ETSI TS 124 135-2018 Universal Mobile Telecommunications System (UMTS) LTE Multicall supplementary service Stage 3 (V15 0 0 3GPP TS 24 135 version 15 0 0 Release 15).pdf

1、 ETSI TS 124 135 V15.0.0 (2018-07) Universal Mobile Telecommunications System (UMTS); LTE; Multicall supplementary service; Stage 3 (3GPP TS 24.135 version 15.0.0 Release 15) TECHNICAL SPECIFICATION ETSI ETSI TS 124 135 V15.0.0 (2018-07)13GPP TS 24.135 version 15.0.0 Release 15Reference RTS/TSGC-042

2、4135vf00 Keywords LTE,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document

3、 can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case o

4、f any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document

5、may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https:/portal

6、.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified

7、 without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. ETSI 2018. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are trademarks of ETSI registered for the benefit of its Members. 3GPPTM and LTETMare trademarks o

8、f ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members. GSMand the GSM logo are trademarks registered and owned by the GSM Association. ETSI ETSI TS 124 135 V15.0.0 (2018-07)23GPP TS 24.135 version 15.0.0 Rele

9、ase 15Intellectual Property Rights Essential patents IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 3

10、14: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigat

11、ion, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Trademarks The present document may

12、 include trademarks and/or tradenames which are asserted and/or registered by their owners. ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the

13、present document does not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specificati

14、ons or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal ver

15、bs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT al

16、lowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 124 135 V15.0.0 (2018-07)33GPP TS 24.135 version 15.0.0 Release 15Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 4g31 Scope 5g32 References 5g33 Definitions and abbreviations .

17、6g33.1 Abbreviations . 6g34 Multicall (MC) . 6g34.1 Normal operation 6g34.1.1 Mobile originating call (request a new traffic channel) 6g34.1.2 Mobile originating call (reuse an existing traffic channel) . 7g34.1.3 Mobile terminating call (request a new traffic channel) . 8g34.1.4 Mobile terminating

18、call (reuse an existing traffic channel) 10g34.1.5 Mobile terminating call (unsuccessful simultaneous Call in Setup case) . 11g34.2 Registration 11g34.2.1 Registration by the served mobile subscriber . 11g34.3 Interrogation . 12g3Annex A (informative): Change history . 13g3History 14g3ETSI ETSI TS 1

19、24 135 V15.0.0 (2018-07)43GPP TS 24.135 version 15.0.0 Release 15Foreword This Technical Specification (TS) has been produced by the 3rdGeneration Partnership Project (3GPP). The present document gives the stage 3 description of the Multicall (MC) supplementary service within the 3GPP system. The co

20、ntents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as fol

21、lows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc

22、. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TS 124 135 V15.0.0 (2018-07)53GPP TS 24.135 version 15.0.0 Release 151 Scope The present document gives the stage 3 description of the Multicall (MC) supplementary service. The present do

23、cument specifies the procedures used by the radio interface for normal operation, registration and interrogation of the Multicall supplementary service. Provision, withdrawal, erasure, activation and deactivation of supplementary services is an administrative matter between the mobile subscriber and

24、 the service provider and causes no signalling on the radio interface. 3GPP TS 24.010 describes the general aspects of the specification of supplementary services at the layer 3 radio interface. 3GPP TS 24.080 specifies the formats and coding for the supplementary services. Definitions and descripti

25、ons of supplementary services are given in 3GPP TS 22.004, 3GPP TS 22.072, 3GPP TS 22.08x, 3GPP TS 22.09x-series and 3GPP TS 22.135. 3GPP TS 22.135 is related specifically to the Multicall supplementary service. The technical realisation of supplementary services are described in 3GPP TS 23.011, 3GP

26、P TS 23.072, 3GPP TS 23.08x, 23.09x-series and 3GPP TS 23.135. 3GPP TS 23.135 is related specifically to the Multicall supplementary service. The procedures for Call Control and Mobility Management at the layer 3 radio interface are defined in 3GPP TS 24.007 and 3GPP TS 24.008. The following supplem

27、entary services are described in the present document: - Multicall (MC) (see clause 4). 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. - References are either specific (identified by date of publication, e

28、dition number, version number, etc.) or non-specific. - For a specific reference, subsequent revisions do not apply. - For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the

29、 latest version of that document in the same Release as the present document. 1 3GPP TR 21.905: “3GPP Vocabulary“. 2 3GPP TS 22.004: “General on supplementary services“. 3 3GPP TS 22.030: “Man-Machine Interface (MMI) of the Mobile Station (MS)“. 4 3GPP TS 22.135: “Multicall Stage1“. 5 3GPP TS 23.011

30、: “Technical realization of supplementary services“. 6 3GPP TS 23.135: “Multicall supplementary service stage 2“. 7 3GPP TS 24.007: “Mobile radio interface signalling layer 3 General aspects“. 8 3GPP TS 24.008: “Mobile radio interface layer 3 specification Core Network Protocol Stage 3“. 9 3GPP TS 2

31、4.010: “Mobile radio interface layer 3 Supplementary services specification General aspects“. 10 3GPP TS 24.080: “Mobile radio interface layer 3 Supplementary services specification Formats and coding“. ETSI ETSI TS 124 135 V15.0.0 (2018-07)63GPP TS 24.135 version 15.0.0 Release 1511 3GPP TS 24.083:

32、 “Call Waiting (CW) and Call Hold (HOLD) supplementary services - Stage 3“. 3 Definitions and abbreviations 3.1 Abbreviations For the purposes of the present document, the terms and definitions given in 3GPP TS 22.135 apply. Further related abbreviations are given in 3GPP TR 21.905. 4 Multicall (MC)

33、 4.1 Normal operation All of the radio signalling specific to Multicall is at the served mobile subscriber side. The radio signalling on the other side uses basic call signalling procedures only. The mobile subscriber supporting Multicall shall include the stream identifier (SI) information element.

