ETSI TS 125 104-2016 Universal Mobile Telecommunications System (UMTS) Base Station (BS) radio transmission and reception (FDD) (V13 3 0 3GPP TS 25 104 version 13 3 0 Release 13)《通.pdf

1、 ETSI TS 12Universal Mobile TelBase Station (BS) rad(3GPP TS 25.10TECHNICAL SPECIFICATION125 104 V11.12.0 (201elecommunications System (adio transmission and receptio.104 version 11.12.0 Release 1016-01) (UMTS); tion (FDD) 11) ETSI ETSI TS 125 104 V11.12.0 (2016-01)13GPP TS 25.104 version 11.12.0 Re

2、lease 11Reference RTS/TSGR-0425104vbc0 Keywords UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important n

3、otice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written author

4、ization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should b

5、e aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following service

6、s: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall

7、 not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2016. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for

8、the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 125 104 V11.12.0 (2016-01)23GPP TS 25.104 version 11.12

9、.0 Release 11Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellec

10、tual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, includin

11、g IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has b

12、een produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross refe

13、rence between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in

14、clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 125 104 V11.12.0 (2016-01)33GPP TS 25.104 version 11.12.0 Release 11Contents Intellectual Property Right

15、s 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 7g31 Scope 8g32 References 8g33 Definitions and abbreviations . 8g33.1 Definitions 8g33.2 Abbreviations . 10g33.3 Symbols 11g34 General . 12g34.1 Relationship between Minimum Requirements and Test Requirements 12g34.2 Base station classes 12g3

16、4.3 Regional requirements 13g34.4 Environmental requirements for the BS equipment . 14g34.5 Applicability of requirements . 14g34.6 Requirements for contiguous and non-contiguous spectrum 14g34.7 Requirements for BS capable of multi-band operation 15g35 Frequency bands and channel arrangement 15g35.

17、1 General . 15g35.2 Frequency bands . 15g35.3 Tx-Rx frequency separation . 17g35.4 Channel arrangement 18g35.4.1 Channel spacing 18g35.4.2 Channel raster . 18g35.4.3 Channel number 18g36 Transmitter characteristics . 20g36.1 General . 20g36.2 Base station output power 21g36.2.1 Base station maximum

18、output power 21g36.2.1.1 Minimum requirement 21g36.3 Frequency error 22g36.3.1 Minimum requirement 22g36.4 Output power dynamics 22g36.4.1 Inner loop power control in the downlink . 22g36.4.1.1 Power control steps . 22g36.4.1.1.1 Minimum requirement . 22g36.4.2 Power control dynamic range . 23g36.4.

19、2.1 Minimum requirements. 23g36.4.3 Total power dynamic range 23g36.4.3.1 Minimum requirement 23g36.4.4 Primary CPICH power 23g36.4.4.1 Minimum requirement 23g36.4.4A Secondary CPICH power 23g36.4.4A.1 Minimum Requirement for MIMO mode . 24g36.4.4A.2 Minimum Requirement for MIMO mode with four trans

20、mit antennas . 24g36.4.4B Demodulation CPICH power for MIMO mode with four transmit antennas . 24g36.4.4B.1 Minimum Requirement . 24g36.4.5 IPDL time mask 24g36.4.5.1 Minimum Requirement . 24g36.4.6 Home base station output power for adjacent channel protection . 25g3ETSI ETSI TS 125 104 V11.12.0 (2

21、016-01)43GPP TS 25.104 version 11.12.0 Release 116.4.6.1 Minimum requirement 26g36.5 (void) 26g36.6 Output RF spectrum emissions . 26g36.6.1 Occupied bandwidth . 26g36.6.1.1 Minimum requirement 26g36.6.2 Out of band emission 26g36.6.2.1 Spectrum emission mask . 26g36.6.2.2 Adjacent Channel Leakage p

22、ower Ratio (ACLR) . 32g36.6.2.2.1 Minimum requirement . 32g36.6.2.2.2 Cumulative ACLR requirement in non-contiguous spectrum . 33g36.6.3 Spurious emissions . 34g36.6.3.1 Mandatory Requirements 34g36.6.3.1.1 Spurious emissions (Category A) 34g36.6.3.1.2 Spurious emissions (Category B) 35g36.6.3.2 Pro

23、tection of the BS receiver of own or different BS . 36g36.6.3.2.1 Minimum Requirement . 36g36.6.3.3 Co-existence with other systems in the same geographical area . 38g36.6.3.3.1 Minimum Requirements 39g36.6.3.4 Co-existence with co-located and co-sited base stations . 42g36.6.3.4.1 Minimum Requireme

24、nts 43g36.6.3.5 Co-existence with PHS . 48g36.6.3.5.1 Minimum Requirement . 48g36.6.3.6 Co-existence with services in adjacent frequency bands. 48g36.6.3.6.1 Minimum requirement. 48g36.6.3.7 Void. 49g36.6.3.7.1 Void . 49g36.6.3.7.2 Void . 49g36.6.3.8 Protection of Public Safety Operations . 49g36.6.

