ETSI TS 124 482-2017 LTE Mission Critical Services (MCS) identity management Protocol specification (V14 2 0 3GPP TS 24 482 version 14 2 0 Release 14 Includes Diskette)《长期演进技术(LTE).pdf

1、 ETSI TS 1Mission Critical SerProt(3GPP TS 24.4TECHNICAL SPECIFICATION124 482 V13.2.0 (2017LTE; ervices (MCS) identity managerotocol specification .482 version 13.2.0 Release 1317-01) gement; 13) ETSI ETSI TS 124 482 V13.2.0 (2017-01)13GPP TS 24.482 version 13.2.0 Release 13Reference DTS/TSGC-012448

2、2vd20 Keywords LTE ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be

3、downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any ex

4、isting or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be s

5、ubject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.or

6、g/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without

7、 the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2017. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Membe

8、rs. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 124 482 V13.2.0 (2017-01)23GPP TS 24.482 version 13.2.0 Release 13Intellectual

9、Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs

10、); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been c

11、arried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI 3rd G

12、eneration Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3

13、GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Dra

14、fting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 124 482 V13.2.0 (2017-01)33GPP TS 24.482 version 13.2.0 Release 13Contents Intellectual Property Rights 2g3Foreword . 2g3Modal ver

15、bs terminology 2g3Foreword . 4g31 Scope 5g32 References 5g33 Definitions and abbreviations . 6g33.1 Definitions 6g33.2 Abbreviations . 6g34 General . 6g34.1 Identity management 6g35 Entities 7g35.1 Identity management client 7g35.2 Identity management server . 7g35.3 MCPTT client . 8g35.4 HTTP proxy

16、 8g36 Authentication procedures 8g36.1 General . 8g36.2 Identity management client procedures 8g36.2.1 User authentication . 8g36.3 Identity management server procedures . 9g36.3.1 User authentication . 9g37 Inter/intra domain interface security 10g3Annex A (normative): HTTP entities . 11g3A.1 Scope

17、 11g3A.2 Procedures 11g3A.2.1 HTTP client 11g3A.2.1.1 General 11g3A.2.1.2 HTTP client in UE 11g3A.2.1.3 HTTP client in network entity 12g3A.2.2 HTTP proxy 12g3A.2.2.1 General 12g3A.2.2.2 HTTP request method from HTTP client in UE . 12g3A.2.2.3 HTTP request method from HTTP client in network entity w

18、ithin trust domain . 13g3A.2.3 HTTP server . 13g3Annex B (informative): Change history . 14g3History 15g3ETSI ETSI TS 124 482 V13.2.0 (2017-01)43GPP TS 24.482 version 13.2.0 Release 13Foreword This Technical Specification has been produced by the 3rdGeneration Partnership Project (3GPP). The content

19、s of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows:

20、 Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z t

21、he third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TS 124 482 V13.2.0 (2017-01)53GPP TS 24.482 version 13.2.0 Release 131 Scope This document specifies the identity management and authentication protocols needed to support Mission Critical Pus

22、h To Talk (MCPTT). Identity management applies only to on-network operation. Mission critical communication services are services that require preferential handling compared to normal telecommunication services, e.g. in support of police or fire brigade. The MCPTT service can be used for public safe

23、ty applications and also for general commercial applications (e.g., utility companies and railways). This document is applicable to User Equipment (UE) supporting the identity management client functionality, and to application servers supporting the identity management server functionality. 2 Refer

24、ences The following documents contain provisions which, through reference in this text, constitute provisions of the present document. - References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. - For a specific reference, subsequent re

25、visions do not apply. - For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP TR 21.905:

26、 “Vocabulary for 3GPP Specifications“. 2 3GPP TS 33.179: “Security of Mission Critical Push-To-Talk (MCPTT)“. 3 3GPP TS 22.179: “Mission Critical Push To Talk (MCPTT) over LTE“. 4 IETF RFC 2616: “Hypertext Transfer Protocol - HTTP/1.1“. 5 IETF RFC 6749: “The OAuth 2.0 Authorization Framework“. 6 “Op

27、enID Connect Core 1.0 incorporating errata set 1“. 7 W3C.REC-html401-19991224: “HTML 4.01 Specification. 8 3GPP TS 23.179: “Functional architecture and information flows to support mission critical communication services“. 9 3GPP TS 23.179: “Functional architecture and information flows to support m

28、ission critical communication services; Stage 2“. 10 IETF RFC 2818: “HTTP Over TLS“. 11 3GPP TS 24.383: “Mission Critical Push To Talk (MCPTT) Management Object (MO)“. 12 3GPP TS 24.379: “Mission Critical Push To Talk (MCPTT) call control Protocol specification“. 13 3GPP TS 23.228: “IP Multimedia Su

29、bsystem (IMS); Stage 2“. 14 IETF RFC 6750: “The OAuth 2.0 Authorization Framework: Bearer Token Usage“. 15 3GPP TS 24.109: “Bootstrapping interface (Ub) and network application function interface (Ua); Protocol details“. ETSI ETSI TS 124 482 V13.2.0 (2017-01)63GPP TS 24.482 version 13.2.0 Release 13

30、3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in 3GPP TR 21.905 1 and the following apply. A term defined in the present document takes precedence over the definition of the same term, if any, in 3GPP TR 21.905 1. IdM client

