ETSI TS 124 183-2018 Universal Mobile Telecommunications System (UMTS) LTE IP Multimedia Subsystem (IMS) Customized Ringing Signal (CRS) Protocol specification (V15 0 0 3GPP TS 24 .pdf

1、 ETSI TS 124 183 V15.0.0 (2018-06) Universal Mobile Telecommunications System (UMTS); LTE; IP Multimedia Subsystem (IMS) Customized Ringing Signal (CRS); Protocol specification (3GPP TS 24.183 version 15.0.0 Release 15) TECHNICAL SPECIFICATION ETSI ETSI TS 124 183 V15.0.0 (2018-06)13GPP TS 24.183 ve

2、rsion 15.0.0 Release 15Reference RTS/TSGC-0124183vf00 Keywords LTE,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N

3、7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the p

4、rior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the presen

5、t document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to

6、 one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The con

7、tent of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. ETSI 2018. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are trademarks of ETSI registered for the benefit of

8、its Members. 3GPPTM and LTETMare trademarks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members. GSMand the GSM logo are trademarks registered and owned by the GSM Association. ETSI ETSI TS 124 183 V15.0.0

9、 (2018-06)23GPP TS 24.183 version 15.0.0 Release 15Intellectual Property Rights Essential patents IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and n

10、on-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). P

11、ursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present

12、document. Trademarks The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners. ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no right to use or reproduce any trademark and/or t

13、radename. Mention of those trademarks in the present document does not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The presen

14、t document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:

15、/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of

16、provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 124 183 V15.0.0 (2018-06)33GPP TS 24.183 version 15.0.0 Release 15Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 5g31 Scope 6g32 Ref

17、erences 6g33 Definitions and abbreviations . 6g33.1 Definitions 6g33.2 Abbreviations . 7g34 Customized Ringing Signal (CRS) . 7g34.1 Introduction 7g34.2 Description . 7g34.2.1 General description . 7g34.3 Operational requirements . 7g34.3.1 Provision/withdrawal 7g34.3.1.1 CRS provision/withdrawal 7g

18、34.3.1.2 Requirements on the originating network side 7g34.3.1.3 Requirements on the terminating network side . 7g34.4 Syntax requirements . 8g34.5 Signalling procedures . 8g34.5.1 General 8g34.5.2 Activation/deactivation . 8g34.5.3 Registration/erasure 8g34.5.4 Interrogation . 8g34.5.5 Invocation a

19、nd operation 8g34.5.5.1 Actions at the originating UE 8g34.5.5.2 Actions at the terminating UE . 8g34.5.5.2.1 General 8g34.5.5.2.2 UE Actions for download and play model 9g34.5.5.2.2.1 General. 9g34.5.5.2.2.2 UE Actions for CRS copy 9g34.5.5.2.2.3 UE Actions for CRS stop . 9g34.5.5.2.3 UE Actions fo

20、r early session model 9g34.5.5.2.3.1 General. 9g34.5.5.2.3.2 UE Actions for CRS copy 9g34.5.5.2.4 UE support of DTMF 10g34.5.5.2.3.2 UE Actions for CRS stop . 10g34.5.5.3 Actions at the AS serving the originating UE . 10g34.5.5.3.1 General 10g34.5.5.3.2 AS Actions for early session model . 10g34.5.5

21、.3.2.1 General AS actions 10g34.5.5.3.2.2 AS Actions for CRS stop . 11g34.5.5.3.3 AS Actions for download and play model . 12g34.5.5.3.4 AS Actions for CRS copy 12g34.5.5.3.5 AS support of DTMF . 12g34.5.5.4 Actions at the AS serving the terminating UE 12g34.5.5.4.1 AS Actions for CRS stop . 12g34.5

22、.5.4.2 AS Actions for early session model . 12g34.5.5.4.3 AS support of DTMF . 14g34.5.5.4.4 AS Actions for download and play model . 15g34.6 Interaction with other services 15g34.6.1 Communication session Hold (HOLD). 15g34.6.2 Termination Identification Presentation (TIP) 15g34.6.3 Termination Ide

23、ntification Restriction (TIR) 15g3ETSI ETSI TS 124 183 V15.0.0 (2018-06)43GPP TS 24.183 version 15.0.0 Release 154.6.4 Originating Identification presentation (OIP) . 15g34.6.5 Originating Identification Restriction (OIR) . 15g34.6.6 Conference (CONF) 15g34.6.7 Communication Diversion (CDIV) . 15g34

24、.6.7.1 General 15g34.6.7.2 CFNR 16g34.6.8 Message Waiting Indication (MWI) . 16g34.6.9 Communication Barring (CB). 16g34.6.10 Communication Waiting (CW) . 16g34.6.11 Explicit Communication Transfer (ECT) . 16g34.6.12 Completion of Communications to Busy Subscriber (CCBS) 17g34.7 Service configuratio

25、n . 17g3Annex A (informative): Signalling flows 18g3A.1 CRS down and play model signalling flows 18g3A.1.1 Introduction 18g3A.1.2 CRS when UE#1 and UE#2 have resources available 19g3A.2 CRS signalling flows using early session model 23g3A.2.1 Introduction 23g3A.2.2 CRS when UE#1 and UE#2 have resour

26、ces available 23g3A.2.3 CRS when UE#1 does not have required resources available while UE#2 has resources available 28g3A.2.4 CRS when UE#1 has required resources available while UE#2 do not have resources available 38g3A.2.5 Continue to play CRS during the conversation 44g3Annex B (informative): Vo

