System (UMTS) Completion of Calls to Busy Subscriber (CCBS) Stage 3 (.pdf

1、 ETSI TS 1Digital cellular telecoUniversal Mobile TelCompletion of Ca(3GPP TS 24.0TECHNICAL SPECIFICATION124 093 V13.0.0 (2016communications system (Phaelecommunications System (Calls to Busy Subscriber (CCBStage 3 .093 version 13.0.0 Release 13GLOBAL SYSTEMOBILE COMMUN16-01) hase 2+); (UMTS); CBS);

2、 13) TEM FOR ICATIONSRETSI ETSI TS 124 093 V13.0.0 (2016-01)13GPP TS 24.093 version 13.0.0 Release 13Reference RTS/TSGC-0424093vd00 Keywords GSM,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742

3、 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and

4、/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version

5、 kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If

6、you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and m

7、icrofilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2016. All righ

8、ts reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and o

9、wned by the GSM Association. ETSI ETSI TS 124 093 V13.0.0 (2016-01)23GPP TS 24.093 version 13.0.0 Release 13Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publ

10、icly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI

11、 Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or

12、may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These s

13、hould be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “

14、may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 124 093 V

15、13.0.0 (2016-01)33GPP TS 24.093 version 13.0.0 Release 13Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 4g31 Scope 5g32 References 5g33 Definitions and abbreviations . 6g33.1 Definitions 6g33.2 Abbreviations . 6g34 General . 7g34.1 Overview 7g34.2 Activa

16、tion . 7g34.3 CCBS Recall and CCBS Call Set-up 9g34.3.1 CCBS Call Set-up (MS A idle) . 9g34.3.2 CCBS Call Set-up (MS A not idle) . 11g34.3.2.1 Existing call released. 11g34.3.2.2 Existing call placed on hold 13g34.4 Deactivation . 15g34.5 Interrogation . 16g3Annex A (informative): Operation for non-

17、supporting MSs 18g3A.0 Scope 18g3A.1 MSs which do not support CCBS . 18g3A.1.1 Activation for non-supporting MSs 18g3A.2 CCBS Call Set-up for non-supporting MSs . 20g3A.3 Deactivation for non-supporting MSs 21g3A.4 Interrogation for non-supporting MSs 21g3Annex B (informative): Change history . 22g3

18、History 23g3ETSI ETSI TS 124 093 V13.0.0 (2016-01)43GPP TS 24.093 version 13.0.0 Release 13Foreword This Technical Specification has been produced by the 3GPP. This TS gives the stage 3 description of the Completion of Calls to Busy Subscriber (CCBS) supplementary service within the 3GPP system. The

19、 contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of this TS, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Vers

20、ion 3.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 Indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit i

21、s incremented when editorial only changes have been incorporated in the specification; ETSI ETSI TS 124 093 V13.0.0 (2016-01)53GPP TS 24.093 version 13.0.0 Release 131 Scope The present dcoument gives the stage 3 description of the Completion of Calls to Busy Subscriber (CCBS) supplementary service.

22、 The present document specifies the procedures used at the radio interface (Reference point Um as defined in 3GPP TS 24.002) for normal operation, activation, deactivation, invocation and interrogation of the completion of calls to busy subscriber supplementary services. Provision and withdrawal of

23、supplementary services is an administrative matter between the mobile subscriber and the service provider and cause no signalling on the radio interface. In 3GPP TS 24.010 the general aspects of the specification of supplementary services at the layer 3 radio interface are given. 3GPP TS 24.080 spec

24、ifies the formats and coding for the supplementary services. Definitions and descriptions of supplementary services are given in 3GPP TS 22.004, 3GPP TS 22.08x and 3GPP TS 22.09x-series. Technical specification 3GPP TS 22.093 is related specifically to the Completion of Calls to Busy Subscriber supp

25、lementary service. The technical realization of supplementary services is described in technical specifications 3GPP TS 23.011, 3GPP TS 23.08x and 3GPP TS 23.09x-series. 3GPP TS 23.093 is related specifically to Completion of Calls to Busy Subscriber supplementary service. The procedures for Call Co

26、ntrol, Mobility Management and Radio Resource management at the layer 3 radio interface are defined in 3GPP TS 24.007 and 3GPP TS 24.008. The following supplementary services belong to the call completion supplementary services and are described in the present document: - Completion of Calls to Busy

27、 Subscriber (CCBS) (see clause 4). 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. F

28、or a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the

29、 present document. 1 3GPP TR 21.905: “Vocabulary for 3GPP Specifications“. 2 3GPP TS 22.004: “General on supplementary services“. 3 3GPP TS 22.007: “Mobile Stations (MS) features“. 4 3GPP TS 22.030: “Man-Machine Interface (MMI) of the Mobile Station (MS)“. 5 3GPP TS 22.093: “Completion of Calls to B

30、usy Subscriber (CCBS) Service description, Stage 1“. 6 3GPP TS 23.011: “Technical realization of supplementary services“. 7 3GPP TS 23.093: “Technical realization of Completion of Calls to Busy Subscriber (CCBS)“. 8 3GPP TS 24.002: “GSM-UMTS Public Land Mobile Network (PLMN) access reference configu

