ETSI TS 124 239-2017 Digital cellular telecommunications system (Phase 2+) (GSM) Universal Mobile Telecommunications System (UMTS) LTE Flexible Alerting (FA) using IP Multimedia (I.pdf

1、 ETSI TS 124 239 V14.0.0 (2017-03) Digital cellular telecommunications system (Phase 2+) (GSM); Universal Mobile Telecommunications System (UMTS); LTE; Flexible Alerting (FA) using IP Multimedia (IM) Core Network (CN) subsystem; Protocol specification (3GPP TS 24.239 version 14.0.0 Release 14) TECHN

2、ICAL SPECIFICATION ETSI ETSI TS 124 239 V14.0.0 (2017-03)13GPP TS 24.239 version 14.0.0 Release 14Reference RTS/TSGC-0124239ve00 Keywords GSM,LTE,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 74

3、2 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic an

4、d/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) versio

5、n kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStat

6、us.aspx If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photoco

7、pying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 201

8、7. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks regis

9、tered and owned by the GSM Association. ETSI ETSI TS 124 239 V14.0.0 (2017-03)23GPP TS 24.239 version 14.0.0 Release 14Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if a

10、ny, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available

11、on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or

12、may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identiti

13、es. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “sho

14、uld not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI T

15、S 124 239 V14.0.0 (2017-03)33GPP TS 24.239 version 14.0.0 Release 14Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 5g31 Scope 6g32 References 6g33 Definitions and abbreviations . 6g33.1 Definitions 6g33.2 Abbreviations . 7g34 Flexible Alerting (FA) 7g34.

16、1 Introduction 7g34.2 Description . 7g34.2.1 General description . 7g34.3 Operational requirements . 8g34.3.1 Provision/withdrawal 8g34.3.2 Requirements on the originating network side 8g34.3.3 Requirements on the terminating network side . 9g34.4 Syntax requirements . 9g34.5 Signalling procedures .

17、 9g34.5.1 General 9g34.5.2 Activation/deactivation . 9g34.5.2.1 General 9g34.5.2.2 Demand member activation of a subscribers default FA group(s) . 9g34.5.2.3 Demand member activation of a specified FA group 9g34.5.2.4 Demand member deactivation of a subscribers default FA group(s) 10g34.5.2.5 Demand

18、 member deactivation of a specified FA group 10g34.5.3 Registration/erasure 10g34.5.4 Interrogation . 10g34.5.4.1 General 10g34.5.4.2 Interrogation using Ut interface 10g34.5.4.3 Interrogation using the SIP-based user configuration . 10g34.5.5 Invocation and operation 10g34.5.5.1 Actions at the AS s

19、erving the originating UE . 10g34.5.5.2 Actions at the AS serving the pilot identity 10g34.6 Interaction with other services 11g34.6.1 Communication session Hold (HOLD). 11g34.6.2 Terminating Identification Presentation (TIP) 11g34.6.3 Terminating Identification Restriction (TIR) 11g34.6.4 Originati

20、ng Identification Presentation (OIP) . 11g34.6.5 Originating Identification Restriction (OIR) . 11g34.6.6 Conference (CONF) 12g34.6.7 Communication DIVersion services (CDIV) 12g34.6.7.1 Communication Forwarding Unconditional (CFU) 12g34.6.7.2 Communication Forwarding Busy (CFB) . 12g34.6.7.3 Communi

21、cation Forwarding No Reply (CFNR) . 12g34.6.7.4 Communication Forwarding Not Reachable (CFNRc) . 12g34.6.7.5 Communication Deflection (CD) 13g34.6.7.6 Communication Forwarding on Not Logged-In (CFNL) 13g34.6.8 Message Waiting Indication (MWI) . 13g34.6.9 Communication Barring (CB). 13g34.6.10 Explic

22、it Communication Transfer (ECT) . 13g34.7 Parameter values (timers) . 13g34.8 Service configuration . 13g34.8.1 General 13g3ETSI ETSI TS 124 239 V14.0.0 (2017-03)43GPP TS 24.239 version 14.0.0 Release 144.8.2 Data semantics 14g34.8.3 XML schema 14g3Annex A (informative): Signalling flows 15g3A.1 Sco

23、pe of signalling flows . 15g3A.2 Introduction 15g3A.3 FA model signalling flow . 15g3A.3.1 Introduction 15g3A.3.2 FA when UE#1 and UE#2 have resources available and UE#3 does not have required resources available . 15g3Annex B (informative): Example of filter criteria . 22g3Annex C (informative): Ch

24、ange history . 23g3History 24g3ETSI ETSI TS 124 239 V14.0.0 (2017-03)53GPP TS 24.239 version 14.0.0 Release 14Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The contents of the present document are subject to continuing work within the

25、 TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for inf

26、ormation; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been

27、 incorporated in the document. ETSI ETSI TS 124 239 V14.0.0 (2017-03)63GPP TS 24.239 version 14.0.0 Release 141 Scope The present document provides the protocol details for the Flexible Alerting supplementary service in the IP Multimedia (IM) Core Network (CN) subsystem based on the requirements fro

28、m 3GPP TS 22.173 2. Flexible Alerting (FA) causes a call to a pilot identity to branch the call into several legs to alert several termination addresses (group members) simultaneously. The first leg to be answered is connected to the calling party. The other call legs are abandoned. The present docu

29、ment is applicable to User Equipment (UE) and Application Servers (AS) which are intended to support the FA supplementary service. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are either speci

30、fic (identified by date of publication, edition number, version number, etc.) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specif

31、ic reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP TR 21.905: “Vocabulary for 3GPP Specifications“. 2 3GPP TS 22.173: “IP Multimedia Core Network Subsystem (IMS) Multimedia Telephony Service and supplementary services; Stage 1“.