27、id . 53g3Annex C (normative): Registration for URN used within the current document 54g3Annex D (informative): XML body in SIP message for indicating to UE . 55g3D.1 CRS service indication XML schema 55g3D.1.1 General . 55g3D.1.2 XML schema 55g3D.1.3 IANA registration template 55g3Annex E (normative

28、): SDP a=content attribute “g.3gpp.crs“ value . 57g3E.1 Introduction 57g3E.2 IANA registration . 57g3Annex F(informative): Change history . 58g3History 61g3ETSI ETSI TS 124 183 V15.0.0 (2018-06)53GPP TS 24.183 version 15.0.0 Release 15Foreword This Technical Specification has been produced by the 3r

29、dGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release

30、 date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. tec

31、hnical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TS 124 183 V15.0.0 (2018-06)63GPP TS 24.183 version 15.0.0 Release 151 Scope The present document provides the protocol details for the Custo

32、mized Ringing Signal (CRS) service in the IP Multimedia (IM) Core Network (CN) subsystem based on the requirements from 3GPP TS 22.183 2. The CRS service is an operator specific service by which an operator enables the subscriber to customize the media which is played to the called party as an incom

33、ing communication indication during establishment of a communication The present document is applicable to User Equipment (UE) and Application Servers (AS) which are intended to support the CRS service. 2 References The following documents contain provisions which, through reference in this text, co

34、nstitute provisions of the present document. - References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. - For a specific reference, subsequent revisions do not apply. - For a non-specific reference, the latest version applies. In the c

35、ase of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP TR 21.905: “Vocabulary for 3GPP Specifications“. 2 3GPP TS 22.183: “Customized Ringing Signal (CRS)

36、Requirements; Stage 1“. 3 3GPP TS 24.229: “IP multimedia call control protocol based on Session Initiation Protocol (SIP) and Session Description Protocol (SDP); Stage 3“. 4 RFC 3959: “The Early Session Disposition Type for the Session Initiation Protocol (SIP)“. 5 3GPP TS 24.623: “Extensible Markup

37、 Language (XML) Configuration Access Protocol (XCAP) over the Ut interface for Manipulating Supplementary Services“. 6 3GPP TS 24.238: “Session Initiation Protocol (SIP) based user configuration; Stage 3“. 7 RFC 6086 (January 2011): “Session Initiation Protocol (SIP) INFO Method and Package Framewor

38、k“. 8 RFC 7462 (March 2015): “URNs for the Alert-Info Header Field of the Session Initiation Protocol (SIP)“. 9 RFC 4796: “The Session Description Protocol (SDP) Content Attribute“. 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions gi

39、ven in 3GPP TR 21.905 1 and the following apply. A term defined in the present document takes precedence over the definition of the same term, if any, in 3GPP TR 21.905 1. Media component: A media component, described by the SDP, is a separate data-flow related to a media type which is sent by using

40、 an IP based transport protocol (e.g. RTP). Multiple media components may be used in the same session to send multiple media types. ETSI ETSI TS 124 183 V15.0.0 (2018-06)73GPP TS 24.183 version 15.0.0 Release 153.2 Abbreviations For the purposes of the present document, the abbreviations given in 3G

41、PP TR 21.905 1 and the following apply. An abbreviation defined in the present document takes precedence over the definition of the same abbreviation, if any, in 3GPP TR 21.905 1. CRS Customized Ringing Signal 4 Customized Ringing Signal (CRS) 4.1 Introduction The CRS service is an operator specific

42、 service by which an operator enables the subscriber to customize the media which is played to the called party during alerting of the called party. The media can consist of music, voice, text, video or other customized ringing signals. 4.2 Description 4.2.1 General description The service user is a

43、ble to subscribe to the CRS service, activate (or de-activate) the service, and update the settings, e.g., to change by configuration the active CRS media. The media can consist of favourable songs, multimedia clips or other customized ring signals. The CRS subscriber is able to refine the CRS media

44、 selection behaviour with configured rules, e.g. time, calling partys location, called partys location, the identity of the calling and called party. The CRS service is able to select the appropriate CRS media according to the rules. CRS is an originating network service, but can also have a termina

45、ting network functional component. That is, CRS media can be selected on behalf of the calling subscriber, but the called (IMS) subscriber can also subscribe to and activate the CRS service. Whether or not the called partys CRS media has precedence over the calling partys selected CRS media is a mat

46、ter of configuration in the called partys (terminating) network. The presentation of the selected CRS media to the called party starts some time following the initiation of a session, but prior to session answer. When the called party answers, the CRS media either stops or continues during the conve

47、rsation, depending on operator or user preferences. 4.3 Operational requirements 4.3.1 Provision/withdrawal 4.3.1.1 CRS provision/withdrawal The CRS service may be provided after prior arrangement with the service provider. The CRS service may be withdrawn at the subscribers request or for administr

48、ative reasons. 4.3.1.2 Requirements on the originating network side The originating network side may support the “early-session“ extension as described in RFC 3959 7.For the early session model, if the CRS service is provided by the originating network, the CRS AS shall control an MRF as described i

49、n 3GPP TS 24.229 3 that is acting on behalf of a calling subscriber who has activated CRS. The CRS service implementing the download and play model adds no additional requirements on the originating network side. 4.3.1.3 Requirements on the terminating network side The terminating network side may support the “early-session“ extension as described in RFC 3959 7. NOTE: the CRS service implementing the early-session model needs the early-session extension to be supported by intermediate entities and the terminating UE, else CRS media can