ETSI TS 124 247-2016 Digital cellular telecommunications system (Phase 2+) Universal Mobile Telecommunications System (UMTS) LTE Messaging service using the IP Multimedia (IM) Core.pdf

1、 ETSI TS 1Digital cellular telecoUniversal Mobile TelMessaging serviCore Ne(3GPP TS 24.2TECHNICAL SPECIFICATION124 247 V13.0.0 (2016communications system (Phaelecommunications System (LTE; rv ce using the IP Multimedia (etwork (CN) subsystem; Stage 3 .247 version 13.0.0 Release 1316-01) hase 2+); (U

2、MTS); a (IM) 13) ETSI ETSI TS 124 247 V13.0.0 (2016-01)13GPP TS 24.247 version 13.0.0 Release 13Reference RTS/TSGC-0124247vd00 Keywords GSM,LTE,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742

3、C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/

4、or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version

5、kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If y

6、ou find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and mi

7、crofilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2016. All right

8、s reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and ow

9、ned by the GSM Association. ETSI ETSI TS 124 247 V13.0.0 (2016-01)23GPP TS 24.247 version 13.0.0 Release 13Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publi

10、cly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI

11、Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or m

12、ay become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These sh

13、ould be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “m

14、ay“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 124 247 V1

15、3.0.0 (2016-01)33GPP TS 24.247 version 13.0.0 Release 13Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 5g31 Scope 6g32 References 6g33 Definitions, symbols and abbreviations . 7g33.1 Definitions 7g33.2 Abbreviations . 7g34 Messaging overview . 8g35 Proto

16、col using SIP for page-mode messaging 8g35.1 Introduction 8g35.1.1 Sending immediate message to multiple recipients 8g35.2 Functional entities 9g35.2.1 User Equipment (UE) . 9g35.2.2 Application Server (AS) . 9g35.2.3 Media Resource Function Controller (MRFC) . 9g35.3 Role 9g35.3.1 Participant . 9g3

17、5.3.1.1 General 9g35.3.1.2 Sending of an immediate message 9g35.3.1.3 Receiving an immediate message . 9g35.3.1.4 Consent to list server distribution 10g35.3.2 Application Server (AS) . 10g35.3.2.1 Receiving an immediate message for unregistered Public User Identity 10g35.3.3 List Server . 10g35.3.3

18、.1 List server originating case . 10g35.3.3.2 List server terminating case. 10g35.3.3.3 List Server processing the MESSAGE URI-list 11g35.3.3.4 List server support of MESSAGE URI-lists . 11g36 Protocol using SIP for session-mode messaging 11g36.1 Introduction 11g36.2 Functional entities 11g36.2.1 Us

19、er Equipment (UE) . 11g36.3 Role 12g36.3.1 Participant . 12g36.3.1.1 General 12g36.3.1.2 Session initiation - mobile originating case 12g36.3.1.3 Session initiation - mobile terminating case 12g36.3.2 Intermediate Node. 12g36.3.2.1 General 12g36.3.2.2 Generic procedures for all methods at the interm

20、ediate node . 12g36.3.2.2.1 Intermediate node originating case . 12g36.3.2.2.2 Intermediate node terminating case . 12g36.3.2.3 Session Initiation . 13g36.3.2.3.1 Session initiation originating case 13g36.3.2.3.2 Session initiation terminating case . 13g37 Protocol using SIP for session-mode messagi

21、ng conferences 13g37.1 Introduction 13g37.2 Functional entities 13g37.2.1 User Equipment (UE) . 13g3ETSI ETSI TS 124 247 V13.0.0 (2016-01)43GPP TS 24.247 version 13.0.0 Release 137.2.2 Media Resource Function Controller (MRFC) . 13g37.2.3 Conferencing Application Server (AS) . 13g38 Protocol using S