25、3.8.1 Minimum Requirement . 49g36.6.3.9 Co-existence with Home BS operating in other bands 49g36.6.3.9.1 Minimum Requirements 50g36.7 Transmitter intermodulation . 51g36.7.1 Minimum requirement 51g36.8 Transmit modulation 51g36.8.1 Transmit pulse shape filter 52g36.8.2 Error Vector Magnitude 52g36.8

26、.2.1 Minimum requirement 52g36.8.3 Peak code Domain error . 52g36.8.3.1 Minimum requirement 52g36.8.4 Time alignment error 52g36.8.4.1 Minimum Requirements 53g36.8.5 Relative Code Domain Error for 64QAM modulation. 53g36.8.5.1 Minimum requirement 53g37 Receiver characteristics 53g37.1 General . 53g3

27、7.2 Reference sensitivity level 54g37.2.1 Minimum requirement 54g37.2.2 Maximum Frequency Deviation for Receiver Performance . 54g37.3 Dynamic range . 54g37.3.1 Minimum requirement 54g37.4 Adjacent Channel Selectivity (ACS) 55g37.4.1 Minimum requirement 55g37.4.2 Minimum requirement - Co-location wi

28、th UTRA-TDD . 55g37.5 Blocking characteristics . 55g37.5.1 Minimum requirement 55g37.5.2 Minimum Requirement - Co-location with GSM, DCS, PCS, CDMA, UTRA and/or E-UTRA, UTRA TDD and/or E-UTRA TDD 64g37.5.3 Void 70g37.6 Intermodulation characteristics 70g37.6.1 Minimum requirement 70g37.7 Spurious em

29、issions . 72g3ETSI ETSI TS 125 104 V11.12.0 (2016-01)53GPP TS 25.104 version 11.12.0 Release 117.7.1 Minimum requirement 72g38 Performance requirement . 73g38.1 General . 73g38.2 Demodulation in static propagation conditions 74g38.2.1 Demodulation of DCH 74g38.2.1.1 Minimum requirement 74g38.3 Demod

30、ulation of DCH in multipath fading conditions 74g38.3.1 Multipath fading Case 1 74g38.3.1.1 Minimum requirement 74g38.3.2 Multipath fading Case 2 75g38.3.2.1 Minimum requirement 75g38.3.3 Multipath fading Case 3 75g38.3.3.1 Minimum requirement 76g38.3.4 Multipath fading Case 4 76g38.3.4.1 Minimum re

31、quirement 76g38.4 Demodulation of DCH in moving propagation conditions . 76g38.4.1 Minimum requirement 77g38.5 Demodulation of DCH in birth/death propagation conditions 77g38.5.1 Minimum requirement 77g38.5A Demodulation of DCH in high speed train conditions . 77g38.5A.1 General 77g38.5A.2 Minimum r

32、equirement 78g38.6 (void) 78g38.7 Performance requirement for RACH 78g38.7.1 Performance requirement for RACH preamble detection . 78g38.7.2 Demodulation of RACH message . 79g38.7.2.1 Minimum requirements for Static Propagation Condition 79g38.7.2.2 Minimum requirements for Multipath Fading Case 3 .

33、 79g38.7.2.3 Minimum requirements for high speed train conditions . 79g38.8 (void) 80g38.9 (void) 80g38.10 Performance of ACK/NACK detection for HS-DPCCH 80g38.10.1 ACK false alarm . 80g38.10.2 ACK mis-detection . 80g38.10A Performance of ACK/NACK detection for 4C-HSDPA HS-DPCCH 80g38.10A.1 Performa

34、nce requirements 81g38.10A.1.1 ACK false alarm 81g38.10A.1.2 ACK mis-detection 81g38.10A.2 Applicability of requirements . 82g38.10B Performance of ACK/NACK detection for 8C-HSDPA HS-DPCCH 82g38.11 Demodulation of E-DPDCH in multipath fading condition . 83g38.11A Demodulation of E-DPDCH and S-E-DPDC