31、 id: The client_id as specified in 3GPP TS 33.179 2 which is used to identify the IdM client to the IdM server. Authorisation endpoint: An identity management server protocol endpoint used by the identity management client to obtain an authorisation grant, as specified in IETF RFC 6749 5. Token endp

32、oint: An identity management server protocol endpint used by the identity management client to exchange an authorisation grant for an access token, as specified in IETF RFC 6749 5. For the purposes of the present document, the following terms and definitions given in 3GPP TS 22.179 3 apply: MCPTT UE

33、 For the purposes of the present document, the following terms and definitions given in 3GPP TS 23.179 8 apply: MCPTT group ID MCPTT ID For the purposes of the present document, the following terms and definitions given in 3GPP TS 23.228 13 apply: Public service identity 3.2 Abbreviations For the pu

34、rposes of the present document, the abbreviations given in 3GPP TR 21.905 1 and the following apply. An abbreviation defined in the present document takes precedence over the definition of the same abbreviation, if any, in 3GPP TR 21.905 1. HTTP Hypertext Transfer Protocol IdM Identity Management LT

35、E Long Term Evolution MC ID Mission Critical User Identity MCPTT Mission Critical Push To Talk OIDC OpenID Connect TLS Transport Layer Security UE User Equipment 4 General 4.1 Identity management The Identity Management functional model for MCPTT is shown in figure 4.1-1 below and consists of the id

36、entity management server located in the MCPTT common services core and the identity management client located in the MCPTT UE. The IdM server and the IdM client in the MCPTT UE establish the foundation for MCPTT user authentication and user authorisation. ETSI ETSI TS 124 482 V13.2.0 (2017-01)73GPP

37、TS 24.482 version 13.2.0 Release 13Figure 4.1-1: Functional model for MCPTT identity management The CSC-1 reference point, between the MCPTT IdM client in the UE and the Identity Management server, provides the interface for user authentication. CSC-1 supports OpenID Connect Core 1.0 6 and IETF RFC

38、6749 5. The OpenID Connect profile for MCPTT is implemented as described in 3GPP TS 33.179 2. The MCPTT user authentication, the MCPTT user authorisation, the OpenID Connect Core 1.0 6 and the OpenID Connect profile described in 3GPP TS 33.179 2 for MCPTT forms the basis of the MCPTT identity manage

39、ment architecture. Subclause 6.3 describes the procedures for the MCPTT user authentication. OIDC is flexible with respect to the user authentication mechanism used. As 3GPP TS 33.179 2 has indicated that username and password authentication is mandatory to support, that mechanism is included in sub

40、clause 6.3, although other mechanisms are possible. When the MCPTT user is authenticated, the procedure will provide an id token, an access token and a refresh token, which are all described in 3GPP TS 33.179 2. The access token is scoped to the services the MCPTT user is authorised for, e.g., group

41、 management services, key management services and MCPTT services. The access token will be utilized for MCPTT service authorisation, the procedure which is documented in 3GPP TS 24.379 12. 5 Entities 5.1 Identity management client The identity management client acts as the application user agent for

42、 MC ID transactions. It interacts with the identity management server. The identity management client: - shall support identity management registration to the identity management server; - shall support the MCPTT user authentication framework as specified in 3GPP TS 33.179 2; - shall support a usern

43、ame and password method of authentication as specified in 3GPP TS 33.179 2; and - may support additional methods of authentication. 5.2 Identity management server The identity management server is a functional entity that is capable of authenticating the MC ID. It contains the knowledge and means to

44、 do authentication by verifying the credentials supplied by the user. The identity management server: - shall support identity management registration of the identity management client; - shall support the MCPTT user authentication framework as specified in 3GPP TS 33.179 2; - shall support a userna

45、me and password method of authentication as specified in 3GPP TS 33.179 2; and ETSI ETSI TS 124 482 V13.2.0 (2017-01)83GPP TS 24.482 version 13.2.0 Release 13- may support additional methods of authentication. 5.3 MCPTT client The MCPTT client shall interact with the IdM client as specified in subcl

46、ause 6.2: - to trigger initiation of the user authentication procedure; and - to receive the credentials obtained from the IdM server. 5.4 HTTP proxy The HTTP proxy acts as the proxy for all hypertext transactions between the HTTP client and the HTTP server. The HTTP proxy terminates the TLS session

47、 with the HTTP client of the MCPTT UE in order to allow the HTTP client to establish a single TLS session for hypertext transactions with multiple HTTP servers as specified in 3GPP TS 23.179 9. NOTE: The HTTP proxy is in the same trust domain as the HTTP servers that are located within a MCPTT servi

48、ce provider“s network. 6 Authentication procedures 6.1 General 6.2 Identity management client procedures 6.2.1 User authentication Upon an indication from the MCPTT client to initiate MCPTT user authentication, the IdM client shall perform the user authentication procedure according to 3GPP TS 33.17

49、9 2 with the following clarifications: 1) shall establish a TLS tunnel to the authorisation endpoint of the IdM server as specified in 3GPP TS 33.179 2 using the configured URL of the authorisation endpoint of the IdM server as specified in the “/OnNetwork/AppServerInfo/IDMSAuthEndpoint“ leaf node defined in 3GPP TS 24.383 11 and the clarifications in annex A; 2) shall generate an OIDC Authentication Request message as specified in the OpenID Connect 1.0 6 and IETF RFC 6749 5 with the fol