22、DP for session-mode messaging and session-mode messaging conferences . 14g38.1 Introduction 14g38.2 Functional entities 14g38.2.1 User Equipment (UE) . 14g38.2.2 Media Resource Function Controller (MRFC) . 14g38.2.3 Application Server (AS) . 14g38.3 Role 14g38.3.1 SDP offerer . 14g38.3.2 SDP answere

23、r 15g38.3.3 Void 16g39 Protocol using MSRP for session-mode messaging and session-mode messaging conferences 16g39.1 Introduction 16g39.2 Functional entities 16g39.2.1 User Equipment (UE) . 16g39.2.1.1 General 16g39.2.2 Application Server (AS) . 16g39.2.3 Media Resource Function Processor (MRFP) 16g

24、39.3 Role 16g39.3.1 MSRP sender 16g39.3.1.1 MSRP sender sends a message 16g39.3.2 MSRP receiver 17g39.3.3 Intermediate node . 17g39.3.3.1 Intermediate node terminating case . 17g39.3.3.2 Intermediate node originating case 17g310 Void 18g3Annex A (informative): Example signalling flows of messaging s

25、ervice operation 19g3A.1 Scope of signalling flows . 19g3A.2 Introduction 19g3A.2.1 General . 19g3A.2.2 Key required to interpret signalling flows 19g3A.3 Signalling flows demonstrating immediate messaging 19g3A.4 Signalling flows demonstrating session-based messaging . 19g3A.4.1 Introduction 19g3A.

26、4.2 Establishing a session for session-based messaging without preconditions . 20g3A.4.3 Establishing a session for session-based messaging with Intermediate Nodes 34g3A.4.4 Establishing a session for session-based messaging with preconditions 57g3A.5 Flows demonstrating session-based messaging conf

27、erences . 58g3A.5.1 User connecting into a messaging conference 58g3A.5.2 MRFC/AS invites a user to a messaging conference 67g3Annex B (informative): Change history . 77g3History 80g3ETSI ETSI TS 124 247 V13.0.0 (2016-01)53GPP TS 24.247 version 13.0.0 Release 13Foreword This Technical Specification

28、has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an id

29、entifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all cha

30、nges of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TS 124 247 V13.0.0 (2016-01)63GPP TS 24.247 version 13.0.0 Release 131 Scope The present document provides the pro

31、tocol details for the messaging service within the IP Multimedia CN Subsystem (IMS) based on the Session Initiation Protocol (SIP), the Session Description Protocol (SDP) and, the Message Session Relay Protocol (MSRP) . The document covers immediate messaging, session based messaging and session-bas

32、ed messaging conferences, as described in 3GPP TS 22.340 11. Where possible the present document specifies the requirements for this protocol by reference to specifications produced by the IETF within the scope of SIP, SDP and, MSRP, either directly, or as modified by 3GPP TS 24.229 5. The present d

33、ocument is applicable to Application Servers (ASs) , Media Resource Function Controllers (MRFCs), Media Resource Function Processors (MRFPs) and to User Equipment (UE) providing messaging capabilities. This document does not cover the signalling between a MRFC and a MRFP. 2 References The following

34、documents contain provisions which, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. For a specific reference, subsequent revisions do not apply. Fo

35、r a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP TR 21.905: “Vocabulary for 3GPP Spec

36、ifications“. 2 3GPP TS 22.228: “Service requirements for the Internet Protocol (IP) multimedia core network subsystem; Stage 1“. 3 3GPP TS 23.218: “IP Multimedia (IM) Session Handling; IP Multimedia (IM) call model; Stage 2“. 4 3GPP TS 24.228 Release 5: “Signalling flows for the IP multimedia call c

37、ontrol based on SIP and SDP; Stage 3“. 5 3GPP TS 24.229: “IP multimedia call control protocol based on Session Initiation Protocol (SIP) and Session Description Protocol (SDP); Stage 3“. 6 3GPP TS 23.228: “IP Multimedia Subsystem (IMS); Stage 2“. 7 IETF RFC 3261 (March 2002): “SIP: Session Initiatio