34、 The purpose of the stream identifier (SI) information element is to associate a particular call with a Radio Access Bearer (RAB), and to identify whether a new traffic channel is requested for the call. Refer to TS 24.008 for the rules on allocating stream identifiers. 4.1.1 Mobile originating call

35、 (request a new traffic channel) If the served mobile subscriber initiates an outgoing call (A-B), the mobile subscriber shall include the stream identifier (SI) information element in the SETUP message. When there are no other ongoing calls, the following rules apply: - The stream identifier value

36、shall be equal to 1. - CC capabilities that indicate Nbr_UE shall be included in the SETUP message. - NW CC capabilities that indicate the network supports Multicall shall be included in the CALL PROCEEDING message. - If the NW CC capabilities is not sent from the network, the mobile station shall a

37、ssume that the network does not support Multicall, and shall not initiate an additional mobile originating call via a new bearer. - If the network receives the SETUP message with a stream identifier including an invalid content (SI value indicates other than 1 for the first call), the network shall

38、initiate call clearing with cause #95 “semantically incorrect message“. MS Network SETUP (TI(A-B), SI=1, CC capabilities) - CALL PROCEEDING (TI(A-B), NW CC capabilities) CALL PROCEEDING (TI(B-C) HOLD ACKNOWLEDGE (TI(A-B) CALL PROCEEDING (TI(B-C) ALERTING (TI(A-B) - DISCONNECT (TI(A-B), Cause #95) AL

39、ERTING (TI(B-C) - CONNECT (TI(B-C) - DISCONNECT (TI(B-C), Cause #44) ALERTING (TI(B-C) - CONNECT (TI(B-C), SI(B-C) - DISCONNECT (TI(B-C), Cause #44) HOLD (TI(A-B) - HOLD ACKNOWLEDGE (TI(A-B) DISCONNECT (TI(B-C), Cause #44) ALERTING (TI(A-B) - SETUP (TI(B-C) Figure 8: The mobile terminating call in t

40、he unsuccessful case of simultaneous Call in Setup 4.2 Registration The following information has to be registered in the network: - The maximum number of bearers chosen by the user, Nbr_User. 4.2.1 Registration by the served mobile subscriber A Multicall registration request from a mobile user shal

41、l include the SS-Code of Multicall. The request applies to all basic services. If the registration is successful, the Multicall service will be registered. The network will then send a return result indicating acceptance of the request including the value of Nbr_User. If the MS does not send an SS V

42、ersion Indicator in the invocation request then the network shall send an SS-Status in the result. If the MS does send an SS Version Indicator in the invocation request then the inclusion of SS-Status in the result is optional. If the SS-Status is included the network shall set it to reflect the sta

43、te of the service. The MS shall ignore the contents of the SS-Status parameter if one is received. See figure 9. If the system cannot accept a registration request, a corresponding error indication is returned to the served mobile subscriber that Multicall registration was not successful. Error valu

44、es are specified in 3GPP TS 24.080. ETSI ETSI TS 124 135 V15.0.0 (2018-07)123GPP TS 24.135 version 15.0.0 Release 15MS Network REGISTER - Facility (Invoke = RegisterSS (Multicall, Nbr_User) RELEASE COMPLETE Facility (Invoke = InterrogateSS (Multicall) RELEASE COMPLETE New Version Subject/Comment CN#

45、07 24.135 1.0.0 R99 3.0.0 Approved in TSGN#07 CN#08 24.135 3.0.0 001r2 R99 3.1.0 Clarifications of the Multicall procedures CN#11 24.135 3.1.0 Rel-4 4.0.0 Approved at CN#11 CN#14 24.135 4.0.0 003r1 Rel-4 4.1.0 Clarification on SI value for Mobile terminating call (reuse an existing traffic channel)

46、CN#16 24.135 4.1.0 Rel-4 4.1.1 References updated CN#16 24.135 4.1.1 Rel-5 5.0.0 Rel-5 created after CN#16 CN#26 24.135 5.0.0 Rel-6 6.0.0 Rel-6 created after CN#26 CT#36 24.135 6.0.0 Rel-7 7.0.0 Upgraded unchanged from Rel-6 CT#42 24.135 7.0.0 Rel-8 8.0.0 Upgraded unchanged from Rel-7 2009-12 24.135 8.0.0 - Rel-9 9.0.0 Update to Rel-9 version (MCC) 2011-03 24.135 9.0.0 - Rel-10 10.0.0