32、3 3GPP TS 23.002: “Network architecture“. 4 3GPP TS 24.238: “Session Initiation Protocol (SIP) based user configuration; Stage 3“. 5 3GPP TS 24.229: “Internet Protocol (IP) multimedia call control protocol based on Session Initiation Protocol (SIP) and Session Description Protocol (SDP); Stage 3“. 6

33、 3GPP TS 24.623: “Extensible Markup Language (XML) Configuration Access Protocol (XCAP) over the Ut interface for Manipulating Simulation Services“. 7 3GPP TS 29.228: “IP Multimedia (IM) Subsystem Cx and Dx interfaces; Signalling flows and message contents“. 3 Definitions and abbreviations 3.1 Defin

34、itions For the purposes of the present document, the terms and definitions given in 3GPP TR 21.905 1 and the following apply. A term defined in the present document takes precedence over the definition of the same term, if any, in 3GPP TR 21.905 1. ETSI ETSI TS 124 239 V14.0.0 (2017-03)73GPP TS 24.2

35、39 version 14.0.0 Release 143.2 Abbreviations For the purposes of the present document, the abbreviations given in 3GPP TR 21.905 1 and the following apply. An abbreviation defined in the present document takes precedence over the definition of the same abbreviation, if any, in 3GPP TR 21.905 1. AS

36、Application Server CS Circuit SwitchedCN Core Network FA Flexible AlertingIP Internet Protocol IM IP MultimediaMMTEL Multimedia Telephony 4 Flexible Alerting (FA) 4.1 Introduction Flexible Alerting (FA) causes a call to a Pilot Identity to branch the call into several legs to alert several terminati

37、on addresses (group members) simultaneously. Additional calls may be delivered to the FA Pilot Identity at any time. The first leg to be answered is connected to the calling party. The other call legs are abandoned. The members of an FA group are described by a list of termination addresses. 4.2 Des

38、cription 4.2.1 General description FA may be used for either a single user or multiple users. The difference between the two is in determining when the FA group is busy. In the single user case, the group is considered to be busy when one of the members is considered to be busy. In the multiple user

39、 case, the group is considered to be busy when all of the accessible members are considered to be busy. A member is considered to be busy when it cannot accept the presentation of another call. The FA pilot identity may have features to manage incoming calls (e.g., Incoming Communications Barring).

40、These features should take precedence over the corresponding features of individual members as described in subclause 4.6. If an FA pilot identity is an FA member Identity, the FA member loses his or her individual incoming call features. In this case, the FA members incoming call features are super

41、seded by the incoming call features of the FA pilot identity. If an FA pilot identity is not an FA member Identity, the features of the FA pilot identity may be changed only through user or service provider configuration. FA does not affect the ability of an FA member to originate calls. FA may affe

42、ct the ability of an FA member to receive calls. If an FA member has only a single identity that is the same as the FA pilot identity, the FA member may not receive calls except through the FA pilot identity. If an FA member has an identity different than the FA pilot identity, the FA member may rec

43、eive calls as an individual as well as calls through the FA pilot identity. Such an FA member may use revertive calling (i.e., a call to itself) for other purposes, such as retrieval of voice mail. ETSI ETSI TS 124 239 V14.0.0 (2017-03)83GPP TS 24.239 version 14.0.0 Release 144.3 Operational require

44、ments 4.3.1 Provision/withdrawal The FA service may be provided after prior arrangement with the service provider. The establishment of the initial constituency (membership) of the FA group, along with additions to or subtractions from the set of group members, is performed by the service provider.

45、The FA service may be withdrawn at the subscribers request or for administrative reasons. Withdrawal of the FA service means dissolution of the FA group and results in calls to the Pilot Identity being treated as calls to a vacant identity. Withdrawal of the FA service is performed by the service pr

46、ovider. As determined by service provider provisioning, the FA group may have the following subscription options, as summarized in table 4.3.1-1. Table 4.3.1-1: FA group subscription options Subscription option values Values Type - Single User. The FA group is considered to be busy when any member o

47、f the group is considered to be busy. - Multiple Users. The FA group is considered to be busy when all accessible members of the group are considered to be busy. As determined by service provider provisioning, the FA member may have the following subscription options, as summarized in table 4.3.1-2.

48、 Table 4.3.1-2: FA member subscription options Subscription option values Values Membership - Demand. An FA member is authorized to activate or deactivate his or her membership in the FA group(s). - Permanent. An FA member is always a member of his or her registered FA group(s). If an FA group is of

49、 type demand activation, any configured FA member is able to, by means of user configuration, change their status in the FA group from active to inactive or from inactive to active. The FA member status options are summarized in table 4.3.1-3. Table 4.3.1-3: FA member status options Subscription option values Values Status - Active. An FA member is eligible to be alerted when a call is placed to the Pilot Identity. - Inactive. An FA member is not eligible to be alerted when a call is placed to the Pilot Identity Available user confi