38、n Protocol“. 8 IETF RFC 3428 (December 2002): “Session Initiation Protocol (SIP) Extension for Instant Messaging“. 9 IETF RFC 4975 (September 2007): “The Message Session Relay Protocol (MSRP)“. 10 3GPP TS 24.147: “Conferencing using the IP Multimedia (IM) Core Network (CN) subsystem; Stage 3“. 11 3G

39、PP TS 22.340: “IP Multimedia System (IMS) messaging; Stage 1“. 12 IETF RFC 5365 (October 2008): “Multiple-Recipient MESSAGE Requests in the Session Initiation Protocol (SIP)“. 13 IETF RFC 3994 (January 2005): “Indication of Message Composition for Instant Messaging“. ETSI ETSI TS 124 247 V13.0.0 (20

40、16-01)73GPP TS 24.247 version 13.0.0 Release 1314 3GPP TS 26.141 “IP Multimedia System (IMS) Messaging and Presence; Media formats and codecs“. 15 IETF RFC 5547 (May 2009): “A Session Description Protocol (SDP) Offer/Answer Mechanism to Enable File Transfer“. 16 IETF RFC 5360 (October 2008): “A Fram

41、ework for Consent-Based Communications in the Session Initiation Protocol (SIP)“. 17 3GPP2 C.S0050-B: “3GPP2 File Formats for Multimedia Services“. 18 IETF RFC 6135 (February 2011): “An Alternative Connection Model for the Message Session Relay Protocol (MSRP)“. 19 IETF RFC 6714 (August 2012): “ Con

42、nection Establishment for Media Anchoring (CEMA) for the Message Session Relay Protocol (MSRP)“. 3 Definitions, symbols and abbreviations 3.1 Definitions IsComposing information This is a term used to indicate that an indication is sent to the communicating user when a user in entering a new message

43、. For the purposes of the present document, the following terms and definitions given in 3GPP TS 22.340 11 apply: Immediate messaging Session based messaging Session based messaging conferences For the purposes of the present document, the following terms and definitions given in RFC 4975 9 apply: H

44、ost Page-mode messaging Session inactivity timer Session-mode messaging Session-mode messaging conferences Visitor For the purposes of the present document, the following terms and definitions given in 3GPP TS 24.147 10 apply: Conferencing Application Server 3.2 Abbreviations For the purposes of the

45、 present document, the following abbreviations apply: AS Application Server CN Core NetworkDM Data manipulator DMS Data manipulation server IM IP Multimedia IMS IP Multimedia CN subsystem IP Internet Protocol MRFC Media Resource Function Controllers ETSI ETSI TS 124 247 V13.0.0 (2016-01)83GPP TS 24.

46、247 version 13.0.0 Release 13MRFP Media Resource Function Processors MSRP Message Session Relay Protocol SBLP Service Based Local Policy SDP Session Description Protocol SIP Session Initiation Protocol UE User Equipment URL Uniform Resource Locator 4 Messaging overview The basic services for the IP

47、Multimedia core network Subsystem (IMS), as defined in 3GPP TS 24.229 5, allow a user to initiate, modify and terminate media sessions using the Session Initiation Protocol, as defined in RFC 3261 7. Although these basic mechanisms already allow the exchange of instant messaging information using SI

48、P, this functionality can be extended to provide a richer service within the IMS. The messaging service within the IM CN subsystem provides the means for a user to send or receive single messages immediately to / from another user and to create and participate in a messaging conference with one ore

49、more other users. Participants to such message based communication may be internal or external to the home network. When to use an immediate message and when to use a session-based messaging session will depend on the application. NOTE: Some participants may always use session-based messaging, while others may use immediate messaging or a combination of session-based messaging and immediate messaging dependant of the characteristics of the messaging session. The criteria are implementation and application spec