35、H in multipath fading condition for UL MIMO. 83g38.12 Performance of signaling detection for E-DPCCH in multipath fading condition . 84g3Annex A (normative): Measurement channels 86g3A.1 Summary of UL reference measurement channels . 86g3A.2 UL reference measurement channel for 12.2 kbps . 87g3A.3 U

36、L reference measurement channel for 64 kbps 88g3A.4 UL reference measurement channel for 144 kbps 89g3A.5 UL reference measurement channel for 384 kbps 90g3A.6 (void) 90g3A.7 Reference measurement channels for UL RACH 91g3A.8 Reference measurement channel for HS-DPCCH 91g3A.8A Reference measurement

37、channel for HS-DPCCH for 4C-HSDPA 92g3A.9 Summary of E-DPDCH Fixed reference channels . 93g3ETSI ETSI TS 125 104 V11.12.0 (2016-01)63GPP TS 25.104 version 11.12.0 Release 11A.10 E-DPDCH Fixed reference channel 1 (FRC1) . 93g3A.11 E-DPDCH Fixed reference channel 2 (FRC2) . 94g3A.12 E-DPDCH Fixed refe

38、rence channel 3 (FRC3) . 95g3A.13 E-DPDCH Fixed reference channel 4 (FRC4) . 96g3A.14 E-DPDCH Fixed reference channel 5 (FRC5) . 97g3A.15 E-DPDCH Fixed reference channel 6 (FRC6) . 98g3A.16 E-DPDCH Fixed reference channel 7 (FRC7) . 98g3A.17 E-DPDCH Fixed reference channel 8 (FRC8) . 99g3A.18 E-DPDC

39、H Fixed reference channel 9 (FRC9) . 100g3A.19 E-DPDCH Fixed reference channel 10 (FRC10) . 101g3Annex B (normative): Propagation conditions 103g3B.1 Static propagation condition . 103g3B.2 Multi-path fading propagation conditions 103g3B.3 Moving propagation conditions 103g3B.4 Birth-Death propagati

40、on conditions . 104g3B.4A High speed train conditions 105g3B.5 Multipath fading propagation conditions for E-DPDCH and E-DPCCH . 107g3Annex C (normative): Characteristics of the W-CDMA interference signal 108g3Annex D (normative): Regional requirement for protection of DTT 109g3Annex E (informative)

41、: Change History 110g3History 114g3ETSI ETSI TS 125 104 V11.12.0 (2016-01)73GPP TS 25.104 version 11.12.0 Release 11Foreword This Technical Specification has been produced by the 3GPP. The contents of the present document are subject to continuing work within the TSG and may change following formal

42、TSG approval. Should the TSG modify the contents of this TS, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version 3.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 Indic

43、ates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the specification. ETSI ETSI TS 125 104 V11.

44、12.0 (2016-01)83GPP TS 25.104 version 11.12.0 Release 111 Scope This document establishes the Base Station minimum RF characteristics of the FDD mode of UTRA. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document.

45、 uni25CF References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. uni25CF For a specific reference, subsequent revisions do not apply. uni25CF For a non-specific reference, the latest version applies. In the case of a reference to a 3G

46、PP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 ITU-R Recommendation SM.329, “ Unwanted emissions in the spurious domain “. 2 (void) 3 ETSI ETR 273-1-2: “Electromagnetic compatibi

47、lity and Radio spectrum Matters (ERM); Improvement of radiated methods of measurement (using test sites) and evaluation of the corresponding measurement uncertainties; Part 1: Uncertainties in the measurement of mobile radio equipment characteristics; Sub-part 2: Examples and annexes“. 4 3GPP TR 25.

48、942 “RF System Scenarios“. 5 3GPP TS 45.004: “Digital cellular telecommunications system (Phase 2+); Modulation“. 6 3GPP TS 25.213: “Spreading and modulation (FDD)“. 7 ITU-R recommendation SM.328: “Spectra and bandwidth of emissions“. 8 3GPP TS 36.104: “ Evolved Universal Terrestrial Radio Access (E

49、-UTRA); Base Station (BS) radio transmission and reception“. 9 ECC/DEC/(09)03 “ Harmonised conditions for MFCN in the band 790-862 MHz“, 30 Oct. 2009 10 3GPP TS 37.104: “ E-UTRA, UTRA and GSM/EDGE; Multi-Standard Radio (MSR) Base Station (BS) radio transmission and reception“. 11 3GPP TS 25.331: “ Radio Resource Control. Protocol Specification“. 12 3GPP TS 25.214: “Physical layer procedures (FDD) “. 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the following definitions apply: Output power: mean power of one