31、ration“. 9 3GPP TS 24.007: “Mobile radio interface signalling layer 3 General aspects“. ETSI ETSI TS 124 093 V13.0.0 (2016-01)63GPP TS 24.093 version 13.0.0 Release 1310 3GPP TS 24.008: “Mobile radio interface layer 3 specification“. 11 3GPP TS 24.010: “Mobile radio interface layer 3 Supplementary s

32、ervices specification General aspects“. 12 3GPP TS 24.080: “Mobile radio interface layer 3 supplementary services specification Formats and coding“. 13 3GPP TS 24.083: “Call Waiting (CW) and Call Hold (HOLD) supplementary services - Stage 3“. 3 Definitions and abbreviations 3.1 Definitions For the p

33、urposes of the present document the following definitions apply. Subscriber A: The user of MS A, requesting CCBS. Destination B: The entity addressed in the original call set up, which is busy when first called by subscriber A. 3.2 Abbreviations For the purposes of the present document the following

34、 abbreviations apply: CCBS Completion of Calls to Busy Subscriber MS A Mobile Station of subscriber A NDUB Network Determined User Busy Further related abbreviations are given in 3GPP TR 21.905 ETSI ETSI TS 124 093 V13.0.0 (2016-01)73GPP TS 24.093 version 13.0.0 Release 134 General 4.1 Overview CCBS

35、 allows a calling subscriber A, encountering a Network Determined User Busy (NDUB) called destination B, to be notified when destination B is idle and to have the network reinitiate the call to destination B, if subscriber A desires. All of the radio signalling specific to CCBS is at the subscriber

36、A-side. Each procedure is described in turn. There is no radio signalling specific to CCBS at destination B-side. The radio signalling on the destination B-side uses basic call signalling procedures only. A mobile station that supports CCBS shall support the requirements of the following options use

37、d in 3GPP TS 24.008: 1) Prolonged Clearing Procedure; 2) Network Initiated Mobile Originated Connection Management (MO CM) Connection Request; 3) Network initiated MO call. A network supporting CCBS shall support the requirements of the following options used in 3GPP TS 24.008: 1) CCBS Request activ

38、ation; and 2) Network initiated MO call. 4.2 Activation When CCBS is allowed the network shall give subscriber A the option of activating a CCBS Request. The network shall send a DISCONNECT message to MS A (cause #17 (User Busy) or cause #34 (no circuit / channel available) with diagnostic field ind

39、icating CCBS is Possible and allowed actions indicating CCBS is Possible. The network starts the retention timer T1 when it sends the DISCONNECT message. The MS shall not release the connection with the network if allowed actions is present. If subscriber A attempts to activate a CCBS Request, MS A

40、shall send a RELEASE message, with the Facility information element indicating CCBSRequest and the network shall stop T1. If the subscriber A does not accept CCBS activation, the MS shall send normal RELEASE message and the network shall stop T1 and continue normal call clearing. If the timer T1 exp

41、ires before the RELEASE message is received from the MS, the network shall continue normal call clearing. If the network accepts the activation attempt, it shall acknowledge it by sending a RELEASE COMPLETE message containing the Facility information element with the CCBS index and optionally the Ad

42、dressOfB, SubAddressOfB and the BasicServiceCode. If the network rejects the activation attempt, it shall send a RELEASE COMPLETE message containing the Facility information element with a return error indication. If a TCH has been allocated for the initial call and there are no further need for thi

43、s channel configuration, the network may reconfigure the ongoing connection from TCH(s) mode to SDCCH only mode while waiting for further user input activity. It is a network option to maintain the ongoing connection in TCH mode while waiting for further user input activity. SS Version Indicator val

44、ue 3 or above has to be used. ETSI ETSI TS 124 093 V13.0.0 (2016-01)83GPP TS 24.093 version 13.0.0 Release 13MS A NETWORK SETUP (Note 1) - (Bearer capability, CC capabilities, Called party BCD number) DISCONNECT (Note 2) RELEASE COMPLETE RELEASE - Facility (Invoke = AccessRegisterCCEntry) RELEASE CO

45、MPLETE CM SERVICE PROMPT MM_STATUS - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - (Cause #32 (Service option not supported) / Cause #34 (Service option temporarily out of order) / Cause #97 (message type

46、 non-existent or not implemented) CC ESTABLISHMENT (BC“(s), (Note 1) RELEASE COMPLETE - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - (Cause #29 (facility rejected) / Cause #88 (incompatible destination

47、) / Cause #17 ( User Busy) (Note 2) RECALL (Cause #21 (call rejected) / Cause #17 (User Busy) / Cause #68 (ACM ACMmax) (Note 4) RELEASE COMPLETE (Note 6) Figure 4.3.1: CCBS Call Set-up for supporting MSs - subscriber A idle when RECALL arrives NOTE 1: The BC may be modified by the MS as long as the

48、same Basic Service Group is maintained. NOTE 2: The MS releases the transaction if the BC,HLC,LLC received in the CC ESTABLISHMENT message are incompatible with the MS, the MS cannot decode the contents of the “advanced recall alignment“ Facility information element correctly (see 3GPP TS 24.010) or the MS responds by indicating UDUB. NOTE 3: MS shall start CCBS Recall alerting on receiving the RECALL message. The CCBS timer T4 is started when the RECALL message is sent to the MS. Sub_Address information may be included. The Alerting Pattern parameter